ltmFastHttpProfileMaxHeaderSize
F5-BIGIP-LOCAL-MIB ·
.1.3.6.1.4.1.3375.2.2.6.12.1.2.1.14
Object
column
RFC1155-SMIGauge
Maximum amount of data that will be buffered in order to make a content-switching decision.
Context
- MIB
- F5-BIGIP-LOCAL-MIB
- OID
.1.3.6.1.4.1.3375.2.2.6.12.1.2.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ltmFastHttpProfileEntry
- Table
- ltmFastHttpProfileTable
- Siblings
- 21
Syntax
RFC1155-SMIGauge
- Source
- RFC1155-SMIGauge
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ltmFastHttpProfileName The name of a fast HTTP profile. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.1 |
| ltmFastHttpProfileConnpoolMinSize Minimum number of connections to any given LB pool.
0 is an acceptable value. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.10 |
| ltmFastHttpProfileConnpoolStep Connection ramp-up increment. Must be greater than 0. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.11 |
| ltmFastHttpProfileConnpoolMaxReuse Maximum number of times a server-side flow will be reused.
0 for unlimited. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.12 |
| ltmFastHttpProfileConnpoolIdleTimeout Idle timeout override for unspliced server-side flows in the
reuse pool. 0 is disabled, i.e. use the default idle timeout. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.13 |
| ltmFastHttpProfileMaxRequests Maximum number of requests on a client-side flow before
the flow is shutdown. 0 for unlimited. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.15 |
| ltmFastHttpProfileInsertXforwardedFor The state whether to insert or replace X-Forwarded-For header
with client IP. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.16 |
| ltmFastHttpProfileHttp11CloseWorkarounds The state to workaround problems with certain brands of benchmarking
software that cannot handle FIN-PUSH on HTTP/1.1 responses. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.17 |
| ltmFastHttpProfileHeaderInsert Insert the given string as a header. If the header already
exists, it is not replaced. Unlike HTTP, this string does not
support rule command expansion. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.18 |
| ltmFastHttpProfileUncleanShutdown The mode to indicate whether to do unclean shutdown for client connections. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.19 |
| ltmFastHttpProfileConfigSource The state that specifies whether this is a base/pre-configured profile
or user defined profile. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.2 |
| ltmFastHttpProfileForceHttp10Response The state to indicate whether to rewrite server's HTTP version to 1.0 in status
line in order to dissuade the client from pipelining or chunking. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.20 |
| ltmFastHttpProfileLayer7 The state that if false, we don't parse HTTP requests. This is useful for
providing SYN-proxy protection for L4 connections through a SNAT where the
client sends data to the ser… | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.21 |
| ltmFastHttpProfileConnpoolReplenish The state that specifies whether the connpool should be replenished
to its prior number of connections when a connection is closed
by the server. If this is disabled, then we w… | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.22 |
| ltmFastHttpProfileDefaultName The name of the profile from which the specified profile derives
its attribute default values. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.3 |
| ltmFastHttpProfileResetOnTimeout If true and a TCP connection exceeds its idle_timeout,
send a reset in addition to deleting the connection. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.4 |
| ltmFastHttpProfileIdleTimeout Number of seconds without traffic before a connection
is eligible for deletion. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.5 |
| ltmFastHttpProfileMssOverride If non-zero and less than the 1460 default, this value
overrides the maximum segment size for server-side flows. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.6 |
| ltmFastHttpProfileClientCloseTimeout Idle timeout override when waiting for the client to close.
This occurs after a client FIN is received or after a FIN
is sent. 0 is immediate, -1 is indefinite. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.7 |
| ltmFastHttpProfileServerCloseTimeout Idle timeout override when waiting for the server to close.
This occurs if the server flow is not suitable for reuse or
after a FIN is received on an unspliced server connection… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.8 |
| ltmFastHttpProfileConnpoolMaxSize Maximum number of connections to any given LB pool.
0 for unlimited. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.12.1.2.1.9 |