flWorkWlanIf2ParamChannel
FL-MGD-INFRASTRUCT-MIB ·
.1.3.6.1.4.1.4346.11.11.22.30.1.5
Object
scalar
r/w
Integer32
Channel of this interface. This depends on your regional limitations and selected wlanMode. -2.4GHz Band ------ Auto (0) Channel-1 (1) Channel-2 (2) Channel-3 (3) Channel-4 (4) Channel-5 (5) Channel-6 (6) Channel-7 (7) Channel-8 (8) Channel-9 (9) Channel-10 (10) Channel-11 (11) Channel-12 (12) Channel-13 (13) Channel-14 (14) -------------------- ==================== -5GHz Band -------- Channel-36 (36) Channel-40 (40) Channel-44 (44) Channel-48 (48) Channel-52 (52) Channel-56 (56) Channel-60 (60) Channel-64 (64) Channel-132 (132) Channel-136 (136) Channel-140 (140) Channel-149 (149) Channel-153 (153) Channel-157 (157) Channel-161 (161) Channel-165 (165) Indoor8-Auto (200) Indoor16-Auto (201) Outdoor (202) Auto (203) --------------------
Context
- MIB
- FL-MGD-INFRASTRUCT-MIB
- OID
.1.3.6.1.4.1.4346.11.11.22.30.1.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- flWorkWlanIf2Parameter
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| flWorkWlanIf2ParamState State of this interface. It may be enabled or disabled. | scalar | EnabledDisabledStatus | .1.3.6.1.4.1.4346.11.11.22.30.1.1 |
| flWorkWlanIf2Fragmentation Set fragmentation thresholds. | scalar | Integer32 | .1.3.6.1.4.1.4346.11.11.22.30.1.10 |
| flWorkWlanIf2RtsCts Set RTS/CTS values. | scalar | Integer32 | .1.3.6.1.4.1.4346.11.11.22.30.1.11 |
| flWorkWlanIf2LongDistance Set Parameters for long distance link (meter). This Parameter must be equal at
master and station. Normal mode: 3000 meters. | scalar | Integer32 | .1.3.6.1.4.1.4346.11.11.22.30.1.12 |
| flWorkWlanIf2ScbMacAddress Mac address of the Device in SCB Mode. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4346.11.11.22.30.1.13 |
| flWorkWlanIf2ScbManMacMode Mac-Address assignment method in SCB Mode
disable(0) = Automatic mode. The device adopts the Mac-Address from the connected ethernet device.
enable(1) = Manual mode. Mac-Address… | scalar | Enumeration | .1.3.6.1.4.1.4346.11.11.22.30.1.14 |
| flWorkWlanIf2IAPP 802.11f Inter Accesspoint Protocol (IAPP)
disable(0) = IAPP disabled
enable(1) = IAPP enabled | scalar | Enumeration | .1.3.6.1.4.1.4346.11.11.22.30.1.15 |
| flWorkWlanIf2MachineAdmin | node | - | .1.3.6.1.4.1.4346.11.11.22.30.1.16 |
| flWorkWlanIf2ParamOpMode This textual convention is used to distinguish the WIFI operation mode of a device.
station: 0
access point (master): 1
single client bridge (scb): 2
multi client bridge (mcb): 3
… | scalar | OpModeType | .1.3.6.1.4.1.4346.11.11.22.30.1.2 |
| flWorkWlanIf2ParamSSID SSID (Service Set Identifier) for this interface. An SSID can be up to 32 characters long. Only letters, digits and the special characters: '@!$%&/()=?{}[]+*~#-_.:,;<>' are allowe… | scalar | OctetString | .1.3.6.1.4.1.4346.11.11.22.30.1.3 |
| flWorkWlanIf2ParamMode Operation mode of this interface. 1=802.11a, 2=802.11b. 3=802.11b/g, 4=802.11a/n and 5=802.11g/n for master only. | scalar | Enumeration | .1.3.6.1.4.1.4346.11.11.22.30.1.4 |
| flWorkWlanIf2ParamOutdoor If this interface is operating in 802.11a mode it must be distinguished between outdoor or indoor operation. | scalar | EnabledDisabledStatus | .1.3.6.1.4.1.4346.11.11.22.30.1.6 |
| flWorkWlanIf2AntennaOutput Mask for rx/tx-Antenna X5(1),X6(2),X7(4). e.g. Set (6) to enable x6 and x7 for rx and tx. | scalar | Integer32 | .1.3.6.1.4.1.4346.11.11.22.30.1.7 |
| flWorkWlanIf2OutputPower Set output power of WLAN interface. Current output power can be lower as defined due to regulatory limitations. | scalar | Integer32 | .1.3.6.1.4.1.4346.11.11.22.30.1.8 |
| flWorkWlanIf2STBC Set output power of WLAN interface. Current output power can be lower as defined due to regulatory limitations. | scalar | Enumeration | .1.3.6.1.4.1.4346.11.11.22.30.1.9 |