f3NetFlowPointSTagControl

F3-FPM-MIB · .1.3.6.1.4.1.2544.1.12.43.1.7.1.17
MIB view Table view

Object

column r/w CM-FACILITY-MIBFlowTagControl 
This object allows specification of the tag management 
operation on the S-TAG.  Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push', 
the VLAN Id (f3NetFlowPointSTagVlanId) and priority
(f3NetFlowPointSTagVlanPriority) are pushed onto the frame;
if the type is 'pushvid', only the VLAN Id (12 bits) is pushed,
the Priority is copied from incoming tag's priority;
if the type is 'swaptag', both VLAN Id and Priority (15 bits) 
are swapped with the specified f3NetFlowPointSTagVlanId and 
f3NetFlowPointSTagVlanPriority;
if the type is 'swapvid', only the VLAN Id (12 bits) are 
swapped with the specified f3NetFlowPointSTagVlanId; 
if the type is 'none', no S-TAG management is performed.

Context

MIB
F3-FPM-MIB
OID
.1.3.6.1.4.1.2544.1.12.43.1.7.1.17
Type
column
Access
readwrite
Status
current
Parent
f3NetFlowPointEntry
Table
f3NetFlowPointTable
Siblings
48

Syntax

CM-FACILITY-MIBFlowTagControl
Source
CM-FACILITY-MIBFlowTagControl
Base type
Enumeration

