vcgHoldOffTimer
F3-EOTDM-MIB ·
.1.3.6.1.4.1.2544.1.12.17.1.1.1.10
Object
column
r/w
HoldOffTime
This object specifies hold off time for LCAS protocol. When creating VCG with LCAS enabled, it is the default value, says 0 ms. When creating VCG with LCAS disabled, it is 0 ms.
Context
- MIB
- F3-EOTDM-MIB
- OID
.1.3.6.1.4.1.2544.1.12.17.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vcgEntry
- Table
- vcgTable
- Siblings
- 11
Syntax
HoldOffTime
- Source
- HoldOffTime
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vcgIndex An integer index value used to uniquely identify this vcg within a card. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.17.1.1.1.1 |
| vcgClearWtrTimer This object will trigger an action.
When writing with '1', a 'clear WTR timer' action for all paths in
the VCG is triggered. Writing '0' is no effect.
When reading, it always retu… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.17.1.1.1.11 |
| vcgRowStatus The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.17.1.1.1.12 |
| vcgIfIndex This object has the same value as ifIndex for vcg. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2544.1.12.17.1.1.1.2 |
| vcgAssociatedEthernetPort This object describes the related Ethernet Port of the vcg. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.17.1.1.1.3 |
| vcgAdminState This object represents the Administrative State of the vcg. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.17.1.1.1.4 |
| vcgOperationalState This object represents the Operational State of the vcg. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.17.1.1.1.5 |
| vcgSecondaryState This object represents the Secondary State of the vcg. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.17.1.1.1.6 |
| vcgType Type of paths in this VCG. All paths in this VCG are the same type.
This is a required field when creating a VCG, and can not be
changed on an existing VCG.
See the definition of … | column | VcgType | .1.3.6.1.4.1.2544.1.12.17.1.1.1.7 |
| vcgLcasEnabled This object provides whether Lcas is enabled/disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.17.1.1.1.8 |
| vcgWtrTimer This object specifies wait to restore(WTR) time for LCAS protocol.
When creating VCG with LCAS enabled, it is the default value,
says 5 minutes. When creating VCG with LCAS disabl… | column | WtrTime | .1.3.6.1.4.1.2544.1.12.17.1.1.1.9 |