agentTransferUploadImagename

EdgeSwitch-SWITCHING-MIB · .1.3.6.1.4.1.4413.1.1.1.2.9.1.10

MIB view Table view

Object

scalar r/w Enumeration

Transfer upload image name. Sets the image to be uploaded as the specified
name. Imagename cannot be set to unknown(1) option. When no name is set
this object returns unknown(1) by default.
Note: Imagename, File Name, File Path, and Server IP Address are applicable
only if the Transfer Mode is TFTP, SFTP or SCP.

Context

MIB: EdgeSwitch-SWITCHING-MIB
OID: .1.3.6.1.4.1.4413.1.1.1.2.9.1.10
Type: scalar
Access: readwrite
Status: current
Parent: agentTransferUploadGroup
Siblings: 14

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
agentTransferUploadMode Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is valid only when the file transfer i…	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.1`
agentTransferUploadUsername Username applicable to secure upload types, i.e., SFTP or SCP and FTP.	scalar	OctetString	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.11`
agentTransferUploadPassword Password applicable to secure upload types, i.e. SFTP or SCP and FTP.	scalar	OctetString	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.12`
agentTransferUploadRemoteFilename Transfer upload remote filename configures the file name for the file being created remotely. It can be up to 31 alphanumeric characters. Note: File Name, File Path, and Server IP…	scalar	OctetString	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.14`
agentTransferUploadSourceInterface A source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A non-zero value indica…	scalar	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.15`
agentTransferUploadServicePortSrcInterface To select Service Port as a source-interface.	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.16`
agentTransferUploadServerIP deprecated Transfer upload server IP configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The address is 4 intege…	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.2`
agentTransferUploadPath Transfer upload path configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.	scalar	OctetString	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.3`
agentTransferUploadFilename Transfer upload filename configures the file name for the file being uploaded from the switch. It can be up to 31 alphanumeric characters. The switch remembers the last file name …	scalar	OctetString	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.4`
agentTransferUploadDataType Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - Message log…	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.5`
agentTransferUploadStart Transfer upload start will start an upload transfer. The agentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.6`
agentTransferUploadStatus Indicates the current status of an upload transfer.	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.7`
agentTransferUploadServerAddressType The type of the serverip address, as defined in the InetAddress MIB. The agentTransferUploadServerAddress object is intepreted within the context of agentTransferUpload…	scalar	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.8`
agentTransferUploadServerAddress Transfer upload serverip configures the IP address of the server where the file is to be uploaded to.It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The type of this…	scalar	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.4413.1.1.1.2.9.1.9`