fcFxPortHoldTime
FIBRE-CHANNEL-FE-MIB ·
.1.3.6.1.2.1.75.1.1.5.1.14
Object
column
microseconds MicroSeconds
The maximum time (in microseconds) that the FxPort shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the FxPort does not support this parameter.
Context
- MIB
- FIBRE-CHANNEL-FE-MIB
- OID
.1.3.6.1.2.1.75.1.1.5.1.14- Type
- column
- Access
- readonly
- Status
- current
- Units
- microseconds
- Parent
- fcFxPortEntry
- Table
- fcFxPortTable
- Siblings
- 13
Syntax
microseconds MicroSeconds
- Source
- MicroSeconds
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fcFxPortIndex This object identifies the FxPort within the module. This
number ranges from 1 to the value of fcFeModulePortCapacity
for the associated module. The value remains constant for
th… | column | FcFeFxPortIndex | .1.3.6.1.2.1.75.1.1.5.1.1 |
| fcFxPortIntermixSupported A flag indicating whether or not the FxPort supports an
Intermixed Dedicated Connection. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.75.1.1.5.1.10 |
| fcFxPortStackedConnMode A value indicating the mode of Stacked Connect supported by
the FxPort. | column | FcStackedConnMode | .1.3.6.1.2.1.75.1.1.5.1.11 |
| fcFxPortClass2SeqDeliv A flag indicating whether or not Class 2 Sequential
Delivery is supported by the FxPort. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.75.1.1.5.1.12 |
| fcFxPortClass3SeqDeliv A flag indicating whether or not Class 3 Sequential
Delivery is supported by the FxPort. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.75.1.1.5.1.13 |
| fcFxPortName The World_wide Name of this FxPort. Each FxPort has a
unique Port World_wide Name within the Fabric. | column | FcNameId | .1.3.6.1.2.1.75.1.1.5.1.2 |
| fcFxPortFcphVersionHigh The highest or most recent version of FC-PH that the FxPort
is configured to support. | column | FcphVersion | .1.3.6.1.2.1.75.1.1.5.1.3 |
| fcFxPortFcphVersionLow The lowest or earliest version of FC-PH that the FxPort is
configured to support. | column | FcphVersion | .1.3.6.1.2.1.75.1.1.5.1.4 |
| fcFxPortBbCredit The total number of receive buffers available for holding
Class 1 connect-request, Class 2 or 3 frames from the
attached NxPort. It is for buffer-to-buffer flow control
in the di… | column | buffers FcBbCredit | .1.3.6.1.2.1.75.1.1.5.1.5 |
| fcFxPortRxBufSize The largest Data_Field Size (in octets) for an FT_1 frame
that can be received by the FxPort. | column | bytes FcRxDataFieldSize | .1.3.6.1.2.1.75.1.1.5.1.6 |
| fcFxPortRatov The Resource_Allocation_Timeout Value configured for the
FxPort. This is used as the timeout value for determining
when to reuse an NxPort resource such as a
Recovery_Qualifier. … | column | milliseconds MilliSeconds | .1.3.6.1.2.1.75.1.1.5.1.7 |
| fcFxPortEdtov The E_D_TOV value configured for the FxPort. The
Error_Detect_Timeout Value is used as the timeout value for
detecting an error condition. | column | milliseconds MilliSeconds | .1.3.6.1.2.1.75.1.1.5.1.8 |
| fcFxPortCosSupported A value indicating the set of Classes of Service supported
by the FxPort. | column | FcCosCap | .1.3.6.1.2.1.75.1.1.5.1.9 |