ltmDiameterrouterProfileTrafficGroup
F5-BIGIP-LOCAL-MIB ·
.1.3.6.1.4.1.3375.2.2.6.40.1.2.1.5
Object
column
F5-BIGIP-COMMON-MIBLongDisplayString
The traffic group for the router instance. All virtual servers using this router profile will have the their traffic group replaced by the traffic group of the router profile.
Context
- MIB
- F5-BIGIP-LOCAL-MIB
- OID
.1.3.6.1.4.1.3375.2.2.6.40.1.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ltmDiameterrouterProfileEntry
- Table
- ltmDiameterrouterProfileTable
- Siblings
- 16
Syntax
F5-BIGIP-COMMON-MIBLongDisplayString
- Source
- F5-BIGIP-COMMON-MIBLongDisplayString
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..1024
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ltmDiameterrouterProfileName The Name of the diameterrouter profile. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.1 |
| ltmDiameterrouterProfileHaMsgSweeperInterval This attribute sets the
frequency of the mirrored message sweeper. For virtual servers
where mirroring is enabled, the received messages will be
processed on both the active devic… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.10 |
| ltmDiameterrouterProfilePendingReqSweeperInterval This attribute sets the
frequency for the pending request sweeper. When run, data retained
to assist with forwarding received answer messages will be removed
if it is older than t… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.11 |
| ltmDiameterrouterProfileUseLocalConnection Controls whether connections
established by the ingress TMM are preferred over connections
established by other TMMs when selecting egress connection to
destination peer. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.12 |
| ltmDiameterrouterProfileTransactionTimeout Specifies the maximum time in
seconds between request and its response. A provisional response
restarts the timer. This may not affect all transactions. The
scenarios where BIG-IP… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.13 |
| ltmDiameterrouterProfileMaxRetries The maximum number of attempts to retry
creating a connection to a peer. Once reached, all pending
messages will be flagged as undeliverable and returned to the
originator. A defa… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.14 |
| ltmDiameterrouterProfileIruleScopeMessage An attribute in a
MR (message-routing) diameter router profile that causes Diameter
iRule events to be processed in the scope of the executing
message, rather than one by one in t… | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.15 |
| ltmDiameterrouterProfilePerPeerStats If set to true, the profile specific statistics
will be captured for each pool member. The default value is false. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.16 |
| ltmDiameterrouterProfileAssociateClientsideToPmbr If set to true, the configured
routes will be scanned for a pool member that matches a new clientside
connection. If found, the clientside connection will be associated with
the p… | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.17 |
| ltmDiameterrouterProfileConfigSource The state that specifies whether this is a base/pre-configured profile
or user defined profile. | column | Enumeration | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.2 |
| ltmDiameterrouterProfileDefaultName The name of the profile from which the specified profile derives
its attribute default values. | column | F5-BIGIP-COMMON-MIBLongDisplayString | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.3 |
| ltmDiameterrouterProfileMirrored Enables mirroring of all incoming connections
for all virtual servers using this router instance, and all
outgoing connection created by this router instance. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.4 |
| ltmDiameterrouterProfileSupportedApplications List of supported application-ids | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.6 |
| ltmDiameterrouterProfileIgnorePeerPort If set, the remote port on the peers
connecting to BIGIP is ignored when searching for an existing
connection. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.7 |
| ltmDiameterrouterProfileMaxPendingMessages The maximum number of pending
messages that are held while waiting for a connection to a peer to
be created. Once reached any additional messages to the peer are
flagged as undeli… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.8 |
| ltmDiameterrouterProfileMaxPendingBytes The maximum number of bytes
contained within pending messages that are held while waiting for
a connection to a peer to be created. Once reached any additional
messages to the pee… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3375.2.2.6.40.1.2.1.9 |