f3NetFlowPointEgressShapingType
F3-FPM-MIB ·
.1.3.6.1.4.1.2544.1.12.43.1.7.1.9
Object
This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.
Context
- MIB
- F3-FPM-MIB
- OID
.1.3.6.1.4.1.2544.1.12.43.1.7.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f3NetFlowPointEntry
- Table
- f3NetFlowPointTable
- Siblings
- 48
Syntax
CM-FACILITY-MIBShapingType
- Source
- CM-FACILITY-MIBShapingType
- Base type
Enumeration
Values & Constraints
Type Values
1 | port-based |
2 | flow-based |
3 | llq |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3NetFlowPointIndex The integer index value corresponding to an Flow Point. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.1 |
| f3NetFlowPointIngressVlanMemberList It allows specification of VLAN members of the Flow Point.
VLAN members are comma separated, of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be… | column | OctetString | .1.3.6.1.4.1.2544.1.12.43.1.7.1.10 |
| f3NetFlowPointVlanMemberAction This object allows to add or remove the VLAN members specified by
f3NetFlowPointVlanMemberActionVlan object. SNMP manager must first
configure the VLAN member to be added/removed … | column | CM-FACILITY-MIBFlowVlanActionType | .1.3.6.1.4.1.2544.1.12.43.1.7.1.11 |
| f3NetFlowPointVlanMemberActionVlan This object allows adding/removing VLAN members to a Flow Point.
VLAN member is of the form X-Y where X is the VLAN Id and Y is
the VLAN Priority. VLAN members can be of the form … | column | OctetString | .1.3.6.1.4.1.2544.1.12.43.1.7.1.12 |
| f3NetFlowPointIngressUntaggedFrameEnabled This object allows to specify whether or not the Flow Point
supports untagged frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.13 |
| f3NetFlowPointCTagControl This object allows specification of the tag management
operation on the C-TAG. Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
the… | column | CM-FACILITY-MIBFlowTagControl | .1.3.6.1.4.1.2544.1.12.43.1.7.1.14 |
| f3NetFlowPointCTagVlanId This object allows specification of the VLAN Id to
be pushed or swapped, based on the value of
f3NetFlowPointIngressCTagControl. It is applicable
for 'push', 'swaptag', 'swapvid… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.43.1.7.1.15 |
| f3NetFlowPointCTagVlanPriority This object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of f3NetFlowPointIngressCTagControl.
It is applicable for 'push' and 'swaptag' co… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.43.1.7.1.16 |
| f3NetFlowPointSTagControl This object allows specification of the tag management
operation on the S-TAG. Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
th… | column | CM-FACILITY-MIBFlowTagControl | .1.3.6.1.4.1.2544.1.12.43.1.7.1.17 |
| f3NetFlowPointSTagVlanId This object allows specification of the VLAN Id to
be pushed or swapped, based on the value of
f3NetFlowPointIngressSTagControl. It is applicable
for 'push', 'swaptag', 'swapvid… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.43.1.7.1.18 |
| f3NetFlowPointSTagVlanPriority This object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of
f3NetFlowPointIngressSTagControl. It is applicable
for 'push' and 'swaptag' c… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.43.1.7.1.19 |
| f3NetFlowPointAlias This object allows SNMP management entities to provide a
circuit identifier with the Flow Point. | column | OctetString | .1.3.6.1.4.1.2544.1.12.43.1.7.1.2 |
| f3NetFlowPointEgressOuterTagPrioMapEnabled This object defines whether to use the Egress Prio
Mapping to swap the priority of outer tag. When Enabled,
it indicates that the operation specified in the
EgressPrioMapTable w… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.20 |
| f3NetFlowPointEgressInnerTagPrioMapEnabled This object defines whether to use the Egress Prio
Mapping to swap the priority of inner tag. When Enabled,
it indicates that the operation specified in the
EgressPrioMapTable wo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.21 |
| f3NetFlowPointSESFramesLossThresholdRatio This object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the flowpoint.
This functionality is applicable if the flowpo… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.22 |
| f3NetFlowPointDefaultMemberEnabled Truth Value means that on this FP, the membership is all the tag
packets without match any other membership associated to the port.