Values & Constraints

Type Values
1none
2push
3swapvid
4pushvid
5pop
6pushisid

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
f3NetFlowPointIndex
The integer index value corresponding to an Flow Point.
columnInteger32.1.3.6.1.4.1.2544.1.12.43.1.7.1.1
f3NetFlowPointIngressVlanMemberList
It allows specification of VLAN members of the Flow Point. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be…
columnOctetString.1.3.6.1.4.1.2544.1.12.43.1.7.1.10
f3NetFlowPointVlanMemberAction
This object allows to add or remove the VLAN members specified by f3NetFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed …
columnCM-FACILITY-MIBFlowVlanActionType.1.3.6.1.4.1.2544.1.12.43.1.7.1.11
f3NetFlowPointVlanMemberActionVlan
This object allows adding/removing VLAN members to a Flow Point. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form …
columnOctetString.1.3.6.1.4.1.2544.1.12.43.1.7.1.12
f3NetFlowPointIngressUntaggedFrameEnabled
This object allows to specify whether or not the Flow Point supports untagged frame.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.13
f3NetFlowPointCTagControl
This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the…
columnCM-FACILITY-MIBFlowTagControl.1.3.6.1.4.1.2544.1.12.43.1.7.1.14
f3NetFlowPointCTagVlanId
This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3NetFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid…
columnCM-COMMON-MIBVlanId.1.3.6.1.4.1.2544.1.12.43.1.7.1.15
f3NetFlowPointCTagVlanPriority
This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3NetFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' co…
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.43.1.7.1.16
f3NetFlowPointSTagVlanId
This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3NetFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid…
columnCM-COMMON-MIBVlanId.1.3.6.1.4.1.2544.1.12.43.1.7.1.18
f3NetFlowPointSTagVlanPriority
This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3NetFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' c…
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.43.1.7.1.19
f3NetFlowPointAlias
This object allows SNMP management entities to provide a circuit identifier with the Flow Point.
columnOctetString.1.3.6.1.4.1.2544.1.12.43.1.7.1.2
f3NetFlowPointEgressOuterTagPrioMapEnabled
This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable w…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.20
f3NetFlowPointEgressInnerTagPrioMapEnabled
This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable wo…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.21
f3NetFlowPointSESFramesLossThresholdRatio
This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpo…
columnInteger32.1.3.6.1.4.1.2544.1.12.43.1.7.1.22
f3NetFlowPointDefaultMemberEnabled
Truth Value means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.23
f3NetFlowPointMcastRateLimitEnabled
Whether multicast packets need be limited per FP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.24
f3NetFlowPointMcastRateLimitSpeedLo
The rate limiting for multicast packets per FP. When f3NetFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.7.1.25
f3NetFlowPointMcastRateLimitSpeedHi
The rate limiting for multicast packets per FP. When f3NetFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represent…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.7.1.26
f3NetFlowPointBcastRateLimitEnabled
Whether broadcast packets need be limited per FP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.27
f3NetFlowPointBcastRateLimitSpeedLo
The rate limiting for broadcast packets per FP. When f3NetFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represent…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.7.1.28
f3NetFlowPointBcastRateLimitSpeedHi
The rate limiting for broadcast packets per FP. When f3NetFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represen…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.7.1.29
f3NetFlowPointAdminState
This object represents the Administrative State of the Flow Point.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.43.1.7.1.3
f3NetFlowPointCombinedRateLimitEnabled
Whether broadcast and multicast packets need be limited per FP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.30
f3NetFlowPointCombinedRateLimitSpeedLo
The rate limiting for broadcast and multicast packets per FP. When f3NetFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame a…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.7.1.31
f3NetFlowPointCombinedRateLimitSpeedHi
The rate limiting for broadcast and multicast packets per FP. When f3NetFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame a…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.7.1.32
f3NetFlowPointSplitHorizonGroupOID
Specifies the Split-Horizon Group OID. If there is no SHG, the value is none.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.43.1.7.1.33
f3NetFlowPointLoopAvoidance
EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.43.1.7.1.34
f3NetFlowPointHierarchicalCOSEnabled
Enable or Disable Hierarchical COS shaping (flow shaping).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.35
f3NetFlowPointMaximumBWLo
This attribute description the Flow Point maximum bandwidth. This object only represents low 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.7.1.36
f3NetFlowPointMaximumBWHi
This attribute description the Flow Point maximum bandwidth. This object only represents high 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.7.1.37
f3NetFlowPointGuaranteedBWLo
This attribute description the Flow Point guaranteed bandwidth. This object only represents low 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.7.1.38
f3NetFlowPointGuaranteedBWHi
This attribute description the Flow Point guaranteed bandwidth. This objects only represents high 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.7.1.39
f3NetFlowPointOperationalState
This object represents the Operational State of the Flow Point.
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.43.1.7.1.4
f3NetFlowPointAutoBandwidthConfigEnabled
This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; t…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.40
f3NetFlowPointAutoCIRPercentage
This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when f3NetFlowPointAutoBandwidthConfigEnabled is TRUE.
columnInteger32.1.3.6.1.4.1.2544.1.12.43.1.7.1.41
f3NetFlowPointFrameFwdEnabled
When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.42
f3NetFlowPointStorageType
The type of storage configured for this entry.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.2544.1.12.43.1.7.1.43
f3NetFlowPointRowStatus
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writ…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.12.43.1.7.1.44
f3NetFlowPointUsePortPrioMapProfile
This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.45
f3NetFlowPointRefPrioMapProfile
This object allows to set priority map profile.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.43.1.7.1.46
f3NetFlowpointRefConnectGuardFlowObject
This object specifies Mac Sec flow object OID.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.43.1.7.1.47
f3NetFlowpointSecureBlockingControl
This object can be used to enable/disable secure block.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.48
f3NetFlowpointSecureState
This object specifies the secure state of this flow.
columnCM-COMMON-MIBFlowSecState.1.3.6.1.4.1.2544.1.12.43.1.7.1.49
f3NetFlowPointSecondaryState
This object represents the Secondary State of the Flow Point.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.43.1.7.1.5
f3NetFlowPointAssociatedFlowId
This object provides the association of an Flow with an Flow Point.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.43.1.7.1.6
f3NetFlowPointIngressMultiCOSEnabled
This object allows specification of ingress multiple COS (Class of Service) Flow Point.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.7.1.7
f3NetFlowPointIngressCOS deprecated
This object allows specification of ingress COS (Class of Service) Flow Point. This attribute has been deprecated and is not supported. The Ingress COS is determine…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.43.1.7.1.8
f3NetFlowPointEgressShapingType
This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.
columnCM-FACILITY-MIBShapingType.1.3.6.1.4.1.2544.1.12.43.1.7.1.9