fwlGlobalTinyFragmentFiltering

FIREWALL-MIB · .1.3.6.1.4.1.2076.16.1.5
MIB view Table view

Object

scalar deprecated r/w Status 
**************** THIS OBJECT IS DEPRECATED ****************
          
This switch is used to determine whether the inbound packets 
(packets arriving on the external interface or the interface 
connected to the Internet)containing Tiny IP Fragments are 
allowed or discarded through the Firewall. The default value 
for this switch is 'enabled'(1).

Context

MIB
FIREWALL-MIB
OID
.1.3.6.1.4.1.2076.16.1.5
Type
scalar
Access
readwrite
Status
deprecated
Parent
fwlGlobal
Siblings
27

Syntax

Status
Source
Status
Base type
Enumeration

Values & Constraints

Type Values
1enabled
2disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fwlGlobalMasterControlSwitch
This switch is used to enable or disable the entire firewall service. The default value for this switch is 'enabled' (1).
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.1
fwlGlobalMaxFilters
This specifies the maximum number of memory blocks that can be allocated for filters.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.16.1.10
fwlGlobalMaxRules
This specifies the maximum number of memory blocks that can be allocated for rules.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.16.1.11
fwlGlobalUrlFiltering
This enables or disables URL filtering. The default value for this switch is 'disable'(2).
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.12
fwlGlobalNetBiosFiltering
This enables or disables NETBIOS filtering. The default value for this switch is 'disable'(2).
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.13
fwlGlobalNetBiosLan2Wan
This enables or disables NETBIOS LAN to WAN control switch. The default value for this switch is 'disable'(2).
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.14
fwlGlobalICMPv6ControlSwitch
This switch is used to generate or suppress the ICMPv6 generation when a packet is rejected by the firewall. When this is enabled, ICMPv6 error message is generated whenever a ICM…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.16.1.15
fwlGlobalIpv6SpoofFiltering
This switch is used to determine whether the inbound packets (packets arriving on the external interface or the interface connected to the Internet)are to be examined for a pote…
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.16
fwlGlobalLogFileSize
This is the maximum file size in bytes of the firewall log file.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.16.1.17
fwlGlobalLogSizeThreshold
This is the threshold value of the Log storage space with respect to the maximum Log Storage Space. It is entered as a percentage value.
scalarUnsigned32.1.3.6.1.4.1.10876.101.1.16.1.18
fwlGlobalIdsLogSize
This is the maximum file size in bytes of the IDS log file.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.16.1.19
fwlGlobalICMPControlSwitch
This switch is used to generate or suppress the ICMP generation when a packet is rejected by the firewall. The default value for this switch is 'suppress'(2).
scalarEnumeration.1.3.6.1.4.1.10876.101.1.16.1.2
fwlGlobalIdsLogThreshold
This is the threshold value of the Log storage space with respect to the maximum Log Storage Space. It is entered as a percentage value.
scalarUnsigned32.1.3.6.1.4.1.10876.101.1.16.1.20
fwlGlobalIdsVersionInfo
This Object shows the Current version of IDS (Intrusion Detection System)
scalarOctetString.1.3.6.1.4.1.10876.101.1.16.1.21
fwlGlobalReloadIds
This Object reload IDS process (Intrusion Detection System) with the new set of rules/configurations.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.16.1.22
fwlGlobalIdsStatus
This Object is used to enable or disable IDS (Intrusion Detection System) service in the system. By default IDS is enabled.
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.23
fwlGlobalLoadIdsRules
This Object loads the existing regular expressions of rules to Pattern Matching Engine (PME) if exists. Also reloads IDS process (Intrusion Detection System). While rules load in…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.16.1.24
fwlDosAttackAcceptRedirect
This object stores the status of the Accept Redirect Dos attack
scalarEnumeration.1.3.6.1.4.1.2076.16.1.25
fwlDosAttackAcceptSmurfAttack
This object stores the status of the Smurf Dos attack
scalarEnumeration.1.3.6.1.4.1.2076.16.1.26
fwlDosLandAttack
This object stores the status of the Land Dos attack
scalarEnumeration.1.3.6.1.4.1.2076.16.1.27
fwlDosShortHeaderAttack
This object stores the status of the ShortHeader Dos attack
scalarInteger32.1.3.6.1.4.1.2076.16.1.28
fwlGlobalIpSpoofFiltering
This switch is used to determine whether the inbound packets (packets arriving on the external interface or the interface connected to the Internet)are to be examined for a pote…
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.3
fwlGlobalSrcRouteFiltering deprecated
**************** THIS OBJECT IS DEPRECATED **************** This switch is used to determine whether the inbound packets (packets arriving on the external interface …
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.4
fwlGlobalTcpIntercept
This switch is used to determine whether packets are to be examined for a potential Denial of service attack (TCP SYN Flooding attack). The default value for this switch is 'ena…
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.6
fwlGlobalTrap
This switch is used to control the different types of Trap sent to the administrator in case of memory failure or any attacks has occurred. If this switch is enabled then Trap w…
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.7
fwlGlobalTrace
This is used to enable trace statements in Firewall Module. A four byte integer value is specified for enabling the level of tracing. Each Bit in the four byte integer variable …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.16.1.8
fwlGlobalDebug
This is used to enable/disable Debug Statements in Firewall Module.
scalarStatus.1.3.6.1.4.1.10876.101.1.16.1.9