ewnSensorHumidityValue
EtherWAN-ewnSwitchM ·
.1.3.6.1.4.1.2736.1.1.15.2.13
Object
scalar
SNMPv2-SMIInteger32
The current humidity reading if a humidity sensor is present on this system.
Context
- MIB
- EtherWAN-ewnSwitchM
- OID
.1.3.6.1.4.1.2736.1.1.15.2.13- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- ewnSensorObjects
- Siblings
- 35
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ewnSensorPollEnable A value of true(1) indicates that sensor polling is enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2736.1.1.15.2.1 |
| ewnSensorHumidityMinInterval Specifies the minimum period in seconds between two successive traps.
This applies to e-mail notification too. | scalar | seconds Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.10 |
| ewnSensorTempUnit This variable indicates the present temperature unit. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.11 |
| ewnSensorTempValue The current Celsius temperature reading if a temperature sensor is
present on this system. The value would be interpreted as
(degrees C * 10) or (degrees F * 10) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2736.1.1.15.2.12 |
| ewnSensorDigitalInputIndex The index of a digital input pin. | scalar | Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.14 |
| ewnSensorDigitalInputState This variable reports the most recent measurement seen by the digital input.
A value of high(2) indicates HIGH. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.15 |
| ewnSensorDigitalInputStatus This variable indicates the present operational status of the sensor. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.16 |
| ewnSensorDigitalInput1Description Administratively assigned human-readable name for this digital input pin. | scalar | OctetString | .1.3.6.1.4.1.2736.1.1.15.2.17 |
| ewnSensorDigitalInput1State This variable reports the most recent measurement seen by this digital input.
A value of high(2) indicates HIGH. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.18 |
| ewnSensorDigitalInput1Status This variable indicates the present operational status of this sensor. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.19 |
| ewnSensorPollInterval Specifies how often (in seconds) the switch polls for the change that
triggers an alarm. This applies to all sensors (including Digital
Input). Default value is 60 seconds. | scalar | seconds Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.2 |
| ewnSensorDigitalInput1TrapEnable When the value of this object is lowLevel(1) or highLevel(2),
generation of ewnSensorDigitalInput1Trap is enabled. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.20 |
| ewnSensorDigitalInput1MinInterval Specifies the minimum period in seconds between two successive
traps. This applies to e-mail notification too. | scalar | seconds Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.21 |
| ewnSensorDigitalInput2Description Administratively assigned human-readable name for this digital input pin. | scalar | OctetString | .1.3.6.1.4.1.2736.1.1.15.2.22 |
| ewnSensorDigitalInput2State This variable reports the most recent measurement seen by this digital input.
A value of high(2) indicates HIGH. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.23 |
| ewnSensorDigitalInput2Status This variable indicates the present operational status of this sensor. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.24 |
| ewnSensorDigitalInput2TrapEnable When the value of this object is lowLevel(1) or highLevel(2),
generation of ewnSensorDigitalInput2Trap is enabled. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.25 |
| ewnSensorDigitalInput2MinInterval Specifies the minimum period in seconds between two successive
traps. This applies to e-mail notification too. | scalar | seconds Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.26 |
| ewnSensorDigitalInput3Description Administratively assigned human-readable name for this digital input pin. | scalar | OctetString | .1.3.6.1.4.1.2736.1.1.15.2.27 |
| ewnSensorDigitalInput3State This variable reports the most recent measurement seen by this digital input.
A value of high(2) indicates HIGH. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.28 |
| ewnSensorDigitalInput3Status This variable indicates the present operational status of this sensor. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.29 |
| ewnSensorTempTrapEnable When the value of this object is true(1), generation of ewnSensorTempOverTrap
and ewnSensorTempUnderTrap is enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2736.1.1.15.2.3 |
| ewnSensorDigitalInput3TrapEnable When the value of this object is lowLevel(1) or highLevel(2),
generation of ewnSensorDigitalInput3Trap is enabled. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.30 |
| ewnSensorDigitalInput3MinInterval Specifies the minimum period in seconds between two successive
traps. This applies to e-mail notification too. | scalar | seconds Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.31 |
| ewnSensorDigitalInput4Description Administratively assigned human-readable name for this digital input pin. | scalar | OctetString | .1.3.6.1.4.1.2736.1.1.15.2.32 |
| ewnSensorDigitalInput4State This variable reports the most recent measurement seen by this digital input.
A value of high(2) indicates HIGH. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.33 |
| ewnSensorDigitalInput4Status This variable indicates the present operational status of this sensor. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.34 |
| ewnSensorDigitalInput4TrapEnable When the value of this object is lowLevel(1) or highLevel(2),
generation of ewnSensorDigitalInput3Trap is enabled. | scalar | Enumeration | .1.3.6.1.4.1.2736.1.1.15.2.35 |
| ewnSensorDigitalInput4MinInterval Specifies the minimum period in seconds between two successive
traps. This applies to e-mail notification too. | scalar | seconds Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.36 |
| ewnSensorHumidityTrapEnable When the value of this object is true(1), generation of ewnSensorHumidityOverTrap
and ewnSensorHumidityUnderTrap is enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2736.1.1.15.2.4 |
| ewnSensorTempHighThreshold The upper threshold for this sensor. The value would be interpreted as
(degrees C * 10) or (degrees F * 10). A value of -2730 indicates no threshold is defined. | scalar | Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.5 |
| ewnSensorTempLowhreshold The lower threshold for this sensor. The value would be interpreted as
(degrees C * 10) or (degrees F * 10). A value of -2730 indicates no threshold is defined. | scalar | Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.6 |
| ewnSensorHumidityHighThreshold The upper threshold for this sensor in percentRH. A value of 0 indicates
no threhold is defined. | scalar | Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.7 |
| ewnSensorHumidityLowThreshold The upper threshold for this sensor in percentRH. A value of 0 indicates
no threhold is defined. | scalar | Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.8 |
| ewnSensorTemperatureMinInterval Specifies the minimum period in seconds between two successive traps.
This applies to e-mail notification too. A value of 0 indicates
no trap will be sent on the same event. | scalar | seconds Integer32 | .1.3.6.1.4.1.2736.1.1.15.2.9 |