flWorkFWCtrlHostname

FL-MGD-INFRASTRUCT-MIB · .1.3.6.1.4.1.4346.11.11.11.2.1.27
MIB view Table view

Object

scalar r/w SNMPv2-TCDisplayString 
The device will always return his hostname.
          
At the delivery time to the customer a default value
is already present. The default value consists of the device 
type and the second half of the MAC address of the device.
          
As far as he is concerned the customer can write his
own hostname later.
The hostname must have a length of 2 to 63 characters.
Only letters, numbers and hyphens (apart from the first character) are allowed.
          
If the hostname resolution is enabled, the device can be reached 
via his hostname. If mDNS is used for name resolution an additional 
.local suffix is appended to the hostname.

Context

MIB
FL-MGD-INFRASTRUCT-MIB
OID
.1.3.6.1.4.1.4346.11.11.11.2.1.27
Type
scalar
Access
readwrite
Status
current
Parent
flWorkFWCtrlBasic
Siblings
27

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
flWorkFWCtrlReset
Setting this object to reset(2) causes a hardware reset of the device and all components. Setting this object to noReset(1) has no effect. The firmware will always retu…
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.1
flWorkFWCtrlOperatingMode
This object allows the user to preselect a configuration for a special application. Please read the manual for additional information about the various settings.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.10
flWorkFWCtrlIfCounters
When set this object to clear(2), the statistic counters of all ports will be cleared. Setting this object to noClear(1) has no effect. Reading this object you get alw…
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.11
flWorkFWCtrlHTTPSecure deprecated
Setting this object enables or disables the HTTPS server on this device.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.12
flWorkFWCtrlSSH deprecated
Setting this object enables or disables the SSH server on this device.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.13
flWorkFWCtrlSNMPv3 deprecated
Setting this object enables or disables version 3 of of SNMP which is used for secure connection to the device.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.14
flWorkFwCtrlCpuOverloadStopForwarding
When set to stopForwarding(2) the device will stop forwarding packets if a CPU overload condition occurs which is shown by errorcode 89 in the display. If set to doNotStop(1) onl…
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.15
flWorkFWCtrlDisplayRights
Setting this object enables or disables configuration settings via display.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.16
flWorkFWCtrlDisplayContrast
Set or get the current display contrast of the device display
scalarInteger32.1.3.6.1.4.1.4346.11.11.11.2.1.17
flWorkFWCtrlCLIIPSock
Setting this object enables or disables CLI IP-Socket Interface.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.18
flWorkFWCtrlTrapDestCapacity obsolete
This object hold the number of trap destination entries (host ip addresses) contained in the table flWorkFWCtrlTrapDestTable.
scalarInteger32.1.3.6.1.4.1.4346.11.11.11.2.1.2
flWorkFWCtrlLEDsOff
Enable or disable LEDs Off Mode on the Device. In LEDs Off Mode no LEDs will be active.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.20
flWorkFWCtrlWebServerMode
Control the mode of the web server. The following modes exist: DISABLE (Deactivates the web interface!) HTTP (standard, unsecured), HTTPS (secured, use https://<ip…
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.21
flWorkFWCtrlSnmpAgentMode
Control the mode of the snmp agent. The following modes exist: DISABLE (Deactivates the snmp agent!) SNMPv2c (unsecured) SNMPv3 (secured, Authentication protocol: MD5,…
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.22
flWorkFWCtrlCliServiceMode
Control the mode of the snmp agent. The following modes exist: DISABLE (Deactivates the cli service!) TELNET (unsecured) SSH (secured)
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.23
flWorkFWCtrlPersistentEventLoggingMode
Enable or disable persistent storage of event table entries
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.24
flWorkFWCtrlSmartModeGblEnable
Enable or disable the smart mode functionality (mode button)
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.25
flWorkFWCtrlHostnameResolutionEnable
Enable or disable the hostname resolution via mDNS and LLMNR
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.26
flWorkFWCtrlSdCardGblEnable
Enable or disable the SD card slot.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.28
flWorkFWCtrlWebLoginRequired
Enable or disable a required user login for the web server.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.29
flWorkFWCtrlWatchdog
Setting this object to enable(2) activates the watchdog during the next restart. This Watchdog monitors the reliable operation of the device. If the reliable operation …
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.3
flWorkFWCtrlTopologyBasedIpPort
The port on which topology based ip is activated. Setting the port to zero disables the feature.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.4346.11.11.11.2.1.30
flWorkFWCtrlTopologyBasedIpState
The state of the topology based ip feature (disabled/client/root).
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.31
flWorkFWCtrlHTTP deprecated
Setting this object to disable(1) disables the web server of the device. For some products, the modified adjustments become effective after a restart of the device.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.6
flWorkFWCtrlTelnet deprecated
Setting this object to disable(1) disables the telnet server of the device. For some products, the modified adjustments become effective after a restart of the device.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.7
flWorkFWCtrlWebPageRefresh
The refresh interval in seconds for refreshing the web pages by the web browser. The granularity of this timer is 1 second. A value of zero disables the refreshing.
scalarInteger32.1.3.6.1.4.1.4346.11.11.11.2.1.8
flWorkFWCtrlSNMP deprecated
Setting this object to disable(1) disables the snmp agent of the device. For some products, the modified adjustments become effective after a restart of the device.
scalarEnumeration.1.3.6.1.4.1.4346.11.11.11.2.1.9