f3Pwe3SatopTDMEntity

F3-PWE3-MIB · .1.3.6.1.4.1.2544.1.12.19.1.6.1.6
MIB view Table view

Object

column r/w SNMPv2-TCVariablePointer 
This object allows specification of the T1/E1 entity
associated with the SAToP.  This is only used at
SATop creation time. Result of get operation on this object
will result with zeroDotZero since one Satop could have more
then one associated TDM entity. Subsequently, the associated
TDM entities are managed via f3Pwe3SatopTDMEntityTable.

Context

MIB
F3-PWE3-MIB
OID
.1.3.6.1.4.1.2544.1.12.19.1.6.1.6
Type
column
Access
readwrite
Status
current
Parent
f3Pwe3SatopEntry
Table
f3Pwe3SatopTable
Siblings
26

Syntax

SNMPv2-TCVariablePointer
Source
SNMPv2-TCVariablePointer
Base type
ObjectIdentifier

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
f3Pwe3SatopIndex
Unique index value associated with the SAToP Entity.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.19.1.6.1.1
f3Pwe3SatopEncapsulationType
This object allows ability to specify the encapsulation type of the SATop. It can be encapsulated with VLAN and single MPLS label(vlan-one-mpls-label), VLAN and two MPLS labels…
columnPWE3SatopEncapsulationType.1.3.6.1.4.1.2544.1.12.19.1.6.1.10
f3Pwe3SatopRTPEnabled
This object enables/disables RTP header for this SATop instance.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.19.1.6.1.11
f3Pwe3SatopRTPUpdateFrequency
When f3Pwe3SatopRTPEnabled is true, this object allows specification of the RTP clock update frequency.
columnPWE3SatopRTPTSUpdateFreqType.1.3.6.1.4.1.2544.1.12.19.1.6.1.12
f3Pwe3SatopControlWordEnabled
This object is used for 3rd party interoperability, since earlier versions of PWE do not support control-word.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.19.1.6.1.13
f3Pwe3SatopJitterBufferSize
This object allows definition of size of the jitter buffer in microseconds for this SATop instance.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.19.1.6.1.14
f3Pwe3SatopPayloadSize
This object allows specification of the SATop payload size.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.19.1.6.1.15
f3Pwe3SatopVlanId
This object allows specification of the SATop VLAN Id. Applicable for vlan based encapsulation types.
columnCM-COMMON-MIBVlanId.1.3.6.1.4.1.2544.1.12.19.1.6.1.16
f3Pwe3SatopVlanPriority
This object allows specification of the SATop VLAN Priority. Applicable for vlan based encapsulation types.
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.19.1.6.1.17
f3Pwe3SatopRxMplsLabel1
This object allows specification of the expected receive MPLS Label. Applicable for single MPLS label encapsulation type.
columnMplsLabel.1.3.6.1.4.1.2544.1.12.19.1.6.1.18
f3Pwe3SatopRxMplsLabel2
This object allows specification of the expected receive MPLS Label. Applicable for dual MPLS label encapsulation types.
columnMplsLabel.1.3.6.1.4.1.2544.1.12.19.1.6.1.19
f3Pwe3SatopAlias
This object allows SNMP management entities to provide an alias to the PWE3 SAToP entity.
columnOctetString.1.3.6.1.4.1.2544.1.12.19.1.6.1.2
f3Pwe3SatopTxMplsLabel1
This object allows specification of the transmitted MPLS Label, used for multiplexing. Applicable for single MPLS label encapsulation type.
columnMplsLabel.1.3.6.1.4.1.2544.1.12.19.1.6.1.20
f3Pwe3SatopTxMplsLabel2
This object allows specification of the transmitted MPLS Label, used for multiplexing. Applicable for dual MPLS label encapsulation type.
columnMplsLabel.1.3.6.1.4.1.2544.1.12.19.1.6.1.21
f3Pwe3SatopAisStabilizationProfile
This object allows specification of the AIS stabilization Profile object. If no profile is associated, this value should be 0.0.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.19.1.6.1.22
f3Pwe3SatopResyncProfile
This object allows specification of the Resync Profile object. If no profile is associated, this value should be 0.0.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.19.1.6.1.23
f3Pwe3SatopLossProfile
This object allows specification of the Loss Profile object. If no profile is associated, this value should be 0.0.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.19.1.6.1.24
f3Pwe3SatopTransportMode
This object allows specification of the SATop transport mode.
columnPWE3SatopTransportMode.1.3.6.1.4.1.2544.1.12.19.1.6.1.25
f3Pwe3SatopStorageType
The type of storage configured for this entry.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.2544.1.12.19.1.6.1.26
f3Pwe3SatopRowStatus
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each w…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.12.19.1.6.1.27
f3Pwe3SatopAdminState
This object represents the Administrative State of the PWE3 SAToP entity.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.19.1.6.1.3
f3Pwe3SatopOperationalState
This object represents the Operational State of the PWE3 SAToP entity.
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.19.1.6.1.4
f3Pwe3SatopSecondaryState
This object represents the Secondary State of the PWE3 SAToP entity.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.19.1.6.1.5
f3Pwe3SatopDiscoveryType
This object allows ability to statically/dynamically determine the MAC address of the remote IP Address associated with the SAToP. In the case of static discovery type, f3Pwe3Sa…
columnPWE3SatopDiscoveryType.1.3.6.1.4.1.2544.1.12.19.1.6.1.7
f3Pwe3SatopRemoteIpAddress
This object allows ability to specify the remote IP Address. This is used in the PWE payload.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.12.19.1.6.1.8
f3Pwe3SatopRemoteMacAddress
This object allows ability to specify the remote Layer 2 MAC Address. This must be specified in case of f3Pwe3SatopDiscoveryType as static. This is derived dynamically (via ARP)…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2544.1.12.19.1.6.1.9