flWorkFWCtrlMRPInfoDomainAdminRole
FL-MGD-INFRASTRUCT-MIB ·
.1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.4
Object
column
Enumeration
Control the MRP behaviour of the system per
domain. Setting this value to disable(0) disables
the MRP entity of this domain.
If the value is set to client(1) the entity will
be set to a client role.
If the value is set to manager(2) the entity will
be set to a manager role.
The factory settings are recommended to adjust
the value of this object to the client(1)
capability of the component in order to prevent
multiple managers are in ring (the order of
the capabilities are not necessarily conform to
the order of the object values here).
Context
- MIB
- FL-MGD-INFRASTRUCT-MIB
- OID
.1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- flWorkFWCtrlMRPInfoDomainEntry
- Table
- flWorkFWCtrlMRPInfoDomainTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| flWorkFWCtrlMRPInfoDomainIdx Index number of the Mrp-Domain. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.1 |
| flWorkFWCtrlMRPInfoDomainRingPort2State Status of the second Ring-Port | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.10 |
| flWorkFWCtrlMRPInfoDomainState Operational status of the MRP entity.
disabled(0) - MRP switched off
invalid(1) - value not valid because of client
role
ringClosed (2) - MRP ring redundan… | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.11 |
| flWorkFWCtrlMRPInfoDomainError If the device couldn't switch to the desired
administrative state (thus the value of
'pnoMRPDomainState' is not the expected one),
this value provides the reason.
… | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.12 |
| flWorkFWCtrlMRPInfoDomainRingOpenCount Manager-only: Counter for ring-state changes. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.13 |
| flWorkFWCtrlMRPInfoDomainLastRingOpenChange Manager-only: Timeticks since last change of ring-state. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.14 |
| flWorkFWCtrlMRPInfoDomainRoundTripDelayMax Manager-only: The max. Round-Trip-Delay (in microseconds)
which was measured since startup. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.15 |
| flWorkFWCtrlMRPInfoDomainRoundTripDelayMin Manager-only: The min. Round-Trip-Delay (in microseconds)
which was measured since startup. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.16 |
| flWorkFWCtrlMRPInfoDomainUuid The IEC 61158-5-10 defines the structure of the UUID
as a data type numberic identifier 1025 | column | OctetString | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.2 |
| flWorkFWCtrlMRPInfoDomainName A logical name for the domain to ease the management of MRP domains | column | OctetString | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.3 |
| flWorkFWCtrlMRPInfoDomainOperRole The operational role of a MRP entity per
domain. A value of disabled(0) signals that the
entity doesn't work (whatever reason).
A value of client(1) signals that the entity is
in … | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.5 |
| flWorkFWCtrlMRPInfoDomainManagerPriority The priority of this MRP entity. If the device
is client only, the value of this object
will be ignored by the MRP entity.
Only the four most significant bits shall be used,
t… | column | Integer32 | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.6 |
| flWorkFWCtrlMRPInfoDomainRingPort1 The ifIndex of the layer 2 interface which is
used as ring port 1. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.7 |
| flWorkFWCtrlMRPInfoDomainRingPort1State Status of the first Ring-Port. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.8 |
| flWorkFWCtrlMRPInfoDomainRingPort2 The ifIndex of the layer 2 interface which is
used as ring port 2. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.9 |