extremePethPortViolationPrecedence
EXTREME-POE-MIB ·
.1.3.6.1.4.1.1916.1.27.2.1.1.3
Object
column
r/w
Enumeration
Sets the violation precedence for the specified ports. A value of advertised-class will remove/deny power in the case an 802.3af compliant PD consumes power beyond its advertised class limit. A value of operator-limit will remove/deny power should the PD consume power beyond the configured operator-limit. A value of max-class-operator will remove/deny power if the PD consumes power beyond the maximum of the detected class limit and the operator-limit. A value of none will remove/deny power in case the PD device exceeds the maximum allowable wattage according to regulatory maximum of 20 W. Default is max-class-operator which allows operation of both 802.3af compliant and legacy PDs.
Context
- MIB
- EXTREME-POE-MIB
- OID
.1.3.6.1.4.1.1916.1.27.2.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- extremePethPsePortEntry
- Table
- extremePethPsePortTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | advertisedClass |
2 | operatorLimit |
3 | maxAdvertisedOperator |
4 | none |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| extremePethPortOperatorLimit Controls individual port maximum power level. | column | Milliwatts Integer32 | .1.3.6.1.4.1.1916.1.27.2.1.1.1 |
| extremePethPortFastPoeEnable true (1) Enable Fast PoE
function on this port.
false(2) Disable Fast PoE
function on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.27.2.1.1.10 |
| extremePethPortIfIndex The value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding
to this port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1916.1.27.2.1.1.11 |
| extremePethPortReservedBudget Controls individual port maximum power level. Value is 0 or
in the range of 3000..90000 | column | Milliwatts Integer32 | .1.3.6.1.4.1.1916.1.27.2.1.1.2 |
| extremePethPortClearFault Clears the fault condition. Reading always returns clear(2). | column | Enumeration | .1.3.6.1.4.1.1916.1.27.2.1.1.4 |
| extremePethPortResetPower Resets the power on the port. Reading always returns clear(2) | column | Enumeration | .1.3.6.1.4.1.1916.1.27.2.1.1.5 |
| extremePethPortMeasuredPower The amount of power consumed on the port expressed in Milliwatts. | column | Milliwatts SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1916.1.27.2.1.1.6 |
| extremePethPortDetectionType This object is used to specify the mechanism used
to detect powered ethernet devices attached to a
powered ethernet port. This object should only
be instantiated for ports that
t… | column | Enumeration | .1.3.6.1.4.1.1916.1.27.2.1.1.7 |
| extremePethPortMeasuredVoltage Measured Port Voltage. When the port is not supplying
power, the value will be 0. | column | decivolts SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1916.1.27.2.1.1.8 |
| extremePethPortMeasuredCurrent Measured Port Current. When the port is not supplying
power, the value will be 0. | column | milliamps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1916.1.27.2.1.1.9 |