f3Pwe3SatopRxMplsLabel2
F3-PWE3-MIB ·
.1.3.6.1.4.1.2544.1.12.19.1.6.1.19
Object
column
r/w
MplsLabel
This object allows specification of the expected receive MPLS Label. Applicable for dual MPLS label encapsulation types.
Context
- MIB
- F3-PWE3-MIB
- OID
.1.3.6.1.4.1.2544.1.12.19.1.6.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f3Pwe3SatopEntry
- Table
- f3Pwe3SatopTable
- Siblings
- 26
Syntax
MplsLabel
- Source
- MplsLabel
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3Pwe3SatopIndex Unique index value associated with the SAToP Entity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.19.1.6.1.1 |
| f3Pwe3SatopEncapsulationType This object allows ability to specify the encapsulation
type of the SATop. It can be encapsulated with
VLAN and single MPLS label(vlan-one-mpls-label),
VLAN and two MPLS labels… | column | PWE3SatopEncapsulationType | .1.3.6.1.4.1.2544.1.12.19.1.6.1.10 |
| f3Pwe3SatopRTPEnabled This object enables/disables RTP header for this SATop instance. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.19.1.6.1.11 |
| f3Pwe3SatopRTPUpdateFrequency When f3Pwe3SatopRTPEnabled is true, this object allows
specification of the RTP clock update frequency. | column | PWE3SatopRTPTSUpdateFreqType | .1.3.6.1.4.1.2544.1.12.19.1.6.1.12 |
| f3Pwe3SatopControlWordEnabled This object is used for 3rd party interoperability, since
earlier versions of PWE do not support control-word. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.19.1.6.1.13 |
| f3Pwe3SatopJitterBufferSize This object allows definition of size of the jitter buffer
in microseconds for this SATop instance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.19.1.6.1.14 |
| f3Pwe3SatopPayloadSize This object allows specification of the SATop payload size. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.19.1.6.1.15 |
| f3Pwe3SatopVlanId This object allows specification of the SATop VLAN Id.
Applicable for vlan based encapsulation types. | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.19.1.6.1.16 |
| f3Pwe3SatopVlanPriority This object allows specification of the SATop VLAN Priority.
Applicable for vlan based encapsulation types. | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.19.1.6.1.17 |
| f3Pwe3SatopRxMplsLabel1 This object allows specification of the expected
receive MPLS Label.
Applicable for single MPLS label encapsulation type. | column | MplsLabel | .1.3.6.1.4.1.2544.1.12.19.1.6.1.18 |
| f3Pwe3SatopAlias This object allows SNMP management entities to provide an
alias to the PWE3 SAToP entity. | column | OctetString | .1.3.6.1.4.1.2544.1.12.19.1.6.1.2 |
| f3Pwe3SatopTxMplsLabel1 This object allows specification of the transmitted
MPLS Label, used for multiplexing.
Applicable for single MPLS label encapsulation type. | column | MplsLabel | .1.3.6.1.4.1.2544.1.12.19.1.6.1.20 |
| f3Pwe3SatopTxMplsLabel2 This object allows specification of the transmitted
MPLS Label, used for multiplexing.
Applicable for dual MPLS label encapsulation type. | column | MplsLabel | .1.3.6.1.4.1.2544.1.12.19.1.6.1.21 |
| f3Pwe3SatopAisStabilizationProfile This object allows specification of the AIS stabilization
Profile object. If no profile is associated, this value should be
0.0. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.19.1.6.1.22 |
| f3Pwe3SatopResyncProfile This object allows specification of the Resync
Profile object. If no profile is associated, this value
should be 0.0. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.19.1.6.1.23 |
| f3Pwe3SatopLossProfile This object allows specification of the Loss
Profile object. If no profile is associated, this value
should be 0.0. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.19.1.6.1.24 |
| f3Pwe3SatopTransportMode This object allows specification of the SATop transport mode. | column | PWE3SatopTransportMode | .1.3.6.1.4.1.2544.1.12.19.1.6.1.25 |
| f3Pwe3SatopStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.19.1.6.1.26 |
| f3Pwe3SatopRowStatus The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.19.1.6.1.27 |
| f3Pwe3SatopAdminState This object represents the Administrative State of the PWE3
SAToP entity. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.19.1.6.1.3 |
| f3Pwe3SatopOperationalState This object represents the Operational State of the PWE3
SAToP entity. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.19.1.6.1.4 |
| f3Pwe3SatopSecondaryState This object represents the Secondary State of the PWE3
SAToP entity. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.19.1.6.1.5 |
| f3Pwe3SatopTDMEntity This object allows specification of the T1/E1 entity
associated with the SAToP. This is only used at
SATop creation time. Result of get operation on this object
will result with … | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.19.1.6.1.6 |
| f3Pwe3SatopDiscoveryType This object allows ability to statically/dynamically
determine the MAC address of the remote IP Address
associated with the SAToP. In the case of static discovery
type, f3Pwe3Sa… | column | PWE3SatopDiscoveryType | .1.3.6.1.4.1.2544.1.12.19.1.6.1.7 |
| f3Pwe3SatopRemoteIpAddress This object allows ability to specify the remote IP
Address. This is used in the PWE payload. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.19.1.6.1.8 |
| f3Pwe3SatopRemoteMacAddress This object allows ability to specify the remote Layer 2
MAC Address. This must be specified in case of
f3Pwe3SatopDiscoveryType as static. This is derived
dynamically (via ARP)… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.19.1.6.1.9 |