f3TwampSessionSenderStartTime

F3-TWAMP-MIB · .1.3.6.1.4.1.2544.1.12.33.1.8.1.17
MIB view Table view

Object

column r/w OctetString 
This is the time part of the Session Sender start time. When TWAMP Control
is enabled, the Date and Time are converted to the NTP timestamp format as
defined in RFC 1305 [REF13] to send in Request-TW-Session message. 
The first 32 bits are the seconds since 0h Jan 1 1900 and the second 32 bits
is the fractional second and is the number of units of 200 picoseconds.
              
If f3TwampSessionSenderStartTimeType is IMMEDIATE, this attribute is not applicable.
If f3TwampSessionSenderStartTimeType is RELATIVE, this attribute is not applicable.
If f3TwampSessionSenderStartTimeType is FIXED, this attribute is the time
when to start the test.

Context

MIB
F3-TWAMP-MIB
OID
.1.3.6.1.4.1.2544.1.12.33.1.8.1.17
Type
column
Access
readwrite
Status
current
Parent
f3TwampSessionSenderEntry
Table
f3TwampSessionSenderTable
Siblings
34

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-0 range: 8-8

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
f3TwampSessionSenderIndex
An integer index value used to uniquely identify a TWAMP Session Sender under the NE.
columnInteger32.1.3.6.1.4.1.2544.1.12.33.1.8.1.1
f3TwampSessionSenderSrUdpPort
This is the UDP Port recommended by the Session Sender for the Session Reflector for TWAMP Test.
columnUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.10
f3TwampSessionSenderDscpValue
This is the TWAMP Test packet DSCP value to be used in the IP header. This is read-create when the TWAMP Control is disabled. When TWAMP Control is enabled this will be read-only …
columnUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.11
f3TwampSessionSenderNumPkts
This is the number TWAMP test packets to send for test session.
columnUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.12
f3TwampSessionSenderPktSize
This is the size of the TWAMP test packet. For unauthenticated mode, Minimum is the 18 (Eth Hdr) + 20 (IP Hdr) + 41 (TWAMP) Bytes. The TWAMP test packet will be padded to the spec…
columnUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.13
f3TwampSessionSenderTestPattern
This the pattern of the bytes in the padding of the TWAMP Test packet.
columnTwampTestPattern.1.3.6.1.4.1.2544.1.12.33.1.8.1.14
f3TwampSessionSenderStartTimeType
This indicates the start time type which tells how to interpret the start time attribute. If IMMEDIATE, f3TwampSessionSenderStartTime is not applicable If RELATIVE,…
columnTwampStartTimeType.1.3.6.1.4.1.2544.1.12.33.1.8.1.15
f3TwampSessionSenderStartDate
This is the date part of the Session Sender start time. When TWAMP Control is enabled, the Date and Time are converted to the NTP timestamp format as defined in RFC 1305 [REF13] t…
columnOctetString.1.3.6.1.4.1.2544.1.12.33.1.8.1.16
f3TwampSessionSenderRespTimeout
This is how much time the Session Sender will wait for the response to a TWAMP Test packet. In effect the TWAMP Test is complete after Test Duration + Response Timeout.
columnUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.18
f3TwampSessionSenderVlanEnabled
This indicates whether the TWAMP Test packets are tagged or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.33.1.8.1.19
f3TwampSessionSenderAdminState
All the state related attributes are added to support this entity being in outage state. But AdminState is always InService and is not editable.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.33.1.8.1.2
f3TwampSessionSenderOuterVlanId
This specifies the outer VLAN ID. This is applicable if f3TwampSessionSenderVlanEnabled is true.
columnCM-COMMON-MIBVlanId.1.3.6.1.4.1.2544.1.12.33.1.8.1.20
f3TwampSessionSenderOuterVlanPriority
This specifies the outer VLAN priority. This is applicable if f3TwampSessionSenderVlanEnabled is true.
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.33.1.8.1.21
f3TwampSessionSenderOuterVlanEtherType
This specifies the outer VLAN tag Ethertype/TPID. This is applicable if f3TwampSessionSenderVlanEnabled is true.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.22
