agentPethPsePortEntry
EdgeSwitch-POWER-ETHERNET-MIB ·
.1.3.6.1.4.1.4413.1.1.15.1.1.1
Object
row
A collection of objects providing additional power information and control parameters for the specified port.
Context
- MIB
- EdgeSwitch-POWER-ETHERNET-MIB
- OID
.1.3.6.1.4.1.4413.1.1.15.1.1.1- Type
- row
- Status
- current
- Parent
- agentPethPsePortTable
- Table
- agentPethPsePortTable
- Children
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentPethPowerLimit The configured maximum power this port can provide to an
attached device measured in Milliwatts. | column | Milliwatts SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4413.1.1.15.1.1.1.1 |
| agentPethPortReset A value of reset(1) is used to move the pse port dot3af state to idle. A
read on this object will always return the value none(0). The value none(0)
can not be forcibly set by the… | column | Enumeration | .1.3.6.1.4.1.4413.1.1.15.1.1.1.10 |
| agentPethPowerLimitMin The minimum power this port can be configured to provide, measured in Milliwatts. | column | Milliwatts SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4413.1.1.15.1.1.1.11 |
| agentPethPowerLimitMax The maximum power this port can be configured to provide, measured in Milliwatts. | column | Milliwatts SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4413.1.1.15.1.1.1.12 |
| agentPethOutputPower The power this port is supplying to an attached device measured
in Milliwatts. | column | Milliwatts SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4413.1.1.15.1.1.1.2 |
| agentPethOutputCurrent The current this port is supplying to an attached device measured
in Milliamps. | column | Milliamps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4413.1.1.15.1.1.1.3 |
| agentPethOutputVolts The voltage this port is supplying to an attached device measured
in Volts. | column | Volts SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4413.1.1.15.1.1.1.4 |
| agentPethTemperature obsolete The temperature measured at this port of the PoE Controller. It is
measured in degree celcius. | column | DEGREES SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4413.1.1.15.1.1.1.5 |
| agentPethPowerLimitType Describes or controls the maximum power that a port can deliver.
A value of dot3af(1) means that the port power limit is as per
the dot3af class of the PD attached.
A value of use… | column | Enumeration | .1.3.6.1.4.1.4413.1.1.15.1.1.1.6 |
| agentPethHighPowerEnable true (1) The PSE port can deliver power up to 32Watts.
false(2) The PSE port can deliver power up to 18Watts | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4413.1.1.15.1.1.1.7 |
| agentPethPowerDetectionType Describes PD detection mechanism performed by the PSE port.
A value of none(0) means no detection is done.
A value of legacy(1) means only legacy capacitive detection scheme is
us… | column | Enumeration | .1.3.6.1.4.1.4413.1.1.15.1.1.1.8 |
| agentPethFaultStatus Describes the error description when the pse port is in fault status.
A value of none(0) specifies that the pse port is not in any error state.
A value of mpsAbsent(1) specifies t… | column | Enumeration | .1.3.6.1.4.1.4413.1.1.15.1.1.1.9 |