mldSnoopUnknownMcastMode

ES3510MA-MIB · .1.3.6.1.4.1.259.8.1.11.1.54.8
MIB view Table view

Object

scalar r/w Enumeration 
Sets the mldSnoopUnknownMcastMode to define the flooding
behavior when receive the unknown multicast traffic.

Context

MIB
ES3510MA-MIB
OID
.1.3.6.1.4.1.259.8.1.11.1.54.8
Type
scalar
Access
readwrite
Status
current
Parent
mldSnoopMgt
Siblings
23

Syntax

Enumeration

Values & Constraints

Enumerated Values
1flood
2toRouterPort

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mldSnoopStatus
Parameter to enable or disable MLD snooping on the device. When enabled, the device will examine MLD packets and set up filters for MLD ports.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.8.1.11.1.54.1
mldSnoopRouterStaticTable
Table for static router ports.
table-.1.3.6.1.4.1.259.8.1.11.1.54.10
mldSnoopMulticastCurrentTable
Table for current multicast addresses.
table-.1.3.6.1.4.1.259.8.1.11.1.54.11
mldSnoopMulticastStaticTable
Table for static multicast addresses.
table-.1.3.6.1.4.1.259.8.1.11.1.54.12
mldSnoopCurrentVlanTable
Table for configuring MLD snooping for each VLAN which exists in the device by (local or network) management, or dynamically created as a result of GVRP requests received.
table-.1.3.6.1.4.1.259.8.1.11.1.54.13
mldSnoopProxyReporting
Parameter to enable or disable MLD snooping proxy reporting on the device.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.8.1.11.1.54.14
mldSnoopUnsolicitedReportInterval
Setting this value to specify how long (in seconds) the uplink ports should transmit unsolicited reports.
scalarUnsigned32.1.3.6.1.4.1.259.8.1.11.1.54.15
mldSnoopPortTable
Table of MLD Snooping service per port.
table-.1.3.6.1.4.1.259.8.1.11.1.54.16
mldSnoopFilterStatus
Parameter to enable or disable MLD filtering on the device.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.8.1.11.1.54.17
mldSnoopProfileTable
The table for configuring the MLD snooping profile.
table-.1.3.6.1.4.1.259.8.1.11.1.54.18
mldSnoopProfileCtlnode-.1.3.6.1.4.1.259.8.1.11.1.54.19
mldSnoopQuerier
Enables (disables) whether the switch acts as an MLD querier.
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.259.8.1.11.1.54.2
mldSnoopProfileRangeTable
The table for configuring the range of the MLD snooping profile.
table-.1.3.6.1.4.1.259.8.1.11.1.54.20
mldSnoopFilterPortTable
Table for port configuration in MLD filtering.
table-.1.3.6.1.4.1.259.8.1.11.1.54.21
mldSnoopThrottlePortTable
Table for port configuration in MLD throttling.
table-.1.3.6.1.4.1.259.8.1.11.1.54.22
mldSnoopClearDynamicGroups
The current number of MLD groups that the interface has joined.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.259.8.1.11.1.54.23
mldSnoopVlanTable
Table of MLD Snooping service per port.
table-.1.3.6.1.4.1.259.8.1.11.1.54.24
mldSnoopRobustness
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. MLD is robust to (Ro…
scalarInteger32.1.3.6.1.4.1.259.8.1.11.1.54.3
mldSnoopQueryInterval
The interval (in seconds) between MLD host-query messages sent by the switch.
scalarInteger32.1.3.6.1.4.1.259.8.1.11.1.54.4
mldSnoopQueryMaxResponseTime
The time after a query, during which a response is expected from an endstation. If a querier has sent a number of queries defined by mldSnoopRobustness, but an endstation has not …
scalarInteger32.1.3.6.1.4.1.259.8.1.11.1.54.5
mldSnoopRouterPortExpireTime
Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous querier) expires.
scalarInteger32.1.3.6.1.4.1.259.8.1.11.1.54.6
mldSnoopVersion
MLD version snooped
scalarInteger32.1.3.6.1.4.1.259.8.1.11.1.54.7
mldSnoopRouterCurrentTable
Table for current router ports.
table-.1.3.6.1.4.1.259.8.1.11.1.54.9