fddimibSMTHiVersionId
FDDI-SMT73-MIB ·
.1.3.6.1.2.1.10.15.73.1.2.1.4
Object
column
mandatory
Integer32
The highest version of SMT that this station supports (refer to ANSI 7.1.2.2).
Context
- MIB
- FDDI-SMT73-MIB
- OID
.1.3.6.1.2.1.10.15.73.1.2.1.4- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- fddimibSMTEntry
- Table
- fddimibSMTTable
- Siblings
- 25
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fddimibSMTIndex mandatory A unique value for each SMT. The value for each
SMT must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initializat… | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.1 |
| fddimibSMTMasterCts mandatory The number of M Ports in a node. If the node is
not a concentrator, the value of the variable is
zero. | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.10 |
| fddimibSMTAvailablePaths mandatory A value that indicates the PATH types available
in the station.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this… | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.11 |
| fddimibSMTConfigCapabilities mandatory A value that indicates the configuration
capabilities of a node. The 'Hold Available' bit
indicates the support of the optional Hold
Function, which is controlled by
fddiSMTConfig… | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.12 |
| fddimibSMTConfigPolicy mandatory A value that indicates the configuration policies
currently desired in a node. 'Hold' is one of the
terms used for the Hold Flag, an optional ECM flag
used to enable the optional… | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.13 |
| fddimibSMTConnectionPolicy mandatory A value representing the connection policies in
effect in a node. A station sets the corresponding
bit for each of the connection types that it
rejects. The letter designations, X… | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.14 |
| fddimibSMTTNotify mandatory The timer, expressed in seconds, used in the
Neighbor Notification protocol. It has a range of
2 seconds to 30 seconds, and its default value is
30 seconds (refer to ANSI SMT 8.2). | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.15 |
| fddimibSMTStatRptPolicy mandatory If true, indicates that the node will generate
Status Reporting Frames for its implemented events
and conditions. It has an initial value of true.
This variable determines the val… | column | Enumeration | .1.3.6.1.2.1.10.15.73.1.2.1.16 |
| fddimibSMTTraceMaxExpiration mandatory Reference Trace_Max (refer to ANSI SMT
9.4.4.2.2). | column | FddiTimeMilli | .1.3.6.1.2.1.10.15.73.1.2.1.17 |
| fddimibSMTBypassPresent mandatory A flag indicating if the station has a bypass on
its AB port pair. | column | Enumeration | .1.3.6.1.2.1.10.15.73.1.2.1.18 |
| fddimibSMTECMState mandatory Indicates the current state of the ECM state
machine (refer to ANSI SMT 9.5.2). | column | Enumeration | .1.3.6.1.2.1.10.15.73.1.2.1.19 |
| fddimibSMTStationId mandatory Used to uniquely identify an FDDI station. | column | FddiSMTStationIdType | .1.3.6.1.2.1.10.15.73.1.2.1.2 |
| fddimibSMTCFState mandatory The attachment configuration for the station or
concentrator (refer to ANSI SMT 9.7.2.2). | column | Enumeration | .1.3.6.1.2.1.10.15.73.1.2.1.20 |
| fddimibSMTRemoteDisconnectFlag mandatory A flag indicating that the station was remotely
disconnected from the network as a result of
receiving an fddiSMTAction, disconnect (refer to
ANSI SMT 6.4.5.3) in a… | column | Enumeration | .1.3.6.1.2.1.10.15.73.1.2.1.21 |
| fddimibSMTStationStatus mandatory The current status of the primary and secondary
paths within this station. | column | Enumeration | .1.3.6.1.2.1.10.15.73.1.2.1.22 |
| fddimibSMTPeerWrapFlag mandatory This variable assumes the value of the
PeerWrapFlag in CFM (refer to ANSI SMT
9.7.2.4.4). | column | Enumeration | .1.3.6.1.2.1.10.15.73.1.2.1.23 |
| fddimibSMTTimeStamp mandatory This variable assumes the value of TimeStamp
(refer to ANSI SMT 8.3.2.1). | column | FddiTimeMilli | .1.3.6.1.2.1.10.15.73.1.2.1.24 |
| fddimibSMTTransitionTimeStamp mandatory This variable assumes the value of
TransitionTimeStamp (refer to ANSI SMT 8.3.2.1). | column | FddiTimeMilli | .1.3.6.1.2.1.10.15.73.1.2.1.25 |
| fddimibSMTStationAction mandatory This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
other(1): Re… | column | Enumeration | .1.3.6.1.2.1.10.15.73.1.2.1.26 |
| fddimibSMTOpVersionId mandatory The version that this station is using for its
operation (refer to ANSI 7.1.2.2). The value of
this variable is 2 for this SMT revision. | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.3 |
| fddimibSMTLoVersionId mandatory The lowest version of SMT that this station
supports (refer to ANSI 7.1.2.2). | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.5 |
| fddimibSMTUserData mandatory This variable contains 32 octets of user defined
information. The information shall be an ASCII
string. | column | OctetString | .1.3.6.1.2.1.10.15.73.1.2.1.6 |
| fddimibSMTMIBVersionId mandatory The version of the FDDI MIB of this station. The
value of this variable is 1 for this SMT
revision. | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.7 |
| fddimibSMTMACCts mandatory The number of MACs in this station or
concentrator. | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.8 |
| fddimibSMTNonMasterCts mandatory The value of this variable is the number of A, B,
and S ports in this station or concentrator. | column | Integer32 | .1.3.6.1.2.1.10.15.73.1.2.1.9 |