f3TwampSessionSenderTestPattern
F3-TWAMP-MIB ·
.1.3.6.1.4.1.2544.1.12.33.1.8.1.14
Object
column
TwampTestPattern
This the pattern of the bytes in the padding of the TWAMP Test packet.
Context
- MIB
- F3-TWAMP-MIB
- OID
.1.3.6.1.4.1.2544.1.12.33.1.8.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- f3TwampSessionSenderEntry
- Table
- f3TwampSessionSenderTable
- Siblings
- 34
Syntax
TwampTestPattern
- Source
- TwampTestPattern
- Base type
Enumeration
Values & Constraints
Type Values
1 | allZeros |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3TwampSessionSenderIndex An integer index value used to uniquely identify
a TWAMP Session Sender under the NE. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.1 |
| f3TwampSessionSenderSrUdpPort This is the UDP Port recommended by the Session Sender
for the Session Reflector for TWAMP Test. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.10 |
| f3TwampSessionSenderDscpValue This is the TWAMP Test packet DSCP value to be used in the IP header.
This is read-create when the TWAMP Control is disabled. When TWAMP
Control is enabled this will be read-only … | column | Unsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.11 |
| f3TwampSessionSenderNumPkts This is the number TWAMP test packets to send for test session. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.12 |
| f3TwampSessionSenderPktSize This is the size of the TWAMP test packet. For unauthenticated mode,
Minimum is the 18 (Eth Hdr) + 20 (IP Hdr) + 41 (TWAMP) Bytes.
The TWAMP test packet will be padded to the spec… | column | Unsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.13 |
| f3TwampSessionSenderStartTimeType This indicates the start time type which tells how to interpret
the start time attribute.
If IMMEDIATE, f3TwampSessionSenderStartTime is not applicable
If RELATIVE,… | column | TwampStartTimeType | .1.3.6.1.4.1.2544.1.12.33.1.8.1.15 |
| f3TwampSessionSenderStartDate This is the date part of the Session Sender start time. When TWAMP Control
is enabled, the Date and Time are converted to the NTP timestamp format as
defined in RFC 1305 [REF13] t… | column | OctetString | .1.3.6.1.4.1.2544.1.12.33.1.8.1.16 |
| f3TwampSessionSenderStartTime This is the time part of the Session Sender start time. When TWAMP Control
is enabled, the Date and Time are converted to the NTP timestamp format as
defined in RFC 1305 [REF13] t… | column | OctetString | .1.3.6.1.4.1.2544.1.12.33.1.8.1.17 |
| f3TwampSessionSenderRespTimeout This is how much time the Session Sender will wait for the response to a
TWAMP Test packet. In effect the TWAMP Test is complete after Test
Duration + Response Timeout. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.18 |
| f3TwampSessionSenderVlanEnabled This indicates whether the TWAMP Test packets are tagged or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.33.1.8.1.19 |
| f3TwampSessionSenderAdminState All the state related attributes are added to support this entity
being in outage state. But AdminState is always InService and is
not editable. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.33.1.8.1.2 |
| f3TwampSessionSenderOuterVlanId This specifies the outer VLAN ID. This is applicable if
f3TwampSessionSenderVlanEnabled is true. | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.33.1.8.1.20 |
| f3TwampSessionSenderOuterVlanPriority This specifies the outer VLAN priority. This is applicable if
f3TwampSessionSenderVlanEnabled is true. | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.33.1.8.1.21 |
| f3TwampSessionSenderOuterVlanEtherType This specifies the outer VLAN tag Ethertype/TPID. This is applicable if
f3TwampSessionSenderVlanEnabled is true. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.22 |
| f3TwampSessionSenderInnerVlanEnabled This indicates whether the TWAMP Test packets are double tagged or not.
This is applicable only if f3TwampSessionSenderVlanEnabled is true. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.33.1.8.1.23 |
| f3TwampSessionSenderInnerVlanId This specifies the inner VLAN ID. This is applicable if
f3TwampSessionSenderInnerVlanEnabled is true. | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.33.1.8.1.24 |
| f3TwampSessionSenderInnerVlanPriority This specifies the inner VLAN priority. This is applicable if
f3TwampSessionSenderInnerVlanEnabled is true. | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.33.1.8.1.25 |
| f3TwampSessionSenderInnerVlanEtherType This specifies the outer VLAN tag Ethertype/TPID. This is applicable if
f3TwampSessionSenderInnerVlanEnabled is true. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.26 |
| f3TwampSessionSenderSeqNumber This is the session sender sequence number that is set in the generated
TWAMP Test packet. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.27 |
| f3TwampSessionSenderStatus This indicates the current state of the Session Sender state machine. | column | TwampSessionSenderStatus | .1.3.6.1.4.1.2544.1.12.33.1.8.1.28 |
| f3TwampSessionSenderAssocControlClient This is the pointer to the associated TWAMP Control Client. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.33.1.8.1.29 |
| f3TwampSessionSenderOperationalState Operational state can take Normal or Outage. When the TWAMP entity
is operational then this is Normal. In some situations like a Card
is unplugged and TWAMP entity is not operatio… | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.33.1.8.1.3 |
| f3TwampSessionSenderHistoryBins This object allows specification of number of history bins.
This is the total history data that will be maintained
for a Session Sender run, at any instance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.30 |
| f3TwampSessionSenderHistoryInterval This object allows specification of the history interval
period. | column | TwampHistoryIntervalType | .1.3.6.1.4.1.2544.1.12.33.1.8.1.31 |
| f3TwampSessionSenderDistHistoryBins This object allows specification of number of distribution
history bins. This is the total history distribution data that
will be maintained for a Session Sender run, at any insta… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.32 |
| f3TwampSessionSenderDistHistoryInterval This object allows specification of the history distribution
interval period. | column | TwampHistoryIntervalType | .1.3.6.1.4.1.2544.1.12.33.1.8.1.33 |
| f3TwampSessionSenderStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.33.1.8.1.34 |
| f3TwampSessionSenderRowStatus The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.33.1.8.1.35 |
| f3TwampSessionSenderSecondaryState Secondary state can be Active or SGEO. When Operational state is
Normal this is Active. When Operational State is Outage then this
is SGEO. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.33.1.8.1.4 |
| f3TwampSessionSenderAlias An alias associated with the TWAMP Session Sender. | column | OctetString | .1.3.6.1.4.1.2544.1.12.33.1.8.1.5 |
| f3TwampSessionSenderIpInterface This is the IP interface used by Session Sender.
Session Sender may use the same IP interface as any Control Client,
Server, Session Sender or Session Sender in the system as long… | column | OctetString | .1.3.6.1.4.1.2544.1.12.33.1.8.1.6 |
| f3TwampSessionSenderUdpPort This is the UDP Port used by the Session Sender for TWAMP Test.
The Combination of f3TwampSessionSenderIpInterface and
f3TwampSessionSenderUdpPort shall be unique amongst all
Se… | column | Unsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.7 |
| f3TwampSessionSenderPktSchedTimeInterval This is the time interval between TWAMP-Test packets. | column | Unsigned32 | .1.3.6.1.4.1.2544.1.12.33.1.8.1.8 |
| f3TwampSessionSenderSrIpv4Address This is the IPv4 address of the Session Reflector. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.33.1.8.1.9 |