flWorkFWCtrlDLRVerifyFaultLocation
FL-MGD-INFRASTRUCT-MIB ·
.1.3.6.1.4.1.4346.11.11.11.2.19.1.1.21
Object
column
r/w
Enumeration
Discover the last active nodes of the ring in case of ring failure.
Context
- MIB
- FL-MGD-INFRASTRUCT-MIB
- OID
.1.3.6.1.4.1.4346.11.11.11.2.19.1.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- flWorkFWCtrlDLRDomainEntry
- Table
- flWorkFWCtrlDLRDomainTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| flWorkFWCtrlDLRDomainIdx Index number of the DLR-Domain. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.1 |
| flWorkFWCtrlDLRDeviceStatus Current status of the DLR device. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.10 |
| flWorkFWCtrlDLRRingFaultCounter Number of ring faults since last startup of the device. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.11 |
| flWorkFWCtrlDLRRingFaultCntClear Sets the Ring fault counter to zero. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.12 |
| flWorkFWCtrlDLRActiveSupervisorIP IP address of the active supervisor in the ring. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.13 |
| flWorkFWCtrlDLRActiveSupervisorMAC MAC address of the active supervisor in the ring. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.14 |
| flWorkFWCtrlDLRLastNodePort1IP IP address of the last node reachable from first ring port. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.15 |
| flWorkFWCtrlDLRLastNodePort1MAC MAC address of the last node reachable from first ring port. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.16 |
| flWorkFWCtrlDLRLastNodePort2IP IP address of the last node reachable from second ring port. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.17 |
| flWorkFWCtrlDLRLastNodePort2MAC MAC address of the last node reachable from second ring port. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.18 |
| flWorkFWCtrlDLRRapidFaultClear If device is in Rapid Fault State, it can be set back into normal state by using this object. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.19 |
| flWorkFWCtrlDLRMode Configured DLR role of this device. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.2 |
| flWorkFWCtrlDLRActivePrecedence Precedenc value of the active supervisor in the ring. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.20 |
| flWorkFWCtrlDLRRestartSignOn Update the node table. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.22 |
| flWorkFWCtrlDLRPort1 First ring port of DLR. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.3 |
| flWorkFWCtrlDLRPort2 Second ring port of DLR. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.4 |
| flWorkFWCtrlDLRBeaconInterval Beacon Interval in microseconds if device acts as supervisor. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.5 |
| flWorkFWCtrlDLRBeaconTimeout Beacon Timeout value in microseconds if device acts as supervisor. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.6 |
| flWorkFWCtrlDLRSupervisorPrecedence Configured Supervisor precedence value for this device. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.7 |
| flWorkFWCtrlDLRVlanId Configured VLAN ID which is used for DLR messages. | column | Integer32 | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.8 |
| flWorkFWCtrlDLRRingStatus Current status of the DLR ring. | column | Enumeration | .1.3.6.1.4.1.4346.11.11.11.2.19.1.1.9 |