mpsReRouteBusyMoh
FEC-MPS-MIB ·
.0.53.13.1.1.5
Object
column
r/w
Enumeration
Incoming call can be acctepted with MoH (!= off). This variable contains the selected music on hold (MoH). Possible values are: file: variable mpsReRouteBusyMohFileDirectory specifies directory to contain sound file default: variable mpsReRouteBusyMohDefaultVariant specifies the variant whose default is to be used (default) external: external source is used off: no music on hold active
Context
- MIB
- FEC-MPS-MIB
- OID
.0.53.13.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mpsReRouteEntry
- Table
- mpsReRouteTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
54 | file |
55 | default |
80 | external |
100 | off |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mpsReRouteIndex A unique value for each reroute function. | column | ReRouteIndex | .0.53.13.1.1.1 |
| mpsReRouteTargetIndex This variable contains index of the target table or zero,
mpsTrunkNumberTarget=group : index = mpsGroupIndex.
mpsTrunkNumberTarget=extension : index = ExtensionIndex. | column | SNMPv2-SMIUnsigned32 | .0.53.13.1.1.10 |
| mpsReRouteTransferCond This variable contains the file/tone the calling party hears while
new target gets called.
Possible values are:
ringtone: use same tone as for ringing indication (default)
fil… | column | Enumeration | .0.53.13.1.1.11 |
| mpsReRouteAdminStatus Just for MIB entry deletion. | column | Enumeration | .0.53.13.1.1.12 |
| mpsReRoutePlayBackCnt This variable contains the playback count.
'0' = 'endless'. | column | SNMPv2-SMICounter32 | .0.53.13.1.1.13 |
| mpsReRouteAutoExchange This variable contains the call switching function
auto(1) : automatic without direct dial-in.
autoWithoutDisa(2) : automatic with direct dial-in.
autoWithDisa(3) : … | column | Enumeration | .0.53.13.1.1.14 |
| mpsReRouteBusyMohFileDirectory Name of directory (on flash medium) which contains file to be used
for music on hold.
This variable references the entry in mpsWaveFile table where
variable mpsWaveFileDirectory h… | column | SNMPv2-TCDisplayString | .0.53.13.1.1.15 |
| mpsReRouteBusyMohDefaultVariant This variable specifies the chosen default variant if variable
mpsReRouteBusyMoh is set to value default.
Default value for that variable is 1. | column | Integer32 | .0.53.13.1.1.16 |
| mpsReRouteAnnFileDirectory Name of directory (on flash medium) which contains file to be used
for music on hold.
This variable references the entry in mpsWaveFile table where
variable mpsWaveFileDirectory h… | column | SNMPv2-TCDisplayString | .0.53.13.1.1.17 |
| mpsReRouteTransferCondFileDirectory Name of directory (on flash medium) which contains file to be used
for music on hold.
This variable references the entry in mpsWaveFile table where
variable mpsWaveFileDirectory h… | column | SNMPv2-TCDisplayString | .0.53.13.1.1.18 |
| mpsReRouteTransferCondDefaultVariant This variable specifies the chosen default variant if variable
mpsReRouteTransferCond is set to value default.
Default value for that variable is 1. | column | Integer32 | .0.53.13.1.1.19 |
| mpsReRouteDescr This variable contains the name of the rerouting function. | column | OctetString | .0.53.13.1.1.2 |
| mpsReRouteType This variable contains type of the rerouting function. | column | Enumeration | .0.53.13.1.1.3 |
| mpsReRouteBusyQueueSize This variable contains the max. number of calls in the queue
if mpsReRouteType = onBusy. | column | Integer32 | .0.53.13.1.1.4 |
| mpsReRouteBusyQueueTime This variable contains the max. time that a call will remain in the
busy queue, before droped.
'0' = 'endless' | column | s Integer32 | .0.53.13.1.1.6 |
| mpsReRouteNoReplyTime The reroute type = onNoReply allow you to configure a time interval
in seconds, after the incoming call was connected to the
announcement. | column | s Integer32 | .0.53.13.1.1.7 |
| mpsReRouteAnnouncement An incoming call to the rerouting function gets connected to this
announcement, unless it's off.
Possible values are:
file: variable mpsReRouteAnnFileDirectory specifies
d… | column | Enumeration | .0.53.13.1.1.8 |
| mpsReRouteTargetType This variable contains the target type of the rerouting function,
after the announcement finished. 'off' means the call doesn't get
dropped to an target but disconnected. | column | Enumeration | .0.53.13.1.1.9 |