eqlDcbxRemETSRecoTrafficClassGroupBandwidthTable
EQL-DCB-MIB ·
.1.3.6.1.4.1.12740.19.1.2.1.16
Object
column
OctetString
Each octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
bandwidth in percent that the remote station is recommending
to be allocated to the traffic class group. Valid values are
between 0 and 100 inclusive. The total of all eight octets must
equal 100.
Note that an octet string is used instead of a table to enable
atomic programming of these values which is required to fulfill
the requirement that they always total to 100.
Context
- MIB
- EQL-DCB-MIB
- OID
.1.3.6.1.4.1.12740.19.1.2.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- eqlDcbDynamicIfEntry
- Table
- eqlDcbDynamicIfTable
- Siblings
- 124
Syntax
OctetString
Values & Constraints
Object Constraints
range: 8-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlDcbPfcRequestsSent A count of the invoked PFC M_CONTROL.request primitives. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.12740.19.1.2.1.1 |
| eqlDcbxLocPFCCap Indicates the number of traffic classes on the local device
that may simultaneously have PFC enabled. Zero indicates no
limitation, i.e. all available traffic classes may have PF… | column | EqlDcbxSupportedCapacity | .1.3.6.1.4.1.12740.19.1.2.1.10 |
| eqlDcbxLocETSConTsaTc7 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.100 |
| eqlDcbxLocETSRecoTsaTc0 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.101 |
| eqlDcbxLocETSRecoTsaTc1 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.102 |
| eqlDcbxLocETSRecoTsaTc2 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.103 |
| eqlDcbxLocETSRecoTsaTc3 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.104 |
| eqlDcbxLocETSRecoTsaTc4 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.105 |
| eqlDcbxLocETSRecoTsaTc5 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.106 |
| eqlDcbxLocETSRecoTsaTc6 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.107 |
| eqlDcbxLocETSRecoTsaTc7 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.108 |
| eqlDcbxRemETSConTsaTc0 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.109 |
| eqlDcbxLocAppPriorityWilling Indicates if the local system is willing to accept
the Application Priority configuration of the remote system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.11 |
| eqlDcbxRemETSConTsaTc1 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.110 |
| eqlDcbxRemETSConTsaTc2 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.111 |
| eqlDcbxRemETSConTsaTc3 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.112 |
| eqlDcbxRemETSConTsaTc4 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.113 |
| eqlDcbxRemETSConTsaTc5 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.114 |
| eqlDcbxRemETSConTsaTc6 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.115 |
| eqlDcbxRemETSConTsaTc7 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.116 |
| eqlDcbxRemETSRecoTsaTc0 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.117 |
| eqlDcbxRemETSRecoTsaTc1 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.118 |
| eqlDcbxRemETSRecoTsaTc2 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.119 |
| eqlDcbxRemTCSupported deprecated This field is deprecated. | column | EqlDcbxSupportedCapacity | .1.3.6.1.4.1.12740.19.1.2.1.12 |
| eqlDcbxRemETSRecoTsaTc3 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.120 |
| eqlDcbxRemETSRecoTsaTc4 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.121 |
| eqlDcbxRemETSRecoTsaTc5 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.122 |
| eqlDcbxRemETSRecoTsaTc6 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.123 |
| eqlDcbxRemETSRecoTsaTc7 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.124 |
| eqlDcbxLocDCBMode Current operating mode of DCB. | column | EqlDcbxMode | .1.3.6.1.4.1.12740.19.1.2.1.125 |
| eqlDcbxRemETSConMaxTCG Indicates the number of Traffic Class Groups supported on the
remote system. A value of 0 indicates that 8 Traffic Class Groups
are supported. | column | EqlDcbxSupportedCapacity | .1.3.6.1.4.1.12740.19.1.2.1.13 |
| eqlDcbxRemETSConWilling Indicates if the remote system is willing to accept the
ETS configuration recommended by the remote system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.14 |
| eqlDcbxRemETSConTrafficClassGroupBandwidthTable Each octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
… | column | OctetString | .1.3.6.1.4.1.12740.19.1.2.1.15 |
| eqlDcbxRemPFCWilling Indicates if the remote system is willing to accept the
PFC configuration of the local system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.17 |
| eqlDcbxRemPFCMBC Indicates if the remote system is capable of bypassing
MACSEC processing when MACSEC is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.18 |
| eqlDcbxRemPFCCap Indicates the number of traffic classes on the remote device
that may simultaneously have PFC enabled. Zero indicates no
limitation, i.e. all available traffic classes may have P… | column | EqlDcbxSupportedCapacity | .1.3.6.1.4.1.12740.19.1.2.1.19 |
| eqlDcbPfcIndicationsReceived A count of the received PFC M_CONTROL.indication primitives. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.12740.19.1.2.1.2 |
| eqlDcbxRemAppPriorityWilling Indicates if the remote system is willing to accept
the Application Priority configuration of the local system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.20 |
| eqlDcbxLocETSConTrafficClassGroupPri0 Indicates the traffic class group to which priority 0 is
assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.2.1.21 |
| eqlDcbxLocETSConTrafficClassGroupPri1 Indicates the traffic class group to which priority 1 is
assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.2.1.22 |
