authEapolKeyTxEnabled
FEC-AUTH-MIB ·
.0.51.1.13
Object
The EAPOL protocol optionally supports the transmission
of global key information from the Authenticator to the
Supplicant, following a successful authentication exchange,
in circumstances in which encryption is available between
the Supplicant and Authenticator systems (e.g., where
encryption is used on an 802.11 association between a
station and an access point). The use of this facility is
controlled by the KeyTransmissionEnabled parameter. A
value of TRUE allows key information to be transmitted
following authorization; a value of FALSE disables the
key transmission capability. In Authenticator systems
that do not support this facility, the KeyTransmissionEnabled
parameter is read-only and is set FALSE.
Default value is false.
Context
- MIB
- FEC-AUTH-MIB
- OID
.0.51.1.13- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- authEapol
- Siblings
- 12
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| authEapolPTK1Timeout The time after which the first EAPOL-key Message in the pairwise
temporal key negotiation phase (PTK1) is retransmitted if
there is no reply from supplicant.
Time can be changed … | scalar | milliseconds Integer32 | .0.51.1.1 |
| authEapolReAuthPeriod A period used by the reauthentication timer state machine
to determine when reauthentication of the supplicant takes place.
Time can be changed in steps of 1 seconds.
Default val… | scalar | s SNMPv2-SMIInteger32 | .0.51.1.10 |
| authEapolReAuthEnabled The state variable reAuthEnabled controls
whether periodic reauthentication takes place.
Default value is false. | scalar | SNMPv2-TCTruthValue | .0.51.1.11 |
| authEapolMaxReq The maximum number of times that the state machine will
retransmit an EAP Request packet to the supplicant before
it times out the authentication session.
Default value is 2. | scalar | Integer32 | .0.51.1.12 |
| authEapolPTK3Timeout The time after which the third EAPOL-key Message in the pairwise
temporal key negotiation phase (PTK3) is retransmitted if
there is no reply from supplicant.
Time can be changed … | scalar | milliseconds Integer32 | .0.51.1.2 |
| authEapolGTKTimeout The time after which the first EAPOL-key Message in the group
temporal key negotiation phase (GTK) is retransmitted if
there is no reply from supplicant.
Time can be changed in s… | scalar | milliseconds Integer32 | .0.51.1.3 |
| authEapolPairwiseUpdateCount The number of times EAPOL Message 1 and Message 3 in the
pairwise temporal key negotiation phase (PTK) will be
retried. | scalar | Unsigned32 | .0.51.1.4 |
| authEapolGroupUpdateCount The number of times Message 1 in the group temporal key
negotiation phase (GTK) will be retried. | scalar | Unsigned32 | .0.51.1.5 |
| authEapolAuthPeriod The time after a disassociation/deauthentication
should committed by the client if there is no
EAPOL Message from authenticator.
Time can be changed in steps of 1 seconds. | scalar | s Integer32 | .0.51.1.6 |
| authEapolQuietPeriod Period of time during which the authenticator will
not attempt to acquire a supplicant.
Time can be changed in steps of 1 seconds.
Default value is 60 seconds. | scalar | s Integer32 | .0.51.1.7 |
| authEapolTxPeriod A period used by the authenticator PAE state machine
to determine when an EAPOL PDU is to be transmitted.
Time can be changed in steps of 1 seconds.
Default value is 30 seconds. | scalar | s Integer32 | .0.51.1.8 |
| authEapolSuppTimeout A timeout used by the backend authentication state machine
in order to determine timeout conditions in the exchanges
between the authenticator and the supplicant.
Time can be ch… | scalar | s Integer32 | .0.51.1.9 |