agentSwitchMulticastStormControlAction

EdgeSwitch-SWITCHING-MIB · .1.3.6.1.4.1.4413.1.1.1.2.8.12.14

MIB view Table view

Object

scalar r/w Enumeration

Configures the action to be taken when multicast storm control rate limit is reached.
none(0) - No action is taken.
shutdown(1) - Diag disable the interface on storm control.
trap(2)     - Generate trap on storm control.

Context

MIB: EdgeSwitch-SWITCHING-MIB
OID: .1.3.6.1.4.1.4413.1.1.1.2.8.12.14
Type: scalar
Access: readwrite
Status: current
Parent: agentSwitchStormControlGroup
Siblings: 14

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
agentSwitchDot3FlowControlMode Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports. Enabling symmetric flow cont…	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.1`
agentSwitchBroadcastControlThresholdUnit Configures the units of the threshold value to percentage of port speed or absolute packets per second.	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.10`
agentSwitchMulticastControlThresholdUnit Configures the units of the threshold value to percentage of port speed or absolute packets per second.	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.11`
agentSwitchUnicastControlThresholdUnit Configures the units of the threshold value to percentage of port speed or absolute packets per second.	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.12`
agentSwitchBroadcastStormControlAction Configures the action to be taken when broadcast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on storm control. trap…	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.13`
agentSwitchUnicastStormControlAction Configures the action to be taken when unicast storm control rate limit is reached. none(0) - No action is taken. shutdown(1) - Diag disable the interface on storm control. trap(2…	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.15`
agentSwitchStormControlType Type of storm control. broadcast(1) - Broadcast storm control traffic. multicast(2) - Multicast storm control traffic. unicast(3) - Unicast traffic resulted in destination looku…	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.16`
agentSwitchStormControlAction Action to be taken when storm control rate limit is reached. shutdown(1) - Diag disable the interface on storm control. trap(2) - Generate trap on storm control.	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.17`
agentSwitchBroadcastControlMode The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Et…	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.4`
agentSwitchBroadcastControlThreshold Configures the broadcast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.	scalar	Unsigned32	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.5`
agentSwitchMulticastControlMode The switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for multicast Storm Recovery and the multicast traffic on any Et…	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.6`
agentSwitchMulticastControlThreshold Configures the multicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.	scalar	Unsigned32	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.7`
agentSwitchUnicastControlMode The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on any Et…	scalar	Enumeration	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.8`
agentSwitchUnicastControlThreshold Configures the unicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.	scalar	Unsigned32	`.1.3.6.1.4.1.4413.1.1.1.2.8.12.9`