| eqlDcbxLocETSConTrafficClassGroupPri2 Indicates the traffic class group to which priority 2 is
assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.2.1.23 |
| eqlDcbxLocETSConTrafficClassGroupPri3 Indicates the traffic class group to which priority 3 is
assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.2.1.24 |
| eqlDcbxLocETSConTrafficClassGroupPri4 Indicates the traffic class group to which priority 4 is
assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.2.1.25 |
| eqlDcbxLocETSConTrafficClassGroupPri5 Indicates the traffic class group to which priority 5 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.2.1.26 |
| eqlDcbxLocETSConTrafficClassGroupPri6 Indicates the traffic class group to which priority 6 is
assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.2.1.27 |
| eqlDcbxLocETSConTrafficClassGroupPri7 Indicates the traffic class group to which priority 7 is
assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.2.1.28 |
| eqlDcbxLocPFCEnableEnabledPri0 Indicates if PFC is enabled on priority 0 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.29 |
| eqlDcbxLocTCSupported deprecated This field is deprecated. | column | EqlDcbxSupportedCapacity | .1.3.6.1.4.1.12740.19.1.2.1.3 |
| eqlDcbxLocPFCEnableEnabledPri1 Indicates if PFC is enabled on priority 1 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.30 |
| eqlDcbxLocPFCEnableEnabledPri2 Indicates if PFC is enabled on priority 2 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.31 |
| eqlDcbxLocPFCEnableEnabledPri3 Indicates if PFC is enabled on priority 3 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.32 |
| eqlDcbxLocPFCEnableEnabledPri4 Indicates if PFC is enabled on priority 4 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.33 |
| eqlDcbxLocPFCEnableEnabledPri5 Indicates if PFC is enabled on priority 5 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.34 |
| eqlDcbxLocPFCEnableEnabledPri6 Indicates if PFC is enabled on priority 6 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.35 |
| eqlDcbxLocPFCEnableEnabledPri7 Indicates if PFC is enabled on priority 7 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.36 |
| eqlDcbxLocVLANId VLAN ID to use for DCB. | column | EqlVlanIdentifier | .1.3.6.1.4.1.12740.19.1.2.1.37 |
| eqlDcbxLocVLANState State of VLAN tagging. | column | EqlDcbxVlanState | .1.3.6.1.4.1.12740.19.1.2.1.38 |
| eqlDcbxLocDCBState Current state of DCB. | column | EqlDcbxState | .1.3.6.1.4.1.12740.19.1.2.1.39 |
| eqlDcbxLocETSConMaxTCG Indicates the number of Traffic Class Groups supported on the
local system. A value of 0 indicates that 8 Traffic Class Groups
are supported. | column | EqlDcbxSupportedCapacity | .1.3.6.1.4.1.12740.19.1.2.1.4 |
| eqlDcbxLocPFCState Current state of DCB feature PFC. | column | EqlDcbxState | .1.3.6.1.4.1.12740.19.1.2.1.40 |
| eqlDcbxLocETSState Current state of DCB feature ETS. | column | EqlDcbxState | .1.3.6.1.4.1.12740.19.1.2.1.41 |
| eqlDcbxLocQCNState Current state of DCB feature QCN. | column | EqlDcbxState | .1.3.6.1.4.1.12740.19.1.2.1.42 |
| eqlDcbxLociSCSIPriority Current iSCSI priority. | column | EqlIEEE8021PriorityValue | .1.3.6.1.4.1.12740.19.1.2.1.43 |
| eqlDcbxLocFCoEPriority Current state of DCB feature QCN. | column | EqlIEEE8021PriorityValue | .1.3.6.1.4.1.12740.19.1.2.1.44 |
| eqlDcbxLocBytesRxPri0 Count of bytes recevied on priority 0. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.45 |
| eqlDcbxLocBytesRxPri1 Count of bytes recevied on priority 1. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.46 |
| eqlDcbxLocBytesRxPri2 Count of bytes recevied on priority 2. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.47 |
| eqlDcbxLocBytesRxPri3 Count of bytes recevied on priority 3. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.48 |
| eqlDcbxLocBytesRxPri4 Count of bytes recevied on priority 4. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.49 |
| eqlDcbxLocETSConWilling Indicates if the local system is willing to accept the
ETS configuration recommended by the remote system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.5 |
| eqlDcbxLocBytesRxPri5 Count of bytes recevied on priority 5. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.50 |
| eqlDcbxLocBytesRxPri6 Count of bytes recevied on priority 6. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.51 |
| eqlDcbxLocBytesRxPri7 Count of bytes recevied on priority 7. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.52 |
| eqlDcbxLocBytesTxPri0 Count of bytes transmitted on priority 0. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.53 |
| eqlDcbxLocBytesTxPri1 Count of bytes transmitted on priority 1. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.54 |
| eqlDcbxLocBytesTxPri2 Count of bytes transmitted on priority 2. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.55 |
| eqlDcbxLocBytesTxPri3 Count of bytes transmitted on priority 3. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.56 |
| eqlDcbxLocBytesTxPri4 Count of bytes transmitted on priority 4. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.57 |
| eqlDcbxLocBytesTxPri5 Count of bytes transmitted on priority 5. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.58 |
| eqlDcbxLocBytesTxPri6 Count of bytes transmitted on priority 6. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.59 |
| eqlDcbxLocETSConTrafficClassGroupBandwidthTable Each octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
… | column | OctetString | .1.3.6.1.4.1.12740.19.1.2.1.6 |
| eqlDcbxLocBytesTxPri7 Count of bytes transmitted on priority 7. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.60 |
| eqlDcbCnRpPortPriCreatedRpsPri0 This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notifica… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.61 |
