f3NetFpQosPolicerRowStatus
F3-FPM-MIB ·
.1.3.6.1.4.1.2544.1.12.43.1.9.1.16
Object
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3NetFpQosPolicerRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3NetFpQosPolicerRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3NetFpQosPolicerRowStatus object may be modified if
the associated instance of this object is equal to active(1).
Context
- MIB
- F3-FPM-MIB
- OID
.1.3.6.1.4.1.2544.1.12.43.1.9.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f3NetFpQosPolicerEntry
- Table
- f3NetFpQosPolicerTable
- Siblings
- 15
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3NetFpQosPolicerIndex The unique integer index value corresponding to a Quality
of Service Policer.
The Policer Index represents the COS level. This
is applicable in case of a Multi COS Flow Point. In… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.43.1.9.1.1 |
| f3NetFpQosPolicerEBS This object represents the Excess Burst Size (EBS)
of a Policer. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.43.1.9.1.10 |
| f3NetFpQosPolicerAlgorithm This object represents Policer algorithm as 'srTCM'
(Single Rate Triple Color Marking) or 'trTCM'
(Two Rate Triple Color Marking). | column | CM-FACILITY-MIBPolicerAlgorithmType | .1.3.6.1.4.1.2544.1.12.43.1.9.1.11 |
| f3NetFpQosPolicerColorMode This object allows specification of Policer Color Mode as
'color-aware' or 'color-blind'. | column | CM-FACILITY-MIBPolicerColorMode | .1.3.6.1.4.1.2544.1.12.43.1.9.1.12 |
| f3NetFpQosPolicerCouplingFlag This object allows specification of Policer Coupling Flag.
When coupling is enabled, tokens that would normally be
added to the C-bucket are passed to the E-bucket only once the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.9.1.13 |
| f3NetFpQosPolicerPolicingEnabled This object allows specification of Policer Policing.
When Policing is disabled, traffic policing is bypassed.
When Policing is enabled, traffic policing is applied. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.9.1.14 |
| f3NetFpQosPolicerStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.43.1.9.1.15 |
| f3NetFpQosPolicerAdminState This object represents the Administrative State of a Policer. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.43.1.9.1.2 |
| f3NetFpQosPolicerOperationalState This object represents the Operational State of a Policer. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.43.1.9.1.3 |
| f3NetFpQosPolicerSecondaryState This object represents the Secondary State of a Policer. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.43.1.9.1.4 |
| f3NetFpQosPolicerCIRLo This object represents the Commited Information Rate (CIR)
(Lower 32 bits) of the Policer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.9.1.5 |
| f3NetFpQosPolicerCIRHi This object represents the Commited Information Rate (CIR)
(Higher 32 bits) of the Policer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.9.1.6 |
| f3NetFpQosPolicerEIRLo This object represents the Excess Information Rate (EIR)
(Lower 32 bits) of a Policer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.9.1.7 |
| f3NetFpQosPolicerEIRHi This object represents the Excess Information Rate (EIR)
(Lower 32 bits) of a Policer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.9.1.8 |
| f3NetFpQosPolicerCBS This object represents the Commited Burst Size (CBS)
of a Policer. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.43.1.9.1.9 |