mvrForwardingPriority
ES3528MO-MIB ·
.1.3.6.1.4.1.259.6.10.94.1.44.18
Object
scalar
r/w
Integer32
Configure MVR multicast stream forwarding priority. If value is 65535, it means the priority is disabled
Context
- MIB
- ES3528MO-MIB
- OID
.1.3.6.1.4.1.259.6.10.94.1.44.18- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- mvrMgt
- Siblings
- 16
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-6
range: 65535-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mvrStatus Parameter to enable or disable MVR(Multicast VLAN
Registration) on the device. NOTE: IGMP Snooping
must be enabled first before enabling MVR and MVR
will be disabled when IGMP Sno… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.6.10.94.1.44.1 |
| mvrRunningStatus Describes the running status of MVR (Multicast VLAN Registration)
to the switch. A value of true(1) indicates that all necessary
conditions in the MVR environment are satisfied. A… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.259.6.10.94.1.44.10 |
| mvrReceiverVlanId To set receiver VLAN for MVR.The VLAN identified by a particular
value of this index is the same VLAN as identified by the
same value of dot1qVlanIndex in the Q-BRIDGE-MIB. To dis… | scalar | Integer32 | .1.3.6.1.4.1.259.6.10.94.1.44.12 |
| mvrMaxReceiverGroups The maximum number of MVR receiver groups. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.6.10.94.1.44.13 |
| mvrCurrentReceiverGroups The current number of MVR receiver groups. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.6.10.94.1.44.14 |
| mvrReceiverGroupTable The table for configuring the MVR receiver group. | table | - | .1.3.6.1.4.1.259.6.10.94.1.44.15 |
| mvrReceiverGroupStaticTable The table for configuring static members of the
MVR receiver group. | table | - | .1.3.6.1.4.1.259.6.10.94.1.44.16 |
| mvrReceiverGroupCurrentTable The table for the current members of a MVR receiver group. | table | - | .1.3.6.1.4.1.259.6.10.94.1.44.17 |
| mvrVlanId To set VLAN for MVR.The VLAN identified by a particular
value of this index is the same VLAN as identified by the
same value of dot1qVlanIndex in the Q-BRIDGE-MIB. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.6.10.94.1.44.2 |
| mvrGroupCtlTable Configure MVR group range | table | - | .1.3.6.1.4.1.259.6.10.94.1.44.26 |
| mvrRecieverGroupCtlTable Configure MVR receiver group | table | - | .1.3.6.1.4.1.259.6.10.94.1.44.29 |
| mvrMaxGroups The maximum allow number of MVR groups to be forwarded according to subscriber port.
If mvrCurrentGroups over mvrMaxGroups, the multicast stream will be flood to all receiver port. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.6.10.94.1.44.3 |
| mvrCurrentGroups The current learned number of MVR groups. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.6.10.94.1.44.4 |
| mvrGroupStaticTable The table for configuring the static members of the
MVR group. | table | - | .1.3.6.1.4.1.259.6.10.94.1.44.7 |
| mvrGroupCurrentTable The table for the current members of the MVR group. | table | - | .1.3.6.1.4.1.259.6.10.94.1.44.8 |
| mvrPortTable The table for configuring the MVR port. | table | - | .1.3.6.1.4.1.259.6.10.94.1.44.9 |