| eqlDcbCnRpPortPriCreatedRpsPri1 This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notifica… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.62 |
| eqlDcbCnRpPortPriCreatedRpsPri2 This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notifica… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.63 |
| eqlDcbCnRpPortPriCreatedRpsPri3 This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notifica… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.64 |
| eqlDcbCnRpPortPriCreatedRpsPri4 This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notifica… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.65 |
| eqlDcbCnRpPortPriCreatedRpsPri5 This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notifica… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.66 |
| eqlDcbCnRpPortPriCreatedRpsPri6 This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notifica… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.67 |
| eqlDcbCnRpPortPriCreatedRpsPri7 This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notifica… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.68 |
| eqlDcbCnRpPortPriCentisecondsPri0 This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
onc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.69 |
| eqlDcbxLocETSRecoTrafficClassGroupBandwidthTable Each octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
… | column | OctetString | .1.3.6.1.4.1.12740.19.1.2.1.7 |
| eqlDcbCnRpPortPriCentisecondsPri1 This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
onc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.70 |
| eqlDcbCnRpPortPriCentisecondsPri2 This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
onc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.71 |
| eqlDcbCnRpPortPriCentisecondsPri3 This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
onc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.72 |
| eqlDcbCnRpPortPriCentisecondsPri4 This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
onc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.73 |
| eqlDcbCnRpPortPriCentisecondsPri5 This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
onc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.74 |
| eqlDcbCnRpPortPriCentisecondsPri6 This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
onc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.75 |
| eqlDcbCnRpPortPriCentisecondsPri7 This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
onc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.76 |
| eqlDcbxLocPfcPausePri0 Number of time PFC pause frames received for priority 0. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.77 |
| eqlDcbxLocPfcPausePri1 Number of time PFC pause frames received for priority 1. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.78 |
| eqlDcbxLocPfcPausePri2 Number of time PFC pause frames received for priority 2. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.79 |
| eqlDcbxLocPFCWilling Indicates if the local system is willing to accept the
PFC configuration of the remote system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.8 |
| eqlDcbxLocPfcPausePri3 Number of time PFC pause frames received for priority 3. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.80 |
| eqlDcbxLocPfcPausePri4 Number of time PFC pause frames received for priority 4. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.81 |
| eqlDcbxLocPfcPausePri5 Number of time PFC pause frames received for priority 5. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.82 |
| eqlDcbxLocPfcPausePri6 Number of time PFC pause frames received for priority 6. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.83 |
| eqlDcbxLocPfcPausePri7 Number of time PFC pause frames received for priority 7. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.84 |
| eqlDcbxLocPfcUnpausePri0 Number of time PFC unpause frames received for priority 0. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.85 |
| eqlDcbxLocPfcUnpausePri1 Number of time PFC unpause frames received for priority 1. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.86 |
| eqlDcbxLocPfcUnpausePri2 Number of time PFC unpause frames received for priority 2. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.87 |
| eqlDcbxLocPfcUnpausePri3 Number of time PFC unpause frames received for priority 3. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.88 |
| eqlDcbxLocPfcUnpausePri4 Number of time PFC unpause frames received for priority 4. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.89 |
| eqlDcbxLocPFCMBC Indicates if the local system is capable of bypassing
MACSEC processing when MACSEC is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.2.1.9 |
| eqlDcbxLocPfcUnpausePri5 Number of time PFC unpause frames received for priority 5. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.90 |
| eqlDcbxLocPfcUnpausePri6 Number of time PFC unpause frames received for priority 6. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.91 |
| eqlDcbxLocPfcUnpausePri7 Number of time PFC unpause frames received for priority 7. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.19.1.2.1.92 |
| eqlDcbxLocETSConTsaTc0 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.93 |
| eqlDcbxLocETSConTsaTc1 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.94 |
| eqlDcbxLocETSConTsaTc2 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.95 |
| eqlDcbxLocETSConTsaTc3 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.96 |
| eqlDcbxLocETSConTsaTc4 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.97 |
| eqlDcbxLocETSConTsaTc5 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.98 |
| eqlDcbxLocETSConTsaTc6 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.2.1.99 |