mplsLspPWestNextHop
FIBERSTORE-MIB ·
.1.3.6.1.4.1.52642.1.69.19.1.4
Object
West nexthop Address(IPV4) for the Lsp-p.
Context
- MIB
- FIBERSTORE-MIB
- OID
.1.3.6.1.4.1.52642.1.69.19.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mplsLspPWestEntry
- Table
- mplsLspPWestTable
- Siblings
- 13
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Enumerated Values
0 | local-lockout |
1 | local-force-switch |
2 | local-signal-fail-on-working |
3 | local-working-recover-from-signal-fail |
4 | local-signal-fail-on-protection |
5 | local-protection-recover-from-signal-fail |
6 | local-signal-degrade-on-working |
7 | local-working-recover-from-signal-degrade |
8 | local-signal-degrade-on-protection |
9 | local-protection-recover-from-signal-degrade |
10 | local-manual-switch-to-protection |
11 | local-manual-switch-to-working |
12 | local-clear |
13 | local-exercise |
14 | local-wtr-timer-expire |
15 | remote-lockout |
16 | remote-signal-fail-on-protection |
17 | remote-force-switch |
18 | remote-signal-fail-on-working |
19 | remote-signal-degrade-on-working |
20 | remote-signal-degrade-on-protection |
21 | remote-manual-switch-to-protection |
22 | remote-manual-switch-to-working |
23 | remote-wait-to-restore |
24 | remote-exercise-on-working |
25 | remote-exercise-on-protection |
26 | remote-reverse-request-on-working |
27 | remote-reverse-request-on-protection |
28 | remote-no-request-null |
29 | remote-no-request-normal |
30 | remote-do-not-revert |
31 | none |
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsLspPWestLspName Identifying value for MPLS Lsp-p. | column | OctetString | .1.3.6.1.4.1.52642.1.69.19.1.1 |
| mplsLspPWestRowStatus The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
1 means Active
4 means CreateAndGo
6 means Destroy | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.52642.1.69.19.1.10 |
| mplsLspPWestState The state of the mpls lsp-p west. The meanings of the values are:
active(1) - active;
inactive(2) - inactive; | column | Enumeration | .1.3.6.1.4.1.52642.1.69.19.1.11 |
| mplsLspPWestInlabel West incoming label of the Lsp-p. | column | Integer32 | .1.3.6.1.4.1.52642.1.69.19.1.2 |
| mplsLspPWestIngressPkts Ingress packets number of lsp-p west. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.69.19.1.20 |
| mplsLspPWestIngressbytes Ingress bytes number of lsp-p west. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.69.19.1.21 |
| mplsLspPWestEgressPkts Egress packets number of lsp-p west. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.69.19.1.22 |
| mplsLspPWestEgressBytes Egress bytes number of lsp-p west. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.52642.1.69.19.1.23 |
| mplsLspPWestOutlabel West outgoing label of the Lsp-p. | column | Integer32 | .1.3.6.1.4.1.52642.1.69.19.1.3 |
| mplsLspPWestTunnel West tunnel name. | column | OctetString | .1.3.6.1.4.1.52642.1.69.19.1.5 |
| mplsLspPWestOutIfindex Outgoing interface for the Lsp-p. Out-going
interface , tunnel, and nexthop ip address
can not be configured at the same time. | column | Integer32 | .1.3.6.1.4.1.52642.1.69.19.1.6 |
| mplsLspPWestOutMemIfindex Member port index, this field is required only when
out-going interface is vlan interface. | column | Integer32 | .1.3.6.1.4.1.52642.1.69.19.1.7 |
| mplsLspPWestReplaceExp Replace exp. | column | Enumeration | .1.3.6.1.4.1.52642.1.69.19.1.8 |