ltmLsnPoolMode
F5-BIGIP-LOCAL-MIB ·
.1.3.6.1.4.1.3375.2.2.14.2.2.1.4
Object
column
Enumeration
NAPT mode provides standard address and port translation allowing multiple clients to share the same external address. Deterministic mode provides address and port translations that can be consistently reversed so that external address and port combinations can identify specific clients.
Context
- MIB
- F5-BIGIP-LOCAL-MIB
- OID
.1.3.6.1.4.1.3375.2.2.14.2.2.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ltmLsnPoolEntry
- Table
- ltmLsnPoolTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | napt |
1 | pba |
2 | deterministic |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ltmLsnPoolName The name of a LSN Pool. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.14.2.2.1.1 |
| ltmLsnPoolIcmpEcho If true, will enable icmp-echo requests for translation addresses. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.14.2.2.1.10 |
| ltmLsnPoolTranslationPortRangeLow Specifies the low end of the range of port numbers available for use with
translation IP addresses. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.14.2.2.1.11 |
| ltmLsnPoolTranslationPortRangeHigh Specifies the high end of the range of port numbers available for use with
translation IP addresses. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.14.2.2.1.12 |
| ltmLsnPoolClientConnectionLimit Specifies the maximum number of simultaneous translated connections a client or
subscriber is allowed to have. A value of zero signifies no limit. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.14.2.2.1.13 |
| ltmLsnPoolEgressInterfacesEnabled If true, source address translation is allowed on the interfaces specified in
the egress-interfaces list. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.14.2.2.1.14 |
| ltmLsnPoolLogPublisher Specifies the name of the log publisher that logs translation events, if any. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.14.2.2.1.15 |
| ltmLsnPoolHairpinMode If enabled, will enable hairpinning for inbound connections. A hairpin connection between
two subscribers goes through the NAT device and uses translation addresses so that it
a… | column | Enumeration | .1.3.6.1.4.1.3375.2.2.14.2.2.1.16 |
| ltmLsnPoolLogProfile Specifies the name of the log profile that control the logging of translation events, if any. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.14.2.2.1.17 |
| ltmLsnPoolMemberCount The total number of members in the specified pool. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.14.2.2.1.2 |
| ltmLsnPoolRouteAdvertisement Specifies whether route advertisement is enabled or disabled for
translated IP addresses. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.14.2.2.1.3 |
| ltmLsnPoolPersistenceMode Persistence settings for LSN translation entries.
none: Specifies that there is no persistence for the translation.
address: Specifies that the translation reuses the port mapping… | column | Enumeration | .1.3.6.1.4.1.3375.2.2.14.2.2.1.5 |
| ltmLsnPoolPersistenceTimeout Maximum time-to-live for inactive translation entries. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.14.2.2.1.6 |
| ltmLsnPoolPersistencePrefixLengthIpv4 deprecated Deprecated! This field is removed.
Number of significant bits in the client IPv4 address to be used as
the persistence key. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.14.2.2.1.7 |
| ltmLsnPoolPersistencePrefixLengthIpv6 deprecated Deprecated! This field is removed.
Number of significant bits in the client IPv6 address to be used as
the persistence key. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.14.2.2.1.8 |
| ltmLsnPoolInboundConnections If true, will enable inbound connections to translation addresses and ports. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.14.2.2.1.9 |