portComboForcedMode

Object

column r/w Enumeration

This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal to none(1), and setting this variable to none(1) is
not allowed. copperForced(2) is set if user want to force
this combo port running in copper mode. copperPreferredAuto(3)
is obsoleted, and user shall not set this state. sfpForced(4)
is set if user want to force this combo port running in fiber
mode. sfpPreferredAuto(5) is set if user want to change copper or
fiber mode automatically by SFP transceiver present state. If SFP
transceiver is present, this combo port will run in fiber mode, and
if SFP transceiver is not present, this combo port will run in
copper mode.

Context

MIB: ES3510MA-MIB
OID: .1.3.6.1.4.1.259.8.1.11.1.2.1.1.12
Type: column
Access: readwrite
Status: current
Parent: portEntry
Table: portTable
Siblings: 15

Related Objects

Sibling Objects

Object	Type	Syntax	OID
portIndex The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by th…	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.1`
portTrunkIndex The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trun…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.10`
portMasterSlaveModeCfg Configures the PHY mode when auto negotiation is disabled and speed-duplex is 1000full for giga copper port.	column	Enumeration	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.15`
portMacAddrLearningStatus Set this variable to enabled(1) to start to learn MAC addresses. Set this variable to disabled(2) to stop to learn MAC addresses.	column	P-BRIDGE-MIBEnabledStatus	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.17`
portMacAddrLearningCount The current number of learned MAC addresses.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.18`
portUpTime The port up time (in hundredths of a second).	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.19`
portName The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later).	column	OctetString	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.2`
portShutdownReason The reason of port shutdown. The value is 0 if no shutdown action is applied to this port.	column	Bits	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.20`
portType Indicates the port type of the configuration of the switch.	column	Enumeration	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.3`
portSpeedDpxCfg Configures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode …	column	Enumeration	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.4`
portFlowCtrlCfg (1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port …	column	Enumeration	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.5`
portCapabilities Port or trunk capabilities.	column	Bits	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.6`
portAutonegotiation Whether auto-negotiation is enabled.	column	P-BRIDGE-MIBEnabledStatus	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.7`
portSpeedDpxStatus The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been i…	column	Enumeration	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.8`
portFlowCtrlStatus (2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the mem…	column	Enumeration	`.1.3.6.1.4.1.259.8.1.11.1.2.1.1.9`

`1`	none
`2`	copperForced
`3`	copperPreferredAuto
`4`	sfpForced
`5`	sfpPreferredAuto

Object

Context

Syntax

Values & Constraints

Related Objects