portSpeedDpxCfg

ES4552BH2-MIB · .1.3.6.1.4.1.259.6.10.120.1.2.1.1.4
MIB view Table view

Object

column r/w Enumeration 
Configures the speed and duplex mode for a port or trunk,
according to:
    halfDuplex10(2)    - 10Mbps and half duplex mode
    fullDuplex10(3)    - 10Mbps and full duplex mode
    halfDuplex100(4)   - 100Mbps and half duplex mode
    fullDuplex100(5)   - 100Mbps and full duplex mode
    halfDuplex1000(6)  - 1000Mbps and half duplex mode
    fullDuplex1000(7)  - 1000Mbps and full duplex mode
    halfDuplex10g(8)   - 10g and half duplex mode
    fullDuplex10g(9)   - 10g and full duplex mode
    halfDuplex40g(10)  - 40g and half duplex mode
    fullDuplex40g(11)  - 40g and full duplex mode
              
   hundredBaseTX  port can be set as:
       halfDuplex10(2)
       fullDuplex10(3)
       halfDuplex100(4)
       fullDuplex100(5)
   hundredBaseFX  port can be set as:
       fullDuplex100(5)
   thousandBaseSX port can be set as:
       fullDuplex1000(7)
   thousandBaseLX port can be set as:
       fullDuplex1000(7)
   thousandBaseT port can be set as:
       halfDuplex10(2)
       fullDuplex10(3)
       halfDuplex100(4)
       fullDuplex100(5)
   thousandBaseGBIC port can be set as:
       fullDuplex1000(7)
   thousandBaseSfp port can be set as:
       fullDuplex1000(7)
   hundredBaseFxScSingleMode port can be set as:
       fullDuplex100(5)
   hundredBaseFxScMultiMode port can be set as:
       fullDuplex100(5)
   thousandBaseCX port can be set as:
       fullDuplex1000(7)
   tenG port can be set as:
       halfDuplex10g(8)
       fullDuplex10g(9)
   fortyG port can be set as:
       halfDuplex40g(10)
       fullDuplex40g(11)
              
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus.

Context

MIB
ES4552BH2-MIB
OID
.1.3.6.1.4.1.259.6.10.120.1.2.1.1.4
Type
column
Access
readwrite
Status
current
Parent
portEntry
Table
portTable
Siblings
15

Syntax

Enumeration

Values & Constraints

Enumerated Values
1reserved
2halfDuplex10
3fullDuplex10
4halfDuplex100
5fullDuplex100
6halfDuplex1000
7fullDuplex1000
8halfDuplex10g
9fullDuplex10g
10halfDuplex40g
11fullDuplex40g

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
portIndex
The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by th…
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.259.6.10.120.1.2.1.1.1
portTrunkIndex
The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trun…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.259.6.10.120.1.2.1.1.10
portComboForcedMode
This determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effect. For a combo port,…
columnEnumeration.1.3.6.1.4.1.259.6.10.120.1.2.1.1.12
portMtu
Maximum frame size of port. If the size of the incoming packet is larger than this value, the packet will be discarded.
columnUnsigned32.1.3.6.1.4.1.259.6.10.120.1.2.1.1.16
portMacAddrLearningStatus
Set this variable to enabled(1) to start to learn MAC addresses. Set this variable to disabled(2) to stop to learn MAC addresses.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.6.10.120.1.2.1.1.17
portMacAddrLearningCount
The current number of learned MAC addresses.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.259.6.10.120.1.2.1.1.18
portUpTime
The port up time (in hundredths of a second).
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.259.6.10.120.1.2.1.1.19
portName
The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later).
columnOctetString.1.3.6.1.4.1.259.6.10.120.1.2.1.1.2
portShutdownReason
The reason of port shutdown. The value is 0 if no shutdown action is applied to this port.
columnBits.1.3.6.1.4.1.259.6.10.120.1.2.1.1.20
portType
Indicates the port type of the configuration of the switch.
columnEnumeration.1.3.6.1.4.1.259.6.10.120.1.2.1.1.3
portFlowCtrlCfg
(1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port …
columnEnumeration.1.3.6.1.4.1.259.6.10.120.1.2.1.1.5
portCapabilities
Port or trunk capabilities.
columnBits.1.3.6.1.4.1.259.6.10.120.1.2.1.1.6
portAutonegotiation
Whether auto-negotiation is enabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.6.10.120.1.2.1.1.7
portSpeedDpxStatus
The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been i…
columnEnumeration.1.3.6.1.4.1.259.6.10.120.1.2.1.1.8
portFlowCtrlStatus
(2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the mem…
columnEnumeration.1.3.6.1.4.1.259.6.10.120.1.2.1.1.9