ltmDosApplicationTpsBasedMode
F5-BIGIP-LOCAL-MIB ·
.1.3.6.1.4.1.3375.2.2.6.24.2.2.1.4
Object
column
Enumeration
The operation mode of TPS-based anomaly detection .
Context
- MIB
- F5-BIGIP-LOCAL-MIB
- OID
.1.3.6.1.4.1.3375.2.2.6.24.2.2.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ltmDosApplicationEntry
- Table
- ltmDosApplicationTable
- Siblings
- 46
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | off |
1 | transparent |
2 | blocking |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ltmDosApplicationProfileName The name of a DoS profile. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.1 |
| ltmDosApplicationTpsBasedIpTpsIncreaseRate The value that specifies the percentage by which TPS increased in IP detection criteria of TPS-based anomaly.
It is only used when Source IP-based client side integrity defense an… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.10 |
| ltmDosApplicationTpsBasedIpMaximumTps The value that specifies the amount which TPS reached in IP detection criteria of TPS-based anomaly.
It is only used when Source IP-based client side integrity defense and/or rate… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.11 |
| ltmDosApplicationTpsBasedIpMinimumTps The value that specifies the minimum TPS threshold for detection in IP detection criteria of TPS-based anomaly.
It is only used when Source IP-based client side integrity defense … | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.12 |
| ltmDosApplicationTpsBasedUrlTpsIncreaseRate The value that specifies the percentage by which TPS increased in URL detection criteria of TPS-based anomaly.
It is only used when URL-based client side integrity defense and/or … | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.13 |
| ltmDosApplicationTpsBasedUrlMaximumTps The value that specifies the amount which TPS reached in URL detection criteria of TPS-based anomaly.
It is only used when URL-based client side integrity defense and/or rate limi… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.14 |
| ltmDosApplicationTpsBasedUrlMinimumTps The value that specifies the minimum TPS threshold for detection in URL detection criteria of TPS-based anomaly.
It is only used when URL-based client side integrity defense and/o… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.15 |
| ltmDosApplicationTpsBasedMaximumPreventionDuration deprecated Deprecated! Replaced by ltmDosApplicationTpsBasedEscalationPeriod and ltmDosApplicationTpsBasedDeescalationPeriod.
The value that specifies the maximum prevention duration (in sec… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.16 |
| ltmDosApplicationLatencyIncreaseRate The value that specifies the percentage by which latency increased in detection criteria of Latency-based anomaly. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.17 |
| ltmDosApplicationMaximumLatency The value that specifies the amount which latency reached (in milliseconds) in detection criteria of Latency-based anomaly. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.18 |
| ltmDosApplicationMinimumLatency The value that specifies the minimum latency threshold for detection (in milliseconds) in detection criteria of Latency-based anomaly. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.19 |
| ltmDosApplicationName The dummy name of enabled Application Security on this profile. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.2 |
| ltmDosApplicationLatencyBasedIpClientSideDefense The state indicating whether Source IP-based client side integrity defense in Latency-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.20 |
| ltmDosApplicationLatencyBasedUrlClientSideDefense The state indicating whether URL-based client side integrity defense in Latency-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.21 |
| ltmDosApplicationLatencyBasedIpRateLimiting The state indicating whether Source IP-based rate limiting in Latency-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.22 |
| ltmDosApplicationLatencyBasedUrlRateLimiting The state indicating whether URL-based rate limiting in Latency-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.23 |
| ltmDosApplicationLatencyBasedIpTpsIncreaseRate The value that specifies the percentage by which TPS increased in suspicious IP criteria of Latency-based anomaly.
It is only used when Source IP-based client side integrity defen… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.24 |
| ltmDosApplicationLatencyBasedIpMaximumTps The value that specifies the amount which TPS reached in suspicious IP criteria of Latency-based anomaly.
It is only used when Source IP-based client side integrity defense and/or… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.25 |
| ltmDosApplicationLatencyBasedIpMinimumTps The value that specifies the minimum TPS threshold for detection in suspicious IP criteria of Latency-based anomaly.
It is only used when Source IP-based client side integrity def… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.26 |
| ltmDosApplicationLatencyBasedUrlTpsIncreaseRate The value that specifies the percentage by which TPS increased in suspicious URL criteria of Latency-based anomaly.
It is only used when URL-based client side integrity defense an… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.27 |
| ltmDosApplicationLatencyBasedUrlMaximumTps The value that specifies the amount which TPS reached in suspicious URL criteria of Latency-based anomaly.
