voltageA
ETA-RCI10-MIB ·
.1.3.6.1.4.1.44086.4.1.10.1.10.1.14
Object
column
SNMPv2-SMIInteger32
Power supply voltage in millivolt
Context
- MIB
- ETA-RCI10-MIB
- OID
.1.3.6.1.4.1.44086.4.1.10.1.10.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fusesAEntry
- Table
- fusesATable
- Siblings
- 25
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| indexA Fuse index | column | Integer32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.1 |
| errCrcProgA Program memory CRC fault: 0=no fault, 1=fault | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.10 |
| errIntMemA Internal memory fault: 0=no fault, 1=fault | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.11 |
| errControllerA Controller fault: 0=no fault, 1=fault | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.12 |
| errWatchdogA Watchdog reset fault: 0=no fault, 1=fault | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.13 |
| temperatureA Current temperature of the fuse in millivolt | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.15 |
| loadOutputA Output status of the fuse: 0=output off, 1=output on | column | Integer32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.16 |
| statusShortA Short is detected by this fuse: 0=no fault, 1=fault | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.17 |
| statusOverloadA Overload status: 0=no overload, 1=overload | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.18 |
| statusUvltA Undervoltage status: 0=no undervoltage, 1=undervoltage | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.19 |
| availableA Status of fuse: 0=no fuse, 1=fuse available | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.2 |
| statusOvltA Overvoltage status: 0=no overvoltage, 1=overvoltage | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.20 |
| statusOtmpA Overtemperature status: 0=no overtemperature, 1=overtemperature | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.21 |
| statusNoVccA No VCC status: 0=no VCC, 1=VCC ok | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.22 |
| loadA Current in milliampere which flows throuth the fuse | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.23 |
| labelA Label given for this fuse | column | OctetString | .1.3.6.1.4.1.44086.4.1.10.1.10.1.24 |
| nominalVoltageA Polarity and nominal voltage of the fuse in volt. E.g.: -48 | column | OctetString | .1.3.6.1.4.1.44086.4.1.10.1.10.1.25 |
| multiEsxA MultiEsx: Fuses are connected in parallel to protect higher nominal loads: 0=not connected, 1=connected to a lower slot index, 2=connected as first | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.26 |
| deviceTypeA Type number of the fuse | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.3 |
| serialA Serial number of the fuse | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.4 |
| hwVersionA Hardware version number of the fuse | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.5 |
| swVersionA Software version number of the fuse | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.6 |
| nominalCurrentA Nominal current of the fuse in milliampere | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.7 |
| errNoSysParA No systemparameter available fault: 0=no fault, 1=fault | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.8 |
| errCrcParamA Parameter CRC fault: 0=no fault, 1=fault | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.44086.4.1.10.1.10.1.9 |