mpsReRouteBusyMohFileDirectory
FEC-MPS-MIB ·
.0.53.13.1.1.15
Object
Name of directory (on flash medium) which contains file to be used
for music on hold.
This variable references the entry in mpsWaveFile table where
variable mpsWaveFileDirectory has identical content.
If there should be multiple entrys with the same content for some
reason an arbitrary entry is chosen.
This entry is only valid if variable mpsReRouteBusyMoh is set
to value file.
Default value is the empty string.
Context
- MIB
- FEC-MPS-MIB
- OID
.0.53.13.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mpsReRouteEntry
- Table
- mpsReRouteTable
- Siblings
- 18
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mpsReRouteIndex A unique value for each reroute function. | column | ReRouteIndex | .0.53.13.1.1.1 |
| mpsReRouteTargetIndex This variable contains index of the target table or zero,
mpsTrunkNumberTarget=group : index = mpsGroupIndex.
mpsTrunkNumberTarget=extension : index = ExtensionIndex. | column | SNMPv2-SMIUnsigned32 | .0.53.13.1.1.10 |
| mpsReRouteTransferCond This variable contains the file/tone the calling party hears while
new target gets called.
Possible values are:
ringtone: use same tone as for ringing indication (default)
fil… | column | Enumeration | .0.53.13.1.1.11 |
| mpsReRouteAdminStatus Just for MIB entry deletion. | column | Enumeration | .0.53.13.1.1.12 |
| mpsReRoutePlayBackCnt This variable contains the playback count.
'0' = 'endless'. | column | SNMPv2-SMICounter32 | .0.53.13.1.1.13 |
| mpsReRouteAutoExchange This variable contains the call switching function
auto(1) : automatic without direct dial-in.
autoWithoutDisa(2) : automatic with direct dial-in.
autoWithDisa(3) : … | column | Enumeration | .0.53.13.1.1.14 |
| mpsReRouteBusyMohDefaultVariant This variable specifies the chosen default variant if variable
mpsReRouteBusyMoh is set to value default.
Default value for that variable is 1. | column | Integer32 | .0.53.13.1.1.16 |
| mpsReRouteAnnFileDirectory Name of directory (on flash medium) which contains file to be used
for music on hold.
This variable references the entry in mpsWaveFile table where
variable mpsWaveFileDirectory h… | column | SNMPv2-TCDisplayString | .0.53.13.1.1.17 |
| mpsReRouteTransferCondFileDirectory Name of directory (on flash medium) which contains file to be used
for music on hold.
This variable references the entry in mpsWaveFile table where
variable mpsWaveFileDirectory h… | column | SNMPv2-TCDisplayString | .0.53.13.1.1.18 |
| mpsReRouteTransferCondDefaultVariant This variable specifies the chosen default variant if variable
mpsReRouteTransferCond is set to value default.
Default value for that variable is 1. | column | Integer32 | .0.53.13.1.1.19 |
| mpsReRouteDescr This variable contains the name of the rerouting function. | column | OctetString | .0.53.13.1.1.2 |
| mpsReRouteType This variable contains type of the rerouting function. | column | Enumeration | .0.53.13.1.1.3 |
| mpsReRouteBusyQueueSize This variable contains the max. number of calls in the queue
if mpsReRouteType = onBusy. | column | Integer32 | .0.53.13.1.1.4 |
| mpsReRouteBusyMoh Incoming call can be acctepted with MoH (!= off).
This variable contains the selected music on hold (MoH).
Possible values are:
file: variable mpsReRouteBusyMohFileDirectory … | column | Enumeration | .0.53.13.1.1.5 |
| mpsReRouteBusyQueueTime This variable contains the max. time that a call will remain in the
busy queue, before droped.
'0' = 'endless' | column | s Integer32 | .0.53.13.1.1.6 |
| mpsReRouteNoReplyTime The reroute type = onNoReply allow you to configure a time interval
in seconds, after the incoming call was connected to the
announcement. | column | s Integer32 | .0.53.13.1.1.7 |
| mpsReRouteAnnouncement An incoming call to the rerouting function gets connected to this
announcement, unless it's off.
Possible values are:
file: variable mpsReRouteAnnFileDirectory specifies
d… | column | Enumeration | .0.53.13.1.1.8 |
| mpsReRouteTargetType This variable contains the target type of the rerouting function,
after the announcement finished. 'off' means the call doesn't get
dropped to an target but disconnected. | column | Enumeration | .0.53.13.1.1.9 |