sysDot3StatMultiCollisionFrames
F5-BIGIP-SYSTEM-MIB ·
.1.3.6.1.4.1.3375.2.1.2.11.1.3.1.5
Object
column
SNMPv2-SMICounter64
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision.
Context
- MIB
- F5-BIGIP-SYSTEM-MIB
- OID
.1.3.6.1.4.1.3375.2.1.2.11.1.3.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sysDot3StatEntry
- Table
- sysDot3StatTable
- Siblings
- 18
Syntax
SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysDot3StatName The name of the interface. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.1 |
| sysDot3StatIntmacTxErrors A count of frames for which transmission on a
particular interface fails due to an internal
MAC sublayer transmit error. A frame is only
counted by an instance of this object if i… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.10 |
| sysDot3StatCarrierSenseErrors The number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a particular
interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.11 |
| sysDot3StatFrameTooLongs A count of frames received on a particular
interface that exceed the maximum permitted
frame size. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.12 |
| sysDot3StatIntmacRxErrors A count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.13 |
| sysDot3StatSymbolErrors This is a hardware counter that increments each time
a valid receiver was present and at least 1 invalid data
symbol was detected. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.14 |
| sysDot3StatDuplexStatus The current mode of operation of the MAC
entity. 'unknown' indicates that the current
duplex mode could not be determined. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.15 |
| sysDot3StatCollisionCount deprecated Deprecated! The number of per-frame media collisions for
which a particular collision histogram cell
represents the frequency on a particular
interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.16 |
| sysDot3StatCollisionFreq deprecated Deprecated! A count of individual MAC frames for which the
transmission (successful or otherwise) on a
particular interface occurs after the
frame has experienced exactly the numb… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.17 |
| sysDot3StatRateControlAbility 'true (1)' for interfaces operating at speeds above
1000 Mb/s that support Rate Control through
lowering the average data rate of the MAC
sublayer, with frame granularity, and 'fa… | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.18 |
| sysDot3StatRateControlStatus The current Rate Control mode of operation of
the MAC sublayer of this interface. | column | Enumeration | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.19 |
| sysDot3StatAlignmentErrors A count of frames received on a particular
interface that are not an integral number of
octets in length and do not pass the FCS check. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.2 |
| sysDot3StatFcsErrors A count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check. This
count does not include frames received wi… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.3 |
| sysDot3StatSingleCollisionFrames A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by exactly one collision. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.4 |
| sysDot3StatSqetestErrors A count of times that the SQE TEST ERROR
message is generated by the PLS sublayer for a
particular interface. The SQE TEST ERROR
is set in accordance with the rules for
verificati… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.6 |
| sysDot3StatDeferredTx A count of frames for which the first
transmission attempt on a particular interface
is delayed because the medium is busy.
The count represented by an instance of this
object doe… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.7 |
| sysDot3StatLateCollisions The number of times that a collision is
detected on a particular interface later than
one slotTime into the transmission of a packet. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.8 |
| sysDot3StatExcessiveCollisions A count of frames for which transmission on a
particular interface fails due to excessive
collisions.
This counter does not increment when the
interface is operating in full-duple… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.1.2.11.1.3.1.9 |