f3TwampSessionSenderInnerVlanEnabled
This indicates whether the TWAMP Test packets are double tagged or not. This is applicable only if f3TwampSessionSenderVlanEnabled is true.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.33.1.8.1.23
f3TwampSessionSenderInnerVlanId
This specifies the inner VLAN ID. This is applicable if f3TwampSessionSenderInnerVlanEnabled is true.
columnCM-COMMON-MIBVlanId.1.3.6.1.4.1.2544.1.12.33.1.8.1.24
f3TwampSessionSenderInnerVlanPriority
This specifies the inner VLAN priority. This is applicable if f3TwampSessionSenderInnerVlanEnabled is true.
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.33.1.8.1.25
f3TwampSessionSenderInnerVlanEtherType
This specifies the outer VLAN tag Ethertype/TPID. This is applicable if f3TwampSessionSenderInnerVlanEnabled is true.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.26
f3TwampSessionSenderSeqNumber
This is the session sender sequence number that is set in the generated TWAMP Test packet.
columnUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.27
f3TwampSessionSenderStatus
This indicates the current state of the Session Sender state machine.
columnTwampSessionSenderStatus.1.3.6.1.4.1.2544.1.12.33.1.8.1.28
f3TwampSessionSenderAssocControlClient
This is the pointer to the associated TWAMP Control Client.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.33.1.8.1.29
f3TwampSessionSenderOperationalState
Operational state can take Normal or Outage. When the TWAMP entity is operational then this is Normal. In some situations like a Card is unplugged and TWAMP entity is not operatio…
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.33.1.8.1.3
f3TwampSessionSenderHistoryBins
This object allows specification of number of history bins. This is the total history data that will be maintained for a Session Sender run, at any instance.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.30
f3TwampSessionSenderHistoryInterval
This object allows specification of the history interval period.
columnTwampHistoryIntervalType.1.3.6.1.4.1.2544.1.12.33.1.8.1.31
f3TwampSessionSenderDistHistoryBins
This object allows specification of number of distribution history bins. This is the total history distribution data that will be maintained for a Session Sender run, at any insta…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.32
f3TwampSessionSenderDistHistoryInterval
This object allows specification of the history distribution interval period.
columnTwampHistoryIntervalType.1.3.6.1.4.1.2544.1.12.33.1.8.1.33
f3TwampSessionSenderStorageType
The type of storage configured for this entry.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.2544.1.12.33.1.8.1.34
f3TwampSessionSenderRowStatus
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each w…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.12.33.1.8.1.35
f3TwampSessionSenderSecondaryState
Secondary state can be Active or SGEO. When Operational state is Normal this is Active. When Operational State is Outage then this is SGEO.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.33.1.8.1.4
f3TwampSessionSenderAlias
An alias associated with the TWAMP Session Sender.
columnOctetString.1.3.6.1.4.1.2544.1.12.33.1.8.1.5
f3TwampSessionSenderIpInterface
This is the IP interface used by Session Sender. Session Sender may use the same IP interface as any Control Client, Server, Session Sender or Session Sender in the system as long…
columnOctetString.1.3.6.1.4.1.2544.1.12.33.1.8.1.6
f3TwampSessionSenderUdpPort
This is the UDP Port used by the Session Sender for TWAMP Test. The Combination of f3TwampSessionSenderIpInterface and f3TwampSessionSenderUdpPort shall be unique amongst all Se…
columnUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.7
f3TwampSessionSenderPktSchedTimeInterval
This is the time interval between TWAMP-Test packets.
columnUnsigned32.1.3.6.1.4.1.2544.1.12.33.1.8.1.8
f3TwampSessionSenderSrIpv4Address
This is the IPv4 address of the Session Reflector.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.12.33.1.8.1.9