interfaceClearIPv4Addr

FIBERSTORE-MIB · .1.3.6.1.4.1.52642.1.42.1.1.14

Object

column r/w Enumeration

Clear the IPv4 address of the interface including secondary IPv4 address.0:no use, 1:clear IPv4 address.

Context

MIB: FIBERSTORE-MIB
OID: .1.3.6.1.4.1.52642.1.42.1.1.14
Type: column
Access: readwrite
Status: current
Parent: interfaceEntry
Table: interfaceTable
Siblings: 26

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
interfaceIndex Interface index. physical interface:0x1~0x3FF, agg interface: 0x400~0x7FF, vlan interface:0x1000~0x1FFF, lookback interface:0x3000~0x3FFF	column	Integer32	`.1.3.6.1.4.1.52642.1.42.1.1.1`
interfaceArpRetryInterval Set arp request retry delay value to interface. Interval range 0~3.	column	Integer32	`.1.3.6.1.4.1.52642.1.42.1.1.10`
interfaceArpTimeout Set arp age timeout value to interface. Timeout range 1~2147483.	column	Integer32	`.1.3.6.1.4.1.52642.1.42.1.1.11`
interfaceArpClear Clear arp cache.0:no use, 1:clear arp.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.12`
interfacejumboFrameEnable Jumbo frame. 1:enabel, 2:disable	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.13`
interfaceBandwidth Set bandwidth informational parameter(bandwidth in kilobits). Use 0 to set default value. The default value of 10M port is 10000. The default value of 100M port is 100000. The def…	column	Integer32	`.1.3.6.1.4.1.52642.1.42.1.1.15`
interfacePortIsolateGroupID Set the isolate group of a interface. isolate group id range is 1 ~ 31. and 255(0xFF) mean delete group.	column	Integer32	`.1.3.6.1.4.1.52642.1.42.1.1.16`
interfaceArpProxy Enable or disable arp proxy feature.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.17`
interfaceLocalArpProxy Enable or disable local arp proxy feature.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.18`
interfacePoeAdmin Set PoE port admin.The meanings of the values are: enable(1) - Enable port PoE; disable(2) - Disable port PoE; force-power(3) - Force to power on port PoE;	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.19`
interfaceName Interface name.	column	OctetString	`.1.3.6.1.4.1.52642.1.42.1.1.2`
interfacePoeBudget Set PoE port max consumption limitation (milli-watt).	column	Integer32	`.1.3.6.1.4.1.52642.1.42.1.1.20`
interfacePoePriority Set PoE port priority level. The meanings of the value are: low(1) - Low priority; high(2) - High priority; critical(3) - critical priority;	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.21`
interfaceLoadInterval Specify interval for interface speed calculation. Load-interval must be in increments of 30 seconds. The load-interval ranges from 30 to 600 and default value is 300.	column	Integer32	`.1.3.6.1.4.1.52642.1.42.1.1.22`
interfaceMtu Set MTU of the interface.	column	Integer32	`.1.3.6.1.4.1.52642.1.42.1.1.23`
interfaceIpUrpf Set IP Unicast reverse-path of the interface.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.24`
interfaceIpv6Urpf Set IPv6 Unicast reverse-path of the interface.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.25`
interfaceIpv6DadAttempt Set IPv6 Duplicate address detection attempts number.	column	Integer32	`.1.3.6.1.4.1.52642.1.42.1.1.26`
interfaceNDClear Clear arp cache.0:no use, 1:clear ND.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.27`
interfaceType The interface type.1:switch 2:route.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.3`
interfaceIPv4Addr IP addresses with mask , such as 123.123.123.123/24 .	column	OctetString	`.1.3.6.1.4.1.52642.1.42.1.1.4`
interfaceDesc Interface specific description.	column	OctetString	`.1.3.6.1.4.1.52642.1.42.1.1.5`
interfaceMediaType Specifies the port media type.0:auto-select 1:rj45 2:sfp.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.6`
interfaceSpeed Specifies the port speed.0:auto 1:10 2:100 3:1000 4:10000 5:40000 6:100000 7:2500 8:5000.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.7`
interfaceDuplex Specifies the port duplexStatus .0:auto 1:half 2:full.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.8`
interfaceResetCnt Reset interface counters; 0: noUse, 1: resetCount.	column	Enumeration	`.1.3.6.1.4.1.52642.1.42.1.1.9`

Indexes