extremeBfdSessNegotiatedDetectMult
EXTREME-IETF-BFD-MIB ·
.1.3.6.1.4.1.1916.1.43.2.1.2.1.30
Object
column
EXTREME-IETF-BFD-TC-MIBExtremeBfdMultiplierTC
This object specifies the Detect time multiplier.
Context
- MIB
- EXTREME-IETF-BFD-MIB
- OID
.1.3.6.1.4.1.1916.1.43.2.1.2.1.30- Type
- column
- Access
- readonly
- Status
- current
- Parent
- extremeBfdSessEntry
- Table
- extremeBfdSessTable
- Siblings
- 35
Syntax
EXTREME-IETF-BFD-TC-MIBExtremeBfdMultiplierTC
- Source
- EXTREME-IETF-BFD-TC-MIBExtremeBfdMultiplierTC
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 1..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| extremeBfdSessIndex This object contains an index used to represent a
unique BFD session on this device. | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdSessIndexTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.1 |
| extremeBfdSessState BFD session state. | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdSessStateTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.10 |
| extremeBfdSessRemoteHeardFlag This object specifies status of BFD packet reception from
the remote system. Specifically, it is set to true(1) if
the local system is actively receiving BFD packets from the
remo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.43.2.1.2.1.11 |
| extremeBfdSessDiag A diagnostic code specifying the local system's reason
for the last transition of the session from up(4)
to some other state. | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdDiagTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.12 |
| extremeBfdSessOperMode This object specifies current operating mode that BFD
session is operating in. | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdSessOperModeTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.13 |
| extremeBfdSessDemandModeDesiredFlag This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(2) if not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.43.2.1.2.1.14 |
| extremeBfdSessControlPlaneIndepFlag This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system BFD… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.43.2.1.2.1.15 |
| extremeBfdSessMultipointFlag This object indicates the Multipoint (M) bit for this
session. It is set to true(1) if Multipoint (M) bit is
set to 1. Otherwise, the value is set to false(2) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.43.2.1.2.1.16 |
| extremeBfdSessInterface This object contains an interface index used to indicate
the interface which this BFD session is running on. This
value can be zero if there is no interface associated
with this B… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.1916.1.43.2.1.2.1.17 |
| extremeBfdSessSrcAddrType This object specifies IP address type of the source IP
address of this BFD session. Only values unknown(0),
ipv4(1), ipv6(2), or ipv6z(4) have to be supported.
The value of unknow… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.1916.1.43.2.1.2.1.18 |
| extremeBfdSessSrcAddr This object specifies the source IP address of this BFD
session. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.1916.1.43.2.1.2.1.19 |
| extremeBfdSessVersionNumber The version number of the BFD protocol that this session
is running in. Write access is available for this object
to provide ability to set desired version for this
BFD session. | column | Unsigned32 | .1.3.6.1.4.1.1916.1.43.2.1.2.1.2 |
| extremeBfdSessDstAddrType This object specifies IP address type of the neighboring IP
address which is being monitored with this BFD session.
Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4)
have to b… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.1916.1.43.2.1.2.1.20 |
| extremeBfdSessDstAddr This object specifies the neighboring IP address which is
being monitored with this BFD session. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.1916.1.43.2.1.2.1.21 |
| extremeBfdSessGTSM Setting the value of this object to true(1) will enable GTSM
protection of the BFD session. GTSM MUST be enabled on a
singleHop(1) session if no authentication is in use. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.43.2.1.2.1.22 |
| extremeBfdSessGTSMTTL This object is valid only when extremeBfdSessGTSM protection is
enabled on the system. This object specifies the minimum
allowed TTL for received BFD control packets. For
singleHo… | column | Unsigned32 | .1.3.6.1.4.1.1916.1.43.2.1.2.1.23 |
| extremeBfdSessDesiredMinTxInterval This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and s… | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdIntervalTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.24 |
| extremeBfdSessReqMinRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified… | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdIntervalTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.25 |
| extremeBfdSessReqMinEchoRxInterval This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
this is a multih… | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdIntervalTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.26 |
| extremeBfdSessDetectMult This object specifies the Detect time multiplier. | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdMultiplierTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.27 |
| extremeBfdSessNegotiatedInterval This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD Control packets. | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdIntervalTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.28 |
| extremeBfdSessNegotiatedEchoInterval This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD echo packets. Value is expected to be zero if
the sessions is not running… | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdIntervalTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.29 |
| extremeBfdSessType This object specifies the type of this BFD session. | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdSessTypeTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.3 |
| extremeBfdSessAuthPresFlag This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.43.2.1.2.1.31 |
| extremeBfdSessAuthenticationType The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication r… | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdSessAuthenticationTypeTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.32 |
| extremeBfdSessAuthenticationKeyID The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
When extremeBfdSessAuthPresFlag is false(2), then the value
of t… | column | Integer32 | .1.3.6.1.4.1.1916.1.43.2.1.2.1.33 |
| extremeBfdSessAuthenticationKey The authentication key. When the
extremeBfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.
When t… | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdSessionAuthenticationKeyTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.34 |
| extremeBfdSessStorageType This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.1916.1.43.2.1.2.1.35 |
| extremeBfdSessRowStatus This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified excep… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.1916.1.43.2.1.2.1.36 |
| extremeBfdSessDiscriminator This object specifies the local discriminator for this BFD
session, used to uniquely identify it. | column | Unsigned32 | .1.3.6.1.4.1.1916.1.43.2.1.2.1.4 |
| extremeBfdSessRemoteDiscr This object specifies the session discriminator chosen
by the remote system for this BFD session. The value may
be zero(0) if the remote discriminator is not yet known
or if the … | column | Unsigned32 | .1.3.6.1.4.1.1916.1.43.2.1.2.1.5 |
| extremeBfdSessDestinationUdpPort This object specifies the destination UDP port number
used for this BFD session's control packets. The value
may be zero(0) if the session is in adminDown(1) state. | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdCtrlDestPortNumberTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.6 |
| extremeBfdSessSourceUdpPort This object specifies the source UDP port number used
for this BFD session's control packets. The value may be
zero(0) if the session is in adminDown(1) state. Upon
creation of a … | column | EXTREME-IETF-BFD-TC-MIBExtremeBfdCtrlSourcePortNumberTC | .1.3.6.1.4.1.1916.1.43.2.1.2.1.7 |
| extremeBfdSessEchoSourceUdpPort This object specifies the source UDP port number used for
this BFD session's echo packets. The value may be zero(0)
if the session is not running in the echo mode, or the
session … | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.1916.1.43.2.1.2.1.8 |
| extremeBfdSessAdminStatus A transition from 'stop' to 'start' will start
the BFD state machine for the session. The state
machine will have an initial state of down.
A transition from 'start' to 'stop' wil… | column | Enumeration | .1.3.6.1.4.1.1916.1.43.2.1.2.1.9 |