fddimibPORTAvailablePaths

FDDI-SMT73-MIB · .1.3.6.1.2.1.10.15.73.5.2.1.10

Object

column mandatory Integer32

Indicates the Paths which are available to this
Port. In the absence of faults, the A and B Ports
will always have both the Primary and Secondary
Paths available.
              
The value is a sum.  This value initially takes
the value zero, then for each type of PATH that
this port has available, 2 raised to a power is
added to the sum.  The powers are according to the
following table:
              
         Path   Power
      Primary     0
    Secondary     1
        Local     2

Context

MIB: FDDI-SMT73-MIB
OID: .1.3.6.1.2.1.10.15.73.5.2.1.10
Type: column
Access: readonly
Status: mandatory
Parent: fddimibPORTEntry
Table: fddimibPORTTable
Siblings: 24

Syntax

Integer32

Values & Constraints

Object Constraints

range: 0-7

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fddimibPORTSMTIndex mandatory The value of the SMT index associated with this PORT.	column	Integer32	`.1.3.6.1.2.1.10.15.73.5.2.1.1`
fddimibPORTPMDClass mandatory This variable indicates the type of PMD entity associated with this port.	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.11`
fddimibPORTConnectionCapabilities mandatory A value that indicates the connection capabilities of the port. The pc-mac-lct bit indicates that the station has the capability of setting the PC_MAC_LCT Flag. The pc-mac-loop bi…	column	Integer32	`.1.3.6.1.2.1.10.15.73.5.2.1.12`
fddimibPORTBSFlag mandatory This variable assumes the value of the BS_Flag (refer to ANSI SMT 9.4.3.3).	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.13`
fddimibPORTLCTFailCts mandatory The count of the consecutive times the link confidence test (LCT) has failed during connection management (refer to ANSI 9.4.1).	column	RFC1155-SMICounter	`.1.3.6.1.2.1.10.15.73.5.2.1.14`
fddimibPORTLerEstimate mandatory A long term average link error rate. It ranges from 10-4 to 10-15 and is reported as the absolute value of the base 10 logarithm (refer to ANSI SMT 9.4.7.5.).	column	Integer32	`.1.3.6.1.2.1.10.15.73.5.2.1.15`
fddimibPORTLemRejectCts mandatory A link error monitoring count of the times that a link has been rejected.	column	RFC1155-SMICounter	`.1.3.6.1.2.1.10.15.73.5.2.1.16`
fddimibPORTLemCts mandatory The aggregate link error monitor error count, set to zero only on station initialization.	column	RFC1155-SMICounter	`.1.3.6.1.2.1.10.15.73.5.2.1.17`
fddimibPORTLerCutoff mandatory The link error rate estimate at which a link connection will be broken. It ranges from 10-4 to 10-15 and is reported as the absolute value of the base 10 logarithm (default of…	column	Integer32	`.1.3.6.1.2.1.10.15.73.5.2.1.18`
fddimibPORTLerAlarm mandatory The link error rate estimate at which a link connection will generate an alarm. It ranges from 10-4 to 10-15 and is reported as the absolute value of the base 10 logarithm of …	column	Integer32	`.1.3.6.1.2.1.10.15.73.5.2.1.19`
fddimibPORTIndex mandatory A unique value for each PORT within a given SMT, which is the same as the corresponding resource index in SMT. The value for each PORT must remain constant at least from one re-i…	column	Integer32	`.1.3.6.1.2.1.10.15.73.5.2.1.2`
fddimibPORTConnectState mandatory An indication of the connect state of this PORT and is equal to the value of Connect_State (refer to ANSI 9.4.1)	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.20`
fddimibPORTPCMState mandatory The state of this Port's PCM state machine refer to ANSI SMT 9.6.2).	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.21`
fddimibPORTPCWithhold mandatory The value of PC_Withhold (refer to ANSI SMT 9.4.1).	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.22`
fddimibPORTLerFlag mandatory The condition becomes active when the value of fddiPORTLerEstimate is less than or equal to fddiPORTLerAlarm. This will be reported with the Status Report Frames (SRF) (refer to A…	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.23`
fddimibPORTHardwarePresent mandatory This variable indicates the presence of underlying hardware support for this Port object. If the value of this object is false(2), the reporting of the objects in this entry may b…	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.24`
fddimibPORTAction mandatory Causes a Control signal to be generated with a control_action of 'Signal' and the 'variable' parameter set with the appropriate value (i.e., PC_Maint, PC_Enable, PC_Disable, PC_St…	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.25`
fddimibPORTMyType mandatory The value of the PORT's PC_Type (refer to ANSI 9.4.1, and 9.6.3.2).	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.3`
fddimibPORTNeighborType mandatory The type of the remote PORT as determined in PCM. This variable has an initial value of none, and is only modified in PC_RCode(3)_Actions (refer to ANSI SMT 9.6.3.2).	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.4`
fddimibPORTConnectionPolicies mandatory A value representing the PORT's connection policies desired in the node. The value of pc- mac-lct is a term used in the PC_MAC_LCT Flag (see 9.4.3.2). The value of pc-mac-loop is…	column	Integer32	`.1.3.6.1.2.1.10.15.73.5.2.1.5`
fddimibPORTMACIndicated mandatory The indications (T_Val(9), R_Val(9)) in PC- Signalling, of the intent to place a MAC in the output token path to a PORT (refer to ANSI SMT 9.6.3.2.).	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.6`
fddimibPORTCurrentPath mandatory Indicates the Path(s) into which this PORT is currently inserted.	column	Enumeration	`.1.3.6.1.2.1.10.15.73.5.2.1.7`
fddimibPORTRequestedPaths mandatory This variable is a list of permitted Paths where each list element defines the Port's permitted Paths. The first octet corresponds to 'none', the second octet to 'tree', and the …	column	OctetString	`.1.3.6.1.2.1.10.15.73.5.2.1.8`
fddimibPORTMACPlacement mandatory Indicates the MAC, if any, whose transmit path exits the station via this PORT. The value shall be zero if there is no MAC associated with the PORT. Otherwise, the MACIndex of the…	column	FddiResourceId	`.1.3.6.1.2.1.10.15.73.5.2.1.9`