mplsLspBfdSessionId

FOUNDRY-MPLS-MIB · .1.3.6.1.4.1.1991.1.2.15.1.2.3.1.16
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
The BFD session ID associated to this LSP. Zero indicates
there is no BFD session for this LSP. Non-zero value is an
index to an entry in the bfdSessTable

Context

MIB
FOUNDRY-MPLS-MIB
OID
.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.16
Type
column
Access
readonly
Status
current
Parent
mplsLspEntry
Table
mplsLspTable
Siblings
37

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mplsLspSignalingProto
MPLS signaling protocol used by this LSP.
columnEnumeration.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.1
mplsLspLastTransition
The time in 10-millisecond units since the last transition occurred on this LSP.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.10
mplsLspFrom
Source IP address of this LSP.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.11
mplsLspTo
Destination IP address of this LSP.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.12
mplsLspPathName
The name of the active path for this LSP, if any. If there is none, the name should be empty; in that case, the rest of the fields in mplsLspEntry are meaningless.
columnOctetString.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.13
mplsLspPathType
The type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless unless mplsLspPathName is not empty
columnEnumeration.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.14
mplsLspAdaptive
Indicates if the LSP supports adaptive mechanism or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.15
mplsLspReoptimizeTimer
The number of seconds from the beginning of one reoptimization attempt to the beginning of the next attempt.
columnUnsigned32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.17
mplsLspCoS
The Class of Service for this LSP.
columnFDRY-MPLS-L2VPN-MIBClassOfService.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.18
mplsLspHopLimit
The number of hops this LSP can traverse.
columnUnsigned32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.19
mplsLspIndex
The unique index of the LSP in the system for a given signaling protocol.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.2
mplsLspCspf
Indicates if CSPF path calculation is enabled on this LSP.
columnEnumeration.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.20
mplsLspCspfTieBreaker
The tie-breaker to use for selecting CSPF equal-cost paths. The value of this variable is meaningless if the mplsLspCspf is 'disabled'.
columnEnumeration.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.21
mplsLspFrrMode
Indicates which protection method is to be used for Fast Reroute. 'detour' means one-to-one backup and 'facility' for facility backup.
columnEnumeration.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.22
mplsLspFrrSetupPriority
The setup priority for MPLS Fast Reroute. The value of this variable is meaningless if the mplsLspFrrMode is 'none'.
columnUnsigned32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.23
mplsLspFrrHoldingPriority
The hold priority for MPLS Fast Reroute. The value of this variable is meaningless if the mplsLspFrrMode is 'none'.
columnUnsigned32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.24
mplsLspFrrHopLimit
The hop limit for MPLS Fast Reroute. The value of this variable is meaningless if the mplsLspFrrMode is 'none'.
columnUnsigned32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.25
mplsLspFrrBandwidth
The bandwidth constraint for MPLS Fast Reroute. The value 0 means that the detour route uses a best-effort value for bandwidth. The value of this variable is meaningless if the mp…
columnUnsigned32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.26
mplsLspFrrAdmGrpIncludeAny
The administrative group setting that the device includes any of the interfaces that are members of the group when calculating detour routes for this LSP. The value of this variab…
columnMPLS-TC-STD-MIBMplsTunnelAffinity.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.27
mplsLspFrrAdmGrpIncludeAll
The administrative group setting that an interface must be a member of to be considered in a detour route for the LSP. Any interface that is not a member of all the groups is elim…
columnMPLS-TC-STD-MIBMplsTunnelAffinity.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.28
mplsLspFrrAdmGrpExcludeAny
The administrative group setting that the device excludes any of the interfaces that are members of the group when calculating detour routes for this LSP. The value of this variab…
columnMPLS-TC-STD-MIBMplsTunnelAffinity.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.29
mplsLspName
Name of the Label Switched Path.
columnOctetString.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.3
mplsLspPathSelectMode
Indicates the path selection mode to use. Auto-select is the default mode. I this mode, the primary path is always selected to carry traffic when the primary path has stayed opera…
columnEnumeration.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.30
mplsLspPathSelectPathname
The user-selected pathname when the mplsLspPathSelectMode is either 'manual' or 'unconditional'.
columnOctetString.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.31
mplsLspPathSelectRevertTimer
The number of seconds to wait after the primary or selected path comes up before traffic reverts to that path. A value of 0 indicates that it will switch immediately after the cur…
columnUnsigned32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.32
mplsLspShortcutOspfAllowed
Indicates that this LSP allows shortcut between nodes in an AS. OSPF includes the LSP in its SPF calculation.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.33
mplsLspShortcutIsisAllowed
Indicates that this LSP allows shortcut through the network to a destination based on the path's cost (metric). Traffic is forwarded through this LSP to destinations within the IS…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.34
mplsLspShortcutIsisLevel
Indicates the level of IS-IS routing enabled on the device. The value of this variable is meaningless if the mplsLspShortcutIsisAllowed is 'false'.
columnEnumeration.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.35
mplsLspShortcutIsisAnnounce
Indicates that this IS-IS shortcut will be announced or advertised. The metric to announce is specified by mplsLspShortcutIsisAnnounceMetric. The value of this variable is meaning…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.36
mplsLspShortcutIsisAnnounceMetric
Indicates the metric value to announce for this shortcut. The value of this variable is meaningless if the mplsLspShortcutIsisAnnounce is 'false'. Default value is 10.
columnInteger32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.37
mplsLspShortcutIsisRelativeMetric
Indicates the relative metric used to compute the LSP cost when announce is not enabled. The value of this variable is meaningless if the mplsLspShortcutIsisAllowed is 'false'.
columnInteger32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.38
mplsLspState
The operational state of the LSP.
columnEnumeration.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.4
mplsLspPackets
The number of egress Layer-3 VPN and IPoMPLS packets meeting the in-label and tunnel criteria.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.5
mplsLspAge
The age, since creation of this LSP in 10-millisecond periods.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.6
mplsLspTimeUp
The total time in 10-millisecond units that this LSP has been operational. The percentage up time can be determined by computing (mplsLspTimeUp/mplsLspAge * 100 %).
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.7
mplsLspPrimaryTimeUp
The total time in 10-millisecond units that this LSP's primary path has been operational. The percentage contribution of the primary path to the operational time is given by (mpls…
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.8
mplsLspTransitions
The number of state transitions (up -> down and down -> up) this LSP has undergone.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.15.1.2.3.1.9