eqlDcbxAdminETSConTrafficClassGroupBandwidthTable
EQL-DCB-MIB ·
.1.3.6.1.4.1.12740.19.1.1.1.10
Object
column
r/w
OctetString
Each octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
bandwidth in percent to be allocated to the traffic class
group. Valid values are between 0 and 100 inclusive. The
total of all eight octets must equal 100.
Note that an octet string is used instead of a table to enable
atomic programming of these values which is required to fulfill
the requirement that they always total to 100.
Context
- MIB
- EQL-DCB-MIB
- OID
.1.3.6.1.4.1.12740.19.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eqlDcbStaticIfEntry
- Table
- eqlDcbStaticIfTable
- Siblings
- 92
Syntax
OctetString
Values & Constraints
Object Constraints
range: 8-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlDcbxConfigTCSupportedTxEnable deprecated This field is deprecated. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.1 |
| eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTable Each octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
… | column | OctetString | .1.3.6.1.4.1.12740.19.1.1.1.11 |
| eqlDcbxAdminPFCWilling Indicates if the local system is willing to accept the
PFC configuration of the remote system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.12 |
| eqlDcbxAdminPFCMBC Indicates if the local system is capable of bypassing
MACSEC processing when MACSEC is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.13 |
| eqlDcbxAdminPFCCap Indicates the number of traffic classes on the local device
that may simultaneously have PFC enabled. | column | EqlDcbxSupportedCapacity | .1.3.6.1.4.1.12740.19.1.1.1.14 |
| eqlDcbxAdminAppPriorityWilling Indicates if the local system is willing to accept the
Application Priority configuration of the remote system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.15 |
| eqlDcbxConfigAutoDetectVLANEnable Enable automatic detection of VLAN ID. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.16 |
| eqlDcbxConfigVLANId VLAN ID to use for DCB. | column | EqlVlanIdentifier | .1.3.6.1.4.1.12740.19.1.1.1.17 |
| eqlDcbxAdminETSConTrafficClassGroupPri0 Indicates the traffic class group to which priority 0 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.18 |
| eqlDcbxAdminETSConTrafficClassGroupPri1 Indicates the traffic class group to which priority 1 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.19 |
| eqlDcbxConfigETSConfigurationTxEnable The eqlDcbxConfigETSConfigurationTxEnable, which is
defined as a truth value and configured by the network
management, determines whether the IEEE 802.1 organizationally
defined … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.2 |
| eqlDcbxAdminETSConTrafficClassGroupPri2 Indicates the traffic class group to which priority 2 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.20 |
| eqlDcbxAdminETSConTrafficClassGroupPri3 Indicates the traffic class group to which priority 3 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.21 |
| eqlDcbxAdminETSConTrafficClassGroupPri4 Indicates the traffic class group to which priority 4 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.22 |
| eqlDcbxAdminETSConTrafficClassGroupPri5 Indicates the traffic class group to which priority 5 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.23 |
| eqlDcbxAdminETSConTrafficClassGroupPri6 Indicates the traffic class group to which priority 6 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.24 |
| eqlDcbxAdminETSConTrafficClassGroupPri7 Indicates the traffic class group to which priority 7 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.25 |
| eqlDcbxAdminPFCEnableEnabledPri0 Indicates if PFC is enabled on priority 0 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.26 |
| eqlDcbxAdminPFCEnableEnabledPri1 Indicates if PFC is enabled on priority 1 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.27 |
| eqlDcbxAdminPFCEnableEnabledPri2 Indicates if PFC is enabled on priority 2 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.28 |
| eqlDcbxAdminPFCEnableEnabledPri3 Indicates if PFC is enabled on priority 3 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.29 |
| eqlDcbxConfigETSRecommendationTxEnable The eqlDcbxConfigETSRecommendationTxEnable, which is
defined as a truth value and configured by the network
management, determines whether the IEEE 802.1 organizationally
define… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.3 |
| eqlDcbxAdminPFCEnableEnabledPri4 Indicates if PFC is enabled on priority 4 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.30 |
| eqlDcbxAdminPFCEnableEnabledPri5 Indicates if PFC is enabled on priority 5 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.31 |
| eqlDcbxAdminPFCEnableEnabledPri6 Indicates if PFC is enabled on priority 6 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.32 |
