mpsCoSFacilities
FEC-MPS-MIB ·
.0.53.6.13.1.4
Object
column
r/w
Bits
Special facilities of the class of service.
auto-trunk-req : This setting defines whether automatic
access to an outside line is to be
configured.
man-trunk-group-req: This setting defines whether manuell access
via bundle to an outside line is allowed.
route-barring: If you have configured the dialing filter
(consisting of an inhibit and release
filter) in the PBX system you can use these
settings to define whether the selected
subscriber is subject to the constraints/
privileges imposed/offered by the dialing
filter.
ars: Use ars (automatic route selection).
suppress-A-Addr: Suppress outgoing CLIP information (CLIR).
suppress-B-Addr: This value determine if Suppress number of
called party (COLR) is enabled or not.
specific-pickup : Allow specific pickup.
call-waiting : Call waiting signal for analog terminals.
ISDN terminal devices use their own special
procedures for this.
toggle-variant: Allow toggling of variant.
silent-phone-intern: Enables a silent phone for incoming
internal calls.
silent-phone-extern: Enables a silent phone for incoming
external calls.
call-through: Allow call through.
extern-diversion: You can use this setting to define whether
external call forwarding for the internal
subscriber is to be executed within the PBX
system or at the exchange.
room-supervision: Allow roomsupervision.
intercom: Allows intercom calls to the system
telephone or to another identical ISDN
telephone.
announcement: Enables to receive announcement calls.
sms: Authorizes an internal subscriber to
receive SMS messages.
msg-waiting: Message waiting indication on or off.
uus1: Authorizes an internal subscriber to
receive USS1 messages.
keypad : Authorizes an internal subscriber to carry
out KEYPAD functions.
doorIntercom-access: Authorizes an internal subscriber to
establish a connection with the door entry
phone or open the door.
tapi: Authorizes a subscriber to use the PBX's
TAPI features.
store-charge: Charge information for this subscriber will
be recorded or not.
transmit-charge-info: Charge information will be transmitted to
the subscriber or not.
use-global-rerouting: Consider global rerouting application.
Context
- MIB
- FEC-MPS-MIB
- OID
.0.53.6.13.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mpsClassOfServiceEntry
- Table
- mpsClassOfServiceTable
- Siblings
- 13
Syntax
Bits
Values & Constraints
Enumerated Values
0 | auto-trunk-req |
1 | man-trunk-group-req |
2 | route-barring |
3 | ars |
5 | suppress-A-Addr |
6 | suppress-B-Addr |
7 | specific-pickup |
8 | call-waiting |
9 | toggle-variant |
10 | silent-phone-intern |
11 | silent-phone-extern |
12 | call-through |
14 | room-supervision |
15 | intercom |
16 | announcement |
18 | msg-waiting |
19 | uus1 |
20 | keypad |
21 | doorIntercom-access |
22 | tapi |
23 | store-charge |
24 | transmit-charge-info |
25 | use-global-rerouting |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mpsCoSIndex A unique value for each class of service. | column | CoSIndex | .0.53.6.13.1.1 |
| mpsCoSTrunkBundleAccess This variable contains a bit field that allows to
selectively enable/disable manual trunk group selection. | column | - | .0.53.6.13.1.10 |
| mpsCoSMOHFileDirectory Name of directory (on flash medium) which contains file to be used
for music on hold.
This variable references the entry in mpsWaveFile table where
variable mpsWaveFileDirectory h… | column | SNMPv2-TCDisplayString | .0.53.6.13.1.11 |
| mpsCoSMOHDefaultVariant This variable specifies the chosen default variant if variable
mpsCoSMusicOnHold is set to value default.
Default value for that variable is 1. | column | Integer32 | .0.53.6.13.1.12 |
| mpsCoSTrunkCallDisplay Defines how an external trunk call shall be displayed on
Systemphones:
trunk-and-number-name(1): Show descriptions of mpsTrunkGroupTable
and mpsTrunkNumb… | column | Enumeration | .0.53.6.13.1.13 |
| mpsCoSSwitchContacts Defines which relay contact(s) may be switched by telephone
(access) dial codes.
The bit position corresponds to the SwitchingContactIndex. | column | - | .0.53.6.13.1.14 |
| mpsCoSDescription This variable contains the name of the class of service. | column | OctetString | .0.53.6.13.1.2 |
| mpsCoSDialAuthorisation Dialing privileges for a extension specifies what type of calls
(internal, external, etc. ) this extension can place. Default is
international. 'unknown' = no dialling allowed. | column | Enumeration | .0.53.6.13.1.3 |
| mpsCoSPickupGroup This variable contains the pickup group.
Only extension with the same pickup group can pickup a call from
another extension. | column | PickupGroup | .0.53.6.13.1.5 |
| mpsCoSFeatureGroup This variable contains the feature group. | column | FeatureGroup | .0.53.6.13.1.6 |
| mpsCoSPhonebookAccess Phonebook access to the global PBX phonebook.
dial-authorisation: Access the global phonebook to restrictions
resulting from entries in the
… | column | Enumeration | .0.53.6.13.1.7 |
| mpsCoSMusicOnHold This variable contains the file/tone the remote is provided with,
when call is held.
Possible values are:
file: variable mpsCoSMOHFileDirectory specifies
directory to conta… | column | Enumeration | .0.53.6.13.1.8 |
| mpsCoSAdminStatus Just for MIB entry deletion. | column | Enumeration | .0.53.6.13.1.9 |