It is only used when URL-based client side integrity defense and/or rate… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.28 |
| ltmDosApplicationLatencyBasedUrlMinimumTps The value that specifies the minimum TPS threshold for detection in suspicious URL criteria of Latency-based anomaly.
It is only used when URL-based client side integrity defense … | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.29 |
| ltmDosApplicationTriggerIrule The state indicating whether Application DoS iRule event is triggered or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.3 |
| ltmDosApplicationLatencyBasedMaximumPreventionDuration deprecated Deprecated! Replaced by ltmDosApplicationLatencyBasedEscalationPeriod and ltmDosApplicationLatencyBasedDeescalationPeriod.
The value that specifies the maximum prevention duration… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.30 |
| ltmDosApplicationTpsBasedSiteClientSideDefense The state indicating whether Site-wide client side integrity defense in TPS-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.31 |
| ltmDosApplicationTpsBasedSiteRateLimiting The state indicating whether Site-wide rate limiting in TPS-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.32 |
| ltmDosApplicationTpsBasedSiteTpsIncreaseRate The value that specifies the percentage by which TPS increased in Site-wide detection criteria of TPS-based anomaly.
It is only used when Site-wide client side integrity defense a… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.33 |
| ltmDosApplicationTpsBasedSiteMaximumTps The value that specifies the amount which TPS reached in Site-wide detection criteria of TPS-based anomaly.
It is only used when Site-wide client side integrity defense and/or rat… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.34 |
| ltmDosApplicationTpsBasedSiteMinimumTps The value that specifies the minimum TPS threshold for detection in Site-wide detection criteria of TPS-based anomaly.
It is only used when Site-wide client side integrity defense… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.35 |
| ltmDosApplicationTpsBasedEscalationPeriod The value that specifies the escalation period (in seconds) in TPS-based anomaly. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.36 |
| ltmDosApplicationTpsBasedDeEscalationPeriod The value that specifies the de-escalation period (in seconds) in TPS-based anomaly. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.37 |
| ltmDosApplicationLatencyBasedSiteClientSideDefense The state indicating whether Site-wide client side integrity defense in Latency-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.38 |
| ltmDosApplicationLatencyBasedSiteRateLimiting The state indicating whether Site-wide rate limiting in Latency-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.39 |
| ltmDosApplicationLatencyBasedSiteTpsIncreaseRate The value that specifies the percentage by which TPS increased in suspicious Site-wide criteria of Latency-based anomaly.
It is only used when Site-wide client side integrity defe… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.40 |
| ltmDosApplicationLatencyBasedSiteMaximumTps The value that specifies the amount which TPS reached in suspicious Site-wide criteria of Latency-based anomaly.
It is only used when Site-wide client side integrity defense and/o… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.41 |
| ltmDosApplicationLatencyBasedSiteMinimumTps The value that specifies the minimum TPS threshold for detection in suspicious Site-wide criteria of Latency-based anomaly.
It is only used when Site-wide client side integrity de… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.42 |
| ltmDosApplicationLatencyBasedEscalationPeriod The value that specifies the escalation period (in seconds) in Latency-based anomaly. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.43 |
| ltmDosApplicationLatencyBasedDeEscalationPeriod The value that specifies the de-escalation period (in seconds) in Latency-based anomaly. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.44 |
| ltmDosApplicationHeavyUrlProtection The state indicating whether heavy URL protection is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.45 |
| ltmDosApplicationHeavyUrlAutomaticDetection The state indicating whether automatic heavy URL detection is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.46 |
| ltmDosApplicationHeavyUrlLatencyThreshold The value that specifies the latency threshold for automatic heavy URL detection (in milliseconds). | column | RFC1155-SMIGauge | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.47 |
| ltmDosApplicationLatencyBasedMode The operation mode of Latency-based anomaly detection. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.5 |
| ltmDosApplicationTpsBasedIpClientSideDefense The state indicating whether Source IP-based client side integrity defense in TPS-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.6 |
| ltmDosApplicationTpsBasedUrlClientSideDefense The state indicating whether URL-based client side integrity defense in TPS-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.7 |
| ltmDosApplicationTpsBasedIpRateLimiting The state indicating whether Source IP-based rate limiting in TPS-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.8 |
| ltmDosApplicationTpsBasedUrlRateLimiting The state indicating whether URL-based rate limiting in TPS-based anomaly is enabled or not. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.24.2.2.1.9 |