fddimibPORTSMTIndex
FDDI-SMT73-MIB ·
.1.3.6.1.2.1.10.15.73.5.2.1.1
Object
column
mandatory
Integer32
The value of the SMT index associated with this PORT.
Context
- MIB
- FDDI-SMT73-MIB
- OID
.1.3.6.1.2.1.10.15.73.5.2.1.1- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- fddimibPORTEntry
- Table
- fddimibPORTTable
- Siblings
- 24
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fddimibPORTAvailablePaths mandatory Indicates the Paths which are available to this
Port. In the absence of faults, the A and B Ports
will always have both the Primary and Secondary
Paths available.
T… | column | Integer32 | .1.3.6.1.2.1.10.15.73.5.2.1.10 |
| fddimibPORTPMDClass mandatory This variable indicates the type of PMD entity
associated with this port. | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.11 |
| fddimibPORTConnectionCapabilities mandatory A value that indicates the connection
capabilities of the port. The pc-mac-lct bit
indicates that the station has the capability of
setting the PC_MAC_LCT Flag. The pc-mac-loop bi… | column | Integer32 | .1.3.6.1.2.1.10.15.73.5.2.1.12 |
| fddimibPORTBSFlag mandatory This variable assumes the value of the BS_Flag
(refer to ANSI SMT 9.4.3.3). | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.13 |
| fddimibPORTLCTFailCts mandatory The count of the consecutive times the link
confidence test (LCT) has failed during connection
management (refer to ANSI 9.4.1). | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.15.73.5.2.1.14 |
| fddimibPORTLerEstimate mandatory A long term average link error rate. It ranges
from 10**-4 to 10**-15 and is reported as the
absolute value of the base 10 logarithm (refer to
ANSI SMT 9.4.7.5.). | column | Integer32 | .1.3.6.1.2.1.10.15.73.5.2.1.15 |
| fddimibPORTLemRejectCts mandatory A link error monitoring count of the times that a
link has been rejected. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.15.73.5.2.1.16 |
| fddimibPORTLemCts mandatory The aggregate link error monitor error count, set
to zero only on station initialization. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.15.73.5.2.1.17 |
| fddimibPORTLerCutoff mandatory The link error rate estimate at which a link
connection will be broken. It ranges from 10**-4
to 10**-15 and is reported as the absolute value
of the base 10 logarithm (default of… | column | Integer32 | .1.3.6.1.2.1.10.15.73.5.2.1.18 |
| fddimibPORTLerAlarm mandatory The link error rate estimate at which a link
connection will generate an alarm. It ranges from
10**-4 to 10**-15 and is reported as the absolute
value of the base 10 logarithm of … | column | Integer32 | .1.3.6.1.2.1.10.15.73.5.2.1.19 |
| fddimibPORTIndex mandatory A unique value for each PORT within a given SMT,
which is the same as the corresponding resource
index in SMT. The value for each PORT must remain
constant at least from one re-i… | column | Integer32 | .1.3.6.1.2.1.10.15.73.5.2.1.2 |
| fddimibPORTConnectState mandatory An indication of the connect state of this PORT
and is equal to the value of Connect_State (refer
to ANSI 9.4.1) | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.20 |
| fddimibPORTPCMState mandatory The state of this Port's PCM state machine refer
to ANSI SMT 9.6.2). | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.21 |
| fddimibPORTPCWithhold mandatory The value of PC_Withhold (refer to ANSI SMT
9.4.1). | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.22 |
| fddimibPORTLerFlag mandatory The condition becomes active when the value of
fddiPORTLerEstimate is less than or equal to
fddiPORTLerAlarm. This will be reported with the
Status Report Frames (SRF) (refer to A… | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.23 |
| fddimibPORTHardwarePresent mandatory This variable indicates the presence of
underlying hardware support for this Port object.
If the value of this object is false(2), the
reporting of the objects in this entry may b… | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.24 |
| fddimibPORTAction mandatory Causes a Control signal to be generated with a
control_action of 'Signal' and the 'variable'
parameter set with the appropriate value (i.e.,
PC_Maint, PC_Enable, PC_Disable, PC_St… | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.25 |
| fddimibPORTMyType mandatory The value of the PORT's PC_Type (refer to ANSI
9.4.1, and 9.6.3.2). | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.3 |
| fddimibPORTNeighborType mandatory The type of the remote PORT as determined in PCM.
This variable has an initial value of none, and is
only modified in PC_RCode(3)_Actions (refer to
ANSI SMT 9.6.3.2). | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.4 |
| fddimibPORTConnectionPolicies mandatory A value representing the PORT's connection
policies desired in the node. The value of pc-
mac-lct is a term used in the PC_MAC_LCT Flag (see
9.4.3.2). The value of pc-mac-loop is… | column | Integer32 | .1.3.6.1.2.1.10.15.73.5.2.1.5 |
| fddimibPORTMACIndicated mandatory The indications (T_Val(9), R_Val(9)) in PC-
Signalling, of the intent to place a MAC in the
output token path to a PORT (refer to ANSI SMT
9.6.3.2.). | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.6 |
| fddimibPORTCurrentPath mandatory Indicates the Path(s) into which this PORT is
currently inserted. | column | Enumeration | .1.3.6.1.2.1.10.15.73.5.2.1.7 |
| fddimibPORTRequestedPaths mandatory This variable is a list of permitted Paths where
each list element defines the Port's permitted
Paths. The first octet corresponds to 'none', the
second octet to 'tree', and the … | column | OctetString | .1.3.6.1.2.1.10.15.73.5.2.1.8 |
| fddimibPORTMACPlacement mandatory Indicates the MAC, if any, whose transmit path
exits the station via this PORT. The value shall
be zero if there is no MAC associated with the
PORT. Otherwise, the MACIndex of the… | column | FddiResourceId | .1.3.6.1.2.1.10.15.73.5.2.1.9 |