f3AccFlowpointSecureBlockingControl
F3-FPM-MIB ·
.1.3.6.1.4.1.2544.1.12.43.1.1.1.48
Object
This object can be used to enable/disable secure block.
Context
- MIB
- F3-FPM-MIB
- OID
.1.3.6.1.4.1.2544.1.12.43.1.1.1.48- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f3AccFlowPointEntry
- Table
- f3AccFlowPointTable
- Siblings
- 48
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3AccFlowPointIndex The integer index value corresponding to an Flow Point. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.1 |
| f3AccFlowPointIngressVlanMemberList It allows specification of VLAN members of the Flow Point.
VLAN members are comma separated, of the form X-Y where X is the
VLAN Id and Y is the VLAN Priority. VLAN members can be… | column | OctetString | .1.3.6.1.4.1.2544.1.12.43.1.1.1.10 |
| f3AccFlowPointVlanMemberAction This object allows to add or remove the VLAN members specified by
f3AccFlowPointVlanMemberActionVlan object. SNMP manager must first
configure the VLAN member to be added/removed … | column | CM-FACILITY-MIBFlowVlanActionType | .1.3.6.1.4.1.2544.1.12.43.1.1.1.11 |
| f3AccFlowPointVlanMemberActionVlan This object allows adding/removing VLAN members to a Flow Point.
VLAN member is of the form X-Y where X is the VLAN Id and Y is
the VLAN Priority. VLAN members can be of the form … | column | OctetString | .1.3.6.1.4.1.2544.1.12.43.1.1.1.12 |
| f3AccFlowPointIngressUntaggedFrameEnabled This object allows to specify whether or not the Flow Point
supports untagged frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.13 |
| f3AccFlowPointCTagControl This object allows specification of the tag management
operation on the C-TAG. Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
the… | column | CM-FACILITY-MIBFlowTagControl | .1.3.6.1.4.1.2544.1.12.43.1.1.1.14 |
| f3AccFlowPointCTagVlanId This object allows specification of the VLAN Id to
be pushed or swapped, based on the value of
f3AccFlowPointIngressCTagControl. It is applicable
for 'push', 'swaptag', 'swapvid… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.43.1.1.1.15 |
| f3AccFlowPointCTagVlanPriority This object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of f3AccFlowPointIngressCTagControl.
It is applicable for 'push' and 'swaptag' co… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.43.1.1.1.16 |
| f3AccFlowPointSTagControl This object allows specification of the tag management
operation on the S-TAG. Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
th… | column | CM-FACILITY-MIBFlowTagControl | .1.3.6.1.4.1.2544.1.12.43.1.1.1.17 |
| f3AccFlowPointSTagVlanId This object allows specification of the VLAN Id to
be pushed or swapped, based on the value of
f3AccFlowPointIngressSTagControl. It is applicable
for 'push', 'swaptag', 'swapvid… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.43.1.1.1.18 |
| f3AccFlowPointSTagVlanPriority This object allows specification of the VLAN Priority to
be pushed or swapped, based on the value of
f3AccFlowPointIngressSTagControl. It is applicable
for 'push' and 'swaptag' c… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.43.1.1.1.19 |
| f3AccFlowPointAlias This object allows SNMP management entities to provide a
circuit identifier with the Flow Point. | column | OctetString | .1.3.6.1.4.1.2544.1.12.43.1.1.1.2 |
| f3AccFlowPointEgressOuterTagPrioMapEnabled This object defines whether to use the Egress Prio
Mapping to swap the priority of outer tag. When Enabled,
it indicates that the operation specified in the
EgressPrioMapTable w… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.20 |
| f3AccFlowPointEgressInnerTagPrioMapEnabled This object defines whether to use the Egress Prio
Mapping to swap the priority of inner tag. When Enabled,
it indicates that the operation specified in the
EgressPrioMapTable wo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.21 |
| f3AccFlowPointSESFramesLossThresholdRatio This object is used to specify the frame-loss ratio
per flow that starts counting Severely Errored Seconds (SES)
on the flowpoint.
This functionality is applicable if the flowpo… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.22 |
| f3AccFlowPointDefaultMemberEnabled Truth Value means that on this FP, the membership is all the tag
packets without match any other membership associated to the port.
Untagged means untagged flow. Default only care… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.23 |
| f3AccFlowPointMcastRateLimitEnabled Whether multicast packets need be limited per FP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.24 |
| f3AccFlowPointMcastRateLimitSpeedLo The rate limiting for multicast packets per FP. When
f3AccFlowPointMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped. This objects
only represents… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.25 |
| f3AccFlowPointMcastRateLimitSpeedHi The rate limiting for multicast packets per FP. When
f3AccFlowPointMcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped. This objects
only represent… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.26 |
| f3AccFlowPointBcastRateLimitEnabled Whether broadcast packets need be limited per FP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.27 |
| f3AccFlowPointBcastRateLimitSpeedLo The rate limiting for broadcast packets per FP. When
f3AccFlowPointBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped. This objects
only represent… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.28 |
| f3AccFlowPointBcastRateLimitSpeedHi The rate limiting for broadcast packets per FP. When
f3AccFlowPointBcastRateLimitEnabled and the value is 0,
it means all multicast frame are dropped. This objects
only represen… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.29 |
| f3AccFlowPointAdminState This object represents the Administrative State of the Flow Point. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.43.1.1.1.3 |
| f3AccFlowPointCombinedRateLimitEnabled Whether broadcast and multicast packets need be limited per FP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.30 |
| f3AccFlowPointCombinedRateLimitSpeedLo The rate limiting for broadcast and multicast packets per FP.
When f3AccFlowPointCombinedRateLimitEnabled is true and the value is 0,
it means all broadcast and multicast frame a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.31 |
| f3AccFlowPointCombinedRateLimitSpeedHi The rate limiting for broadcast and multicast packets per FP.
When f3AccFlowPointCombinedRateLimitEnabled is true and the value is 0,
it means all broadcast and multicast frame a… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.32 |
| f3AccFlowPointSplitHorizonGroupOID Specifies the Split-Horizon Group OID. If there is no SHG, the value is none. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.43.1.1.1.33 |
| f3AccFlowPointLoopAvoidance EID of this associated Loop Avoidance protocol entity.
A value of NONE indicates there is no loop avoidance protocol.
Currently ERP EID is filled when ELAN service is created. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.43.1.1.1.34 |
| f3AccFlowPointHierarchicalCOSEnabled Enable or Disable Hierarchical COS shaping (flow shaping). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.35 |
| f3AccFlowPointMaximumBWLo This attribute description the Flow Point maximum bandwidth.
This object only represents low 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.36 |
| f3AccFlowPointMaximumBWHi This attribute description the Flow Point maximum bandwidth.
This object only represents high 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.37 |
| f3AccFlowPointGuaranteedBWLo This attribute description the Flow Point guaranteed bandwidth.
This object only represents low 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.38 |
| f3AccFlowPointGuaranteedBWHi This attribute description the Flow Point guaranteed bandwidth.
This objects only represents high 32 bits. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.39 |
| f3AccFlowPointOperationalState This object represents the Operational State of the Flow Point. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.43.1.1.1.4 |
| f3AccFlowPointAutoBandwidthConfigEnabled This object specifies the shaper bandwidth is automatically adjusted
by the system. For a single COS Flow Point, the shaper EIR bandwidth is
set to the maximum port bandwidth; t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.40 |
| f3AccFlowPointAutoCIRPercentage This object specifies the percentage of available shaper CIR to be assigned
to this Flow Point when f3AccFlowPointAutoBandwidthConfigEnabled is TRUE. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.41 |
| f3AccFlowPointFrameFwdEnabled When enabled Flow Point will forward frames it receives. When disabled,
the Flow Point will not forward frames it receives. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.42 |
| f3AccFlowPointStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.43.1.1.1.43 |
| f3AccFlowPointRowStatus The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.43.1.1.1.44 |
| f3AccFlowPointUsePortPrioMapProfile This indicates whether the flow point is using, if true, the port's
Priority Mapping Profile or, if false, is using its own
Priority Mapping Profile. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.45 |
| f3AccFlowPointRefPrioMapProfile This object allows to set priority map profile. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.43.1.1.1.46 |
| f3AccFlowpointRefConnectGuardFlowObject This object specifies Mac Sec flow object OID. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.43.1.1.1.47 |
| f3AccFlowpointSecureState This object specifies the secure state of this flow. | column | CM-COMMON-MIBFlowSecState | .1.3.6.1.4.1.2544.1.12.43.1.1.1.49 |
| f3AccFlowPointSecondaryState This object represents the Secondary State of the Flow Point. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.43.1.1.1.5 |
| f3AccFlowPointAssociatedFlowId This object provides the association of an Flow with an Flow Point. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.43.1.1.1.6 |
| f3AccFlowPointIngressMultiCOSEnabled This object allows specification of ingress multiple COS
(Class of Service) Flow Point. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.43.1.1.1.7 |
| f3AccFlowPointIngressCOS deprecated This object allows specification of ingress COS
(Class of Service) Flow Point.
This attribute has been deprecated and is not supported. The
Ingress COS is determi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.43.1.1.1.8 |
| f3AccFlowPointEgressShapingType This object allows specification of Shaping Type for Flow Point.
For 8.1.1 release, only flow-based Shaping Type is supported. | column | CM-FACILITY-MIBShapingType | .1.3.6.1.4.1.2544.1.12.43.1.1.1.9 |