fwlGlobalTcpIntercept
FIREWALL-MIB ·
.1.3.6.1.4.1.2076.16.1.6
Object
scalar
r/w
Status
This switch is used to determine whether packets are to be examined for a potential Denial of service attack (TCP SYN Flooding attack). The default value for this switch is 'enabled'(1).
Context
- MIB
- FIREWALL-MIB
- OID
.1.3.6.1.4.1.2076.16.1.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fwlGlobal
- Siblings
- 27
Syntax
Status
- Source
- Status
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fwlGlobalMasterControlSwitch This switch is used to enable or disable the entire firewall
service. The default value for this switch is 'enabled' (1). | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.1 |
| fwlGlobalMaxFilters This specifies the maximum number of memory blocks
that can be allocated for filters. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.16.1.10 |
| fwlGlobalMaxRules This specifies the maximum number of memory blocks
that can be allocated for rules. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.16.1.11 |
| fwlGlobalUrlFiltering This enables or disables URL filtering.
The default value for this switch is 'disable'(2). | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.12 |
| fwlGlobalNetBiosFiltering This enables or disables NETBIOS filtering.
The default value for this switch is 'disable'(2). | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.13 |
| fwlGlobalNetBiosLan2Wan This enables or disables NETBIOS LAN to WAN control switch.
The default value for this switch is 'disable'(2). | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.14 |
| fwlGlobalICMPv6ControlSwitch This switch is used to generate or suppress the ICMPv6 generation
when a packet is rejected by the firewall. When this is enabled,
ICMPv6 error message is generated whenever a ICM… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.16.1.15 |
| fwlGlobalIpv6SpoofFiltering This switch is used to determine whether the inbound packets
(packets arriving on the external interface or the interface
connected to the Internet)are to be examined for a pote… | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.16 |
| fwlGlobalLogFileSize This is the maximum file size in bytes of the firewall log file. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.16.1.17 |
| fwlGlobalLogSizeThreshold This is the threshold value of the Log storage space with respect
to the maximum Log Storage Space. It is entered as a percentage value. | scalar | Unsigned32 | .1.3.6.1.4.1.10876.101.1.16.1.18 |
| fwlGlobalIdsLogSize This is the maximum file size in bytes of the IDS log file. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.1.16.1.19 |
| fwlGlobalICMPControlSwitch This switch is used to generate or suppress the ICMP generation
when a packet is rejected by the firewall. The default value for
this switch is 'suppress'(2). | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.16.1.2 |
| fwlGlobalIdsLogThreshold This is the threshold value of the Log storage space with respect
to the maximum Log Storage Space. It is entered as a percentage value. | scalar | Unsigned32 | .1.3.6.1.4.1.10876.101.1.16.1.20 |
| fwlGlobalIdsVersionInfo This Object shows the Current version of IDS (Intrusion Detection System) | scalar | OctetString | .1.3.6.1.4.1.10876.101.1.16.1.21 |
| fwlGlobalReloadIds This Object reload IDS process (Intrusion Detection System) with the
new set of rules/configurations. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.16.1.22 |
| fwlGlobalIdsStatus This Object is used to enable or disable IDS (Intrusion Detection
System) service in the system. By default IDS is enabled. | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.23 |
| fwlGlobalLoadIdsRules This Object loads the existing regular expressions of rules to Pattern
Matching Engine (PME) if exists. Also reloads IDS process
(Intrusion Detection System). While rules load in… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.1.16.1.24 |
| fwlDosAttackAcceptRedirect This object stores the status of the Accept Redirect Dos attack | scalar | Enumeration | .1.3.6.1.4.1.2076.16.1.25 |
| fwlDosAttackAcceptSmurfAttack This object stores the status of the Smurf Dos attack | scalar | Enumeration | .1.3.6.1.4.1.2076.16.1.26 |
| fwlDosLandAttack This object stores the status of the Land Dos attack | scalar | Enumeration | .1.3.6.1.4.1.2076.16.1.27 |
| fwlDosShortHeaderAttack This object stores the status of the ShortHeader Dos attack | scalar | Integer32 | .1.3.6.1.4.1.2076.16.1.28 |
| fwlGlobalIpSpoofFiltering This switch is used to determine whether the inbound packets
(packets arriving on the external interface or the interface
connected to the Internet)are to be examined for a pote… | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.3 |
| fwlGlobalSrcRouteFiltering deprecated **************** THIS OBJECT IS DEPRECATED ****************
This switch is used to determine whether the inbound packets
(packets arriving on the external interface … | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.4 |
| fwlGlobalTinyFragmentFiltering deprecated **************** THIS OBJECT IS DEPRECATED ****************
This switch is used to determine whether the inbound packets
(packets arriving on the external interface or… | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.5 |
| fwlGlobalTrap This switch is used to control the different types of Trap
sent to the administrator in case of memory failure or any
attacks has occurred. If this switch is enabled then Trap w… | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.7 |
| fwlGlobalTrace This is used to enable trace statements in Firewall Module.
A four byte integer value is specified for enabling the level
of tracing. Each Bit in the four byte integer variable … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.16.1.8 |
| fwlGlobalDebug This is used to enable/disable Debug Statements in Firewall Module. | scalar | Status | .1.3.6.1.4.1.10876.101.1.16.1.9 |