Untagged means untagged flow. Default only care… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.23 |
| f3NetFlowPointMcastRateLimitEnabled Whether multicast packets need be limited per FP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.24 |
| f3NetFlowPointMcastRateLimitSpeedLo The rate limiting for multicast packets per FP. When
f3NetFlowPointMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped. This objects
only represents… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.25 |
| f3NetFlowPointMcastRateLimitSpeedHi The rate limiting for multicast packets per FP. When
f3NetFlowPointMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped. This objects
only represent… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.26 |
| f3NetFlowPointBcastRateLimitEnabled Whether broadcast packets need be limited per FP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.27 |
| f3NetFlowPointBcastRateLimitSpeedLo The rate limiting for broadcast packets per FP. When
f3NetFlowPointBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped. This objects
only represent… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.28 |
| f3NetFlowPointBcastRateLimitSpeedHi The rate limiting for broadcast packets per FP. When
f3NetFlowPointBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped. This objects
only represen… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.29 |
| f3NetFlowPointAdminState This object represents the Administrative State of the Flow Point. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.43.1.7.1.3 |
| f3NetFlowPointCombinedRateLimitEnabled Whether broadcast and multicast packets need be limited per FP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.30 |
| f3NetFlowPointCombinedRateLimitSpeedLo The rate limiting for broadcast and multicast packets per FP.
When f3NetFlowPointCombinedRateLimitEnabled is true and the value is 0,
it means all broadcast and multicast frame a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.31 |
| f3NetFlowPointCombinedRateLimitSpeedHi The rate limiting for broadcast and multicast packets per FP.
When f3NetFlowPointCombinedRateLimitEnabled is true and the value is 0,
it means all broadcast and multicast frame a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.32 |
| f3NetFlowPointSplitHorizonGroupOID Specifies the Split-Horizon Group OID. If there is no SHG, the value is none. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.43.1.7.1.33 |
| f3NetFlowPointLoopAvoidance EID of this associated Loop Avoidance protocol entity.
A value of NONE indicates there is no loop avoidance protocol.
Currently ERP EID is filled when ELAN service is created. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.43.1.7.1.34 |
| f3NetFlowPointHierarchicalCOSEnabled Enable or Disable Hierarchical COS shaping (flow shaping). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.35 |
| f3NetFlowPointMaximumBWLo This attribute description the Flow Point maximum bandwidth.
This object only represents low 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.36 |
| f3NetFlowPointMaximumBWHi This attribute description the Flow Point maximum bandwidth.
This object only represents high 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.37 |
| f3NetFlowPointGuaranteedBWLo This attribute description the Flow Point guaranteed bandwidth.
This object only represents low 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.38 |
| f3NetFlowPointGuaranteedBWHi This attribute description the Flow Point guaranteed bandwidth.
This objects only represents high 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.39 |
| f3NetFlowPointOperationalState This object represents the Operational State of the Flow Point. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.43.1.7.1.4 |
| f3NetFlowPointAutoBandwidthConfigEnabled This object specifies the shaper bandwidth is automatically adjusted
by the system. For a single COS Flow Point, the shaper EIR bandwidth is
set to the maximum port bandwidth; t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.40 |
| f3NetFlowPointAutoCIRPercentage This object specifies the percentage of available shaper CIR to be assigned
to this Flow Point when f3NetFlowPointAutoBandwidthConfigEnabled is TRUE. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.41 |
| f3NetFlowPointFrameFwdEnabled When enabled Flow Point will forward frames it receives.
When disabled, the Flow Point will not forward frames it receives. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.42 |
| f3NetFlowPointStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.43.1.7.1.43 |
| f3NetFlowPointRowStatus The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.43.1.7.1.44 |
| f3NetFlowPointUsePortPrioMapProfile This indicates whether the flow point is using, if true, the port's
Priority Mapping Profile or, if false, is using its own
Priority Mapping Profile. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.45 |
| f3NetFlowPointRefPrioMapProfile This object allows to set priority map profile. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.43.1.7.1.46 |
| f3NetFlowpointRefConnectGuardFlowObject This object specifies Mac Sec flow object OID. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.43.1.7.1.47 |
| f3NetFlowpointSecureBlockingControl This object can be used to enable/disable secure block. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.48 |
| f3NetFlowpointSecureState This object specifies the secure state of this flow. | column | CM-COMMON-MIBFlowSecState | .1.3.6.1.4.1.2544.1.12.43.1.7.1.49 |
| f3NetFlowPointSecondaryState This object represents the Secondary State of the Flow Point. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.43.1.7.1.5 |
| f3NetFlowPointAssociatedFlowId This object provides the association of an Flow with an Flow Point. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.43.1.7.1.6 |
| f3NetFlowPointIngressMultiCOSEnabled This object allows specification of ingress multiple COS
(Class of Service) Flow Point. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.7.1.7 |
| f3NetFlowPointIngressCOS deprecated This object allows specification of ingress COS
(Class of Service) Flow Point.
This attribute has been deprecated and is not supported. The
Ingress COS is determine… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.43.1.7.1.8 |