systemPhoneFacAutoCallAcceptTime
FEC-SYSTEL-MIB ·
.0.64.1.3.1.7
Object
column
r/w
Enumeration
Setting of automatic call acceptance time, only used if 'headset' in systemPhoneAudioFac is enabled(1) and a function-key 'autoanswer' is configured and active on the system phone. For NG phones there are new values available, marked with *: immediately: phone immediately accepts calls. sec-5: phone accepts calls after 5 seconds ringing. sec-10: phone accepts calls after 10 seconds ringing. sec-15: *phone accepts calls after 15 seconds ringing (only for NG phones). sec-20: *phone accepts calls after 20 seconds ringing (only for NG phones).
Context
- MIB
- FEC-SYSTEL-MIB
- OID
.0.64.1.3.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- systemPhoneFacilityEntry
- Table
- systemPhoneFacilityTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | immediately |
2 | sec-5 |
3 | sec-10 |
4 | sec-15 |
5 | sec-20 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| systemPhoneFacIndex Reference to the mpsTerminalTable. | column | SystelTerminalIndex | .0.64.1.3.1.1 |
| systemPhoneFacDoNotDisturb Information of do not disturb setup:
disable: Do not disturb option is disabled.
quiet: Do not disturb option is enabled, without notice tone.
notice: Do not disturb option is ena… | column | Enumeration | .0.64.1.3.1.10 |
| systemPhoneFacAdminStatus Just for MIB entry deletion. | column | Enumeration | .0.64.1.3.1.11 |
| systemPhoneFacNGDisplayLight Settings for display light - this mib item is only important for NG
system phones:
sec-x: After an user action (e.g. keypress) display light is on
for dedicated time x.
always-o… | column | Enumeration | .0.64.1.3.1.12 |
| systemPhoneFacNGDoNotDisturbTone Information of do not disturb setup for NG system phones:
0: NG system phone signals incoming calls/messages
without any tone.
1..4: NG system phone signals incoming calls/mess… | column | Integer32 | .0.64.1.3.1.13 |
| systemPhoneFacNGLedConf Information of status LED function for NG system phones:
new-message: Status LED blinks if new message received,
new-call: Status LED blinks if call was missed,
call-state: Stat… | column | Bits | .0.64.1.3.1.14 |
| systemPhoneFacDisplayGeneral Facility settings for display and operation control:
softkey-style: (0) use of lower case,
(1) use of upper case for the softkeys.
clir: (0) activate number suppression
… | column | Bits | .0.64.1.3.1.2 |
| systemPhoneFacDisplayDuringCall Information shown on display during an active call:
number-and-costOrDuration(1): Shows call number and cost, if no
costs are provided by the PSTN
instead the call numbe… | column | Enumeration | .0.64.1.3.1.3 |
| systemPhoneFacLedConf Information of status LED function for elmeg CS/IP series system
phones:
indication-off: Status LED function is off.
indication-all: Status LED blinks on all new events.
indicatio… | column | Enumeration | .0.64.1.3.1.4 |
| systemPhoneFacDispLang The current display language. | column | SystelLanguage | .0.64.1.3.1.5 |
| systemPhoneFacCharacterSet The character set of the display language:
latin-ext: Latin character set with extensions.
latin-greek: Latin and greek character set.
latin-cyrillic: Latin and cyrillic characte… | column | Enumeration | .0.64.1.3.1.6 |
| systemPhoneFacCallWaitInt Setting for intern call waiting:
off: call waiting signal is disabled.
on: call waiting signal is activated (user is noticed by a
single tone). | column | Enumeration | .0.64.1.3.1.8 |
| systemPhoneFacCallWaitExt Setting for extern call waiting:
off: call waiting signal is disabled.
on: call waiting signal is activated (user is noticed by a
single tone). | column | Enumeration | .0.64.1.3.1.9 |