f3SyncJPTPNetworkProbeSlaveIpV4Address
F3-SYNCJACK-MIB ·
.1.3.6.1.4.1.2544.1.12.22.1.9.1.8
Object
This object allows SNMP management entities to specify the Slave IP Address associated with the PTP Network Probe.
Context
- MIB
- F3-SYNCJACK-MIB
- OID
.1.3.6.1.4.1.2544.1.12.22.1.9.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f3SyncJPTPNetworkProbeEntry
- Table
- f3SyncJPTPNetworkProbeTable
- Siblings
- 32
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3SyncJPTPNetworkProbeIndex Unique index value associated with the PTP Network Probe. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.1 |
| f3SyncJPTPNetworkProbeReference This object allows setting up of the PTP Network Probe
Reference Entity. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.22.1.9.1.10 |
| f3SyncJPTPNetworkProbeExpectedQL This object represents the minimum expected Quality Level
when bits-in and sync-e PHY are references. | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.22.1.9.1.11 |
| f3SyncJPTPNetworkProbeActualTestStartTime This object provides information on the actual test start time. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.22.1.9.1.12 |
| f3SyncJPTPNetworkProbeActualTestDuration This object provides information on the actual test duration in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.13 |
| f3SyncJPTPNetworkProbePDVAssuredHi This object allows configuration of the higher order 32 bits of the
assured level packet delay variation network limit for the PTP
Network Probe, in nanoseconds.
This helps in … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.14 |
| f3SyncJPTPNetworkProbePDVAssuredLo This object allows configuration of the lower order 32 bits of the
assured level packet delay variation network limit for the PTP
Network Probe, in nanoseconds.
This helps in c… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.15 |
| f3SyncJPTPNetworkProbePDVSatisfiedHi This object allows configuration of the higher order 32 bits of the
satisfied level of packet delay variation network limit for the
PTP Network Probe, in nanoseconds.
This helps … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.16 |
| f3SyncJPTPNetworkProbePDVSatisfiedLo This object allows configuration of the lower order 32 bits of the
satisfied level of packet delay variation network limit for the
PTP Network Probe, in nanoseconds.
This helps … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.17 |
| f3SyncJPTPNetworkProbeResPDVFwdLowRange This object allows configuration of the low range for
Residual Path Delay Variation statistics in the forward
direction (i.e. master to slave), in nanoseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.18 |
| f3SyncJPTPNetworkProbeResPDVFwdMediumRange This object allows configuration of the medium range for
Residual Path Delay Variation statistics in the forward
direction (i.e. master to slave), in nanoseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.19 |
| f3SyncJPTPNetworkProbeName This object allows SNMP management entities to provide a
name to the PTP Network Probe entity. | column | OctetString | .1.3.6.1.4.1.2544.1.12.22.1.9.1.2 |
| f3SyncJPTPNetworkProbeResPDVFwdHighRange This object allows configuration of the high range for
Residual Path Delay Variation statistics in the forward
direction (i.e. master to slave), in nanoseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.20 |
| f3SyncJPTPNetworkProbeResPDVRevLowRange This object allows configuration of the low range for
Residual Path Delay Variation statistics in the reverse
direction (i.e. slave to master), in nanoseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.21 |
| f3SyncJPTPNetworkProbeResPDVRevMediumRange This object allows configuration of the medium range for
Residual Path Delay Variation statistics in the reverse
direction (i.e. slave to master), in nanoseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.22 |
| f3SyncJPTPNetworkProbeResPDVRevHighRange This object allows configuration of the high range for
Residual Path Delay Variation statistics in the reverse
direction (i.e. slave to master), in nanoseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.23 |
| f3SyncJPTPNetworkProbeScheduler This object provides the associated scheduler instance, if one
exists, with this PTP Network Probe. This value is 0.0, if there is no
scheduler associated with the PTP Network Pr… | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.22.1.9.1.24 |
| f3SyncJPTPNetworkProbeTestState This object provides the PTP Network Probe test state. | column | SyncJackTestState | .1.3.6.1.4.1.2544.1.12.22.1.9.1.25 |
| f3SyncJPTPNetworkProbeNoTimestampFailure This object provides information on whether the measured PTP source
indicated a no-timestamp failure. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.22.1.9.1.26 |
| f3SyncJPTPNetworkProbeNoEventMessageFailure This object provides information on whether the measured PTP source
indicated a no-event message failure. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.22.1.9.1.27 |
| f3SyncJPTPNetworkProbeFwdScore This object provides the current score in the forward direction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.28 |
| f3SyncJPTPNetworkProbeRevScore This object provides the current score in the reverse direction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.22.1.9.1.29 |
| f3SyncJPTPNetworkProbeAdminState This object represents the Administrative State of the
PTP Network Probe. This is not externally managed. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.22.1.9.1.3 |
| f3SyncJPTPNetworkProbeReferenceFailure This object provides information on whether the reference failed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.22.1.9.1.30 |
| f3SyncJPTPNetworkProbeStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.22.1.9.1.31 |
| f3SyncJPTPNetworkProbeRowStatus The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.22.1.9.1.32 |
| f3SyncJPTPNetworkProbeResultsAvailable The results available configured for this entry. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.22.1.9.1.33 |
| f3SyncJPTPNetworkProbeOperationalState This object represents the Operational State of the PTP Network Probe. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.22.1.9.1.4 |
| f3SyncJPTPNetworkProbeSecondaryState This object represents the Secondary State of the PTP Network Probe. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.22.1.9.1.5 |
| f3SyncJPTPNetworkProbePTPFlowPoint This object allows SNMP management entities to specify the
PTP Flow Point to use as source for PTP Network Probe measurements. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.22.1.9.1.6 |
| f3SyncJPTPNetworkProbeIpPrototocol This object allows SNMP management entities to specify the
IP Protocol used for PTP communication. | column | CM-COMMON-MIBIpVersion | .1.3.6.1.4.1.2544.1.12.22.1.9.1.7 |
| f3SyncJPTPNetworkProbeMasterIpV4Address This object allows SNMP management entities to specify the
Master IP Address associated with the PTP Network Probe. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.22.1.9.1.9 |