| eqlDcbxAdminPFCEnableEnabledPri7 Indicates if PFC is enabled on priority 7 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.33 |
| eqlDcbxAdminAppPriorityiSCSITxEnable Indicates whether or not the iSCSI application priority
entry is transmitted as part ot the Application Priority
TLV. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.34 |
| eqlDcbxAdminAppPriorityiSCSIProtocol The protocol indicator used for iSCSI in the Application
Priority TLV. | column | EqlDcbxAppProtocol | .1.3.6.1.4.1.12740.19.1.1.1.35 |
| eqlDcbxAdminAppPriorityiSCSIPriority The priority value used for iSCSI in the Application
Priority TLV. | column | EqlIEEE8021PriorityValue | .1.3.6.1.4.1.12740.19.1.1.1.36 |
| eqlDcbxAdminAppPriorityFCoETxEnable Indicates whether or not the FCoE application priority
entry is transmitted as part ot the Application Priority
TLV. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.37 |
| eqlDcbxAdminAppPriorityFCoEProtocol The protocol indicator used for FCoE in the Application
Priority TLV. | column | EqlDcbxAppProtocol | .1.3.6.1.4.1.12740.19.1.1.1.38 |
| eqlDcbxAdminAppPriorityFCoEPriority The priority value used for FCoE in the Application
Priority TLV. | column | EqlIEEE8021PriorityValue | .1.3.6.1.4.1.12740.19.1.1.1.39 |
| eqlDcbxConfigPFCTxEnable The eqlDcbxConfigPFCTxEnable, which is defined
as a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
Priority-based… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.4 |
| eqlDcbxConfigDCBEnable Indicates whether or not DCB is enabled for this interface | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.40 |
| eqlDcbxConfigDCBX101Enable Indicates whether or not the transmit of DCBX 1.01 TLVs
is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.41 |
| eqlDcbxConfigDCBXIEEEDraftEnable Indicates whether or not the transmit of DCBX IEEE 802.1Qaz draft
TLVs is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.42 |
| eqlDcbxConfigQcnSubtype deprecated This field is deprecated. | column | EqlIEEEDraftSubtypeValue | .1.3.6.1.4.1.12740.19.1.1.1.43 |
| eqlDcbxConfigETSConSubtype deprecated This field is deprecated. | column | EqlIEEEDraftSubtypeValue | .1.3.6.1.4.1.12740.19.1.1.1.44 |
| eqlDcbxConfigETSRecoSubtype deprecated This field is deprecated. | column | EqlIEEEDraftSubtypeValue | .1.3.6.1.4.1.12740.19.1.1.1.45 |
| eqlDcbxConfigPFCSubtype deprecated This field is deprecated. | column | EqlIEEEDraftSubtypeValue | .1.3.6.1.4.1.12740.19.1.1.1.46 |
| eqlDcbxConfigAppPrioritySubtype deprecated This field is deprecated. | column | EqlIEEEDraftSubtypeValue | .1.3.6.1.4.1.12740.19.1.1.1.47 |
| eqlDcbxConfigTCSupportedSubtype deprecated This field is deprecated. | column | EqlIEEEDraftSubtypeValue | .1.3.6.1.4.1.12740.19.1.1.1.48 |
| eqlDcbxAdminETSRecoTrafficClassGroupPri0 Indicates the traffic class group to which priority 0 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.49 |
| eqlDcbxConfigAppPriorityTxEnable The eqlDcbxConfigAppPriorityTxEnable, which
is defined as a truth value and configured by the network
management, determines whether the IEEE 802.1 organizationally
defined Appli… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.5 |
| eqlDcbxAdminETSRecoTrafficClassGroupPri1 Indicates the traffic class group to which priority 1 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.50 |
| eqlDcbxAdminETSRecoTrafficClassGroupPri2 Indicates the traffic class group to which priority 2 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.51 |
| eqlDcbxAdminETSRecoTrafficClassGroupPri3 Indicates the traffic class group to which priority 3 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.52 |
| eqlDcbxAdminETSRecoTrafficClassGroupPri4 Indicates the traffic class group to which priority 4 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.53 |
| eqlDcbxAdminETSRecoTrafficClassGroupPri5 Indicates the traffic class group to which priority 5 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.54 |
| eqlDcbxAdminETSRecoTrafficClassGroupPri6 Indicates the traffic class group to which priority 6 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.55 |
| eqlDcbxAdminETSRecoTrafficClassGroupPri7 Indicates the traffic class group to which priority 7 is
to be assigned. | column | EqlDcbxTrafficClassGroupValue | .1.3.6.1.4.1.12740.19.1.1.1.56 |
| eqlDcbCnGlobalMasterEnable The state of the congestion notification feature on this bridge
component or system. If true, Congestion notification is
enabled, and if false, congestion notification is disable… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.57 |
| eqlDcbCnRpPortPriMaxRps An integer controlling the maximum number of Reaction Points
allowed for this CNPV on this Port. An end station SHALL
not create more than this many Reaction Point on this Port,
b… | column | Unsigned32 | .1.3.6.1.4.1.12740.19.1.1.1.58 |
| eqlDcbCnRpgEnablePri0 Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.59 |
| eqlDcbxConfigQcnTxEnable The eqlDcbxConfigQcnTxEