f3AccFlowPointCTagControl

F3-FPM-MIB · .1.3.6.1.4.1.2544.1.12.43.1.1.1.14
MIB view Table view

Object

column r/w CM-FACILITY-MIBFlowTagControl 
This object allows specification of the tag management 
operation on the C-TAG.  Supported types are 'push', 'pushvid',
'swaptag', 'swapvid' and 'none'. If the type is 'push',
the VLAN Id (f3AccFlowPointCTagVlanId) and priority
(f3AccFlowPointCTagVlanPriority) are pushed onto the frame;
if the type is 'pushvid', only the VLAN Id (12 bits) is pushed,
the Priority is copied from incoming tag's priority;
if the type is 'swaptag', both VLAN Id and Priority (15 bits)
are swapped with the specified f3AccFlowPointCTagVlanId and 
f3AccFlowPointCTagVlanPriority;
if the type is 'swapvid', only the VLAN Id (12 bits) are 
swapped with the specified f3AccFlowPointCTagVlanId; 
if the type is 'none', no C-TAG management is performed.

Context

MIB
F3-FPM-MIB
OID
.1.3.6.1.4.1.2544.1.12.43.1.1.1.14
Type
column
Access
readwrite
Status
current
Parent
f3AccFlowPointEntry
Table
f3AccFlowPointTable
Siblings
48

Syntax

CM-FACILITY-MIBFlowTagControl
Source
CM-FACILITY-MIBFlowTagControl
Base type
Enumeration

Values & Constraints

Type Values
1none
2push
3swapvid
4pushvid
5pop
6pushisid

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
f3AccFlowPointIndex
The integer index value corresponding to an Flow Point.
columnInteger32.1.3.6.1.4.1.2544.1.12.43.1.1.1.1
f3AccFlowPointIngressVlanMemberList
It allows specification of VLAN members of the Flow Point. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be…
columnOctetString.1.3.6.1.4.1.2544.1.12.43.1.1.1.10
f3AccFlowPointVlanMemberAction
This object allows to add or remove the VLAN members specified by f3AccFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed …
columnCM-FACILITY-MIBFlowVlanActionType.1.3.6.1.4.1.2544.1.12.43.1.1.1.11
f3AccFlowPointVlanMemberActionVlan
This object allows adding/removing VLAN members to a Flow Point. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form …
columnOctetString.1.3.6.1.4.1.2544.1.12.43.1.1.1.12
f3AccFlowPointIngressUntaggedFrameEnabled
This object allows to specify whether or not the Flow Point supports untagged frame.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.13
f3AccFlowPointCTagVlanId
This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3AccFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid…
columnCM-COMMON-MIBVlanId.1.3.6.1.4.1.2544.1.12.43.1.1.1.15
f3AccFlowPointCTagVlanPriority
This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3AccFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' co…
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.43.1.1.1.16
f3AccFlowPointSTagControl
This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', th…
columnCM-FACILITY-MIBFlowTagControl.1.3.6.1.4.1.2544.1.12.43.1.1.1.17
f3AccFlowPointSTagVlanId
This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3AccFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid…
columnCM-COMMON-MIBVlanId.1.3.6.1.4.1.2544.1.12.43.1.1.1.18
f3AccFlowPointSTagVlanPriority
This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3AccFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' c…
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.43.1.1.1.19
f3AccFlowPointAlias
This object allows SNMP management entities to provide a circuit identifier with the Flow Point.
columnOctetString.1.3.6.1.4.1.2544.1.12.43.1.1.1.2
f3AccFlowPointEgressOuterTagPrioMapEnabled
This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable w…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.20
f3AccFlowPointEgressInnerTagPrioMapEnabled
This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable wo…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.21
f3AccFlowPointSESFramesLossThresholdRatio
This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpo…
columnInteger32.1.3.6.1.4.1.2544.1.12.43.1.1.1.22
f3AccFlowPointDefaultMemberEnabled
Truth Value means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.23
f3AccFlowPointMcastRateLimitEnabled
Whether multicast packets need be limited per FP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.24
f3AccFlowPointMcastRateLimitSpeedLo
The rate limiting for multicast packets per FP. When f3AccFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.1.1.25
f3AccFlowPointMcastRateLimitSpeedHi
The rate limiting for multicast packets per FP. When f3AccFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represent…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.1.1.26
f3AccFlowPointBcastRateLimitEnabled
Whether broadcast packets need be limited per FP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.27
f3AccFlowPointBcastRateLimitSpeedLo
The rate limiting for broadcast packets per FP. When f3AccFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represent…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.1.1.28
f3AccFlowPointBcastRateLimitSpeedHi
The rate limiting for broadcast packets per FP. When f3AccFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represen…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.1.1.29
f3AccFlowPointAdminState
This object represents the Administrative State of the Flow Point.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.43.1.1.1.3
f3AccFlowPointCombinedRateLimitEnabled
Whether broadcast and multicast packets need be limited per FP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.30
f3AccFlowPointCombinedRateLimitSpeedLo
The rate limiting for broadcast and multicast packets per FP. When f3AccFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame a…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.1.1.31
f3AccFlowPointCombinedRateLimitSpeedHi
The rate limiting for broadcast and multicast packets per FP. When f3AccFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame a…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.1.1.32
f3AccFlowPointSplitHorizonGroupOID
Specifies the Split-Horizon Group OID. If there is no SHG, the value is none.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.43.1.1.1.33
f3AccFlowPointLoopAvoidance
EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.43.1.1.1.34
f3AccFlowPointHierarchicalCOSEnabled
Enable or Disable Hierarchical COS shaping (flow shaping).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.35
f3AccFlowPointMaximumBWLo
This attribute description the Flow Point maximum bandwidth. This object only represents low 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.1.1.36
f3AccFlowPointMaximumBWHi
This attribute description the Flow Point maximum bandwidth. This object only represents high 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.1.1.37
f3AccFlowPointGuaranteedBWLo
This attribute description the Flow Point guaranteed bandwidth. This object only represents low 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.1.1.38
f3AccFlowPointGuaranteedBWHi
This attribute description the Flow Point guaranteed bandwidth. This objects only represents high 32 bits.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.43.1.1.1.39
f3AccFlowPointOperationalState
This object represents the Operational State of the Flow Point.
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.43.1.1.1.4
f3AccFlowPointAutoBandwidthConfigEnabled
This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; t…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.40
f3AccFlowPointAutoCIRPercentage
This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when f3AccFlowPointAutoBandwidthConfigEnabled is TRUE.
columnInteger32.1.3.6.1.4.1.2544.1.12.43.1.1.1.41
f3AccFlowPointFrameFwdEnabled
When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.42
f3AccFlowPointStorageType
The type of storage configured for this entry.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.2544.1.12.43.1.1.1.43
f3AccFlowPointRowStatus
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writ…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.12.43.1.1.1.44
f3AccFlowPointUsePortPrioMapProfile
This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.45
f3AccFlowPointRefPrioMapProfile
This object allows to set priority map profile.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.43.1.1.1.46
f3AccFlowpointRefConnectGuardFlowObject
This object specifies Mac Sec flow object OID.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.43.1.1.1.47
f3AccFlowpointSecureBlockingControl
This object can be used to enable/disable secure block.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.48
f3AccFlowpointSecureState
This object specifies the secure state of this flow.
columnCM-COMMON-MIBFlowSecState.1.3.6.1.4.1.2544.1.12.43.1.1.1.49
f3AccFlowPointSecondaryState
This object represents the Secondary State of the Flow Point.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.43.1.1.1.5
f3AccFlowPointAssociatedFlowId
This object provides the association of an Flow with an Flow Point.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.43.1.1.1.6
f3AccFlowPointIngressMultiCOSEnabled
This object allows specification of ingress multiple COS (Class of Service) Flow Point.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.43.1.1.1.7
f3AccFlowPointIngressCOS deprecated
This object allows specification of ingress COS (Class of Service) Flow Point. This attribute has been deprecated and is not supported. The Ingress COS is determi…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.43.1.1.1.8
f3AccFlowPointEgressShapingType
This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.
columnCM-FACILITY-MIBShapingType.1.3.6.1.4.1.2544.1.12.43.1.1.1.9