f3LagMode
F3-LAG-MIB ·
.1.3.6.1.4.1.2544.1.12.14.1.1.1.6
Object
column
r/w
AggMode
Defines the LAG behavior. A LAG with mode active-standby - exhibits 1:1 protection behavior loadsharing - exhibits port aggregation behavior An active-standby LAG supports 0-2 member ports. One member is in Active role while the other is in Standby role. A loadsharing LAG can have multiple (0-x) member ports, where x is as follows. x = 2 for GE112Pro, GE114Pro, GE206V (Network ports only) x = 2 for XG210 Network ports, x = 10 for XG210 Access ports x = 4 for XG116Pro, XG120Pro (10G ports) x = 6 for XG116Pro GE ports x = 10 for XG120Pro GE ports In CM Aggregation Shelf, the loadsharing LAG can have 2-8 member ports.
Context
- MIB
- F3-LAG-MIB
- OID
.1.3.6.1.4.1.2544.1.12.14.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f3LagEntry
- Table
- f3LagTable
- Siblings
- 12
Syntax
AggMode
- Source
- AggMode
- Base type
Enumeration
Values & Constraints
Type Values
1 | active-standby |
2 | loadsharing |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3LagIndex An integer index value used to uniquely identify this Lag.
It should be the Lag Logical index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.14.1.1.1.1 |
| f3LagRowStatus The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.14.1.1.1.10 |
| f3LagIgnorePartnerColMaxDelay This object is used to configure LAG instance to ignore Collector Max Delay
value in the received LACP PDU. Setting this value to TRUE will result in
no hold-off timer to be star… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.14.1.1.1.11 |
| f3LagFrameDistAlgorithm The frame distribution algorithm used by the LAG for transmitting frames
on the individual LAG member ports. For an active-standby LAG, this will
be active-standby. A loadsharing… | column | LagFrameDistributionAlgorithmType | .1.3.6.1.4.1.2544.1.12.14.1.1.1.12 |
| f3LagDiscardWrongConversation This object is used to control and identify whether frames received on a
LAG member port are to be discarded if the service associated with the
frame (ingress membership) does n… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.14.1.1.1.13 |
| f3LagIfIndex This object has the same value as ifIndex for
LAG logical Port. An integer index value used to
uniquely identify this LAG logical Port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2544.1.12.14.1.1.1.2 |
| f3LagName This object allows SNMP management entities to name
the LAG aggregator. | column | OctetString | .1.3.6.1.4.1.2544.1.12.14.1.1.1.3 |
| f3LagProtocols When this object is enabled, the LACP will run as 802.3ad defines;
When this object is disabled, LACP/LAMP protocols will not run and the
LAG member port is fixed to an assigned… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.14.1.1.1.4 |
| f3LagLacpControl Determines whether or not the Link Aggregation Control Protocol is enabled or disabled
for the LAG. When disabled, the LAG shall ignore LACP frames for the purpose of
selecting… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.14.1.1.1.5 |
| f3LagCcmDefectsDetectionEnabled This object allows for a LAG to use CCM defects DefRemoteCCM and DefRDICCM
as an indication of Signal Fail for the LAG member ports.
When enabled, a LAG member will stop carrying… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.14.1.1.1.7 |
| f3LagStatsAction Allows the Manager to clear the LAG level statistics (f3LagStatsTable). | column | CM-COMMON-MIBCmPmBinAction | .1.3.6.1.4.1.2544.1.12.14.1.1.1.8 |
| f3LagStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.14.1.1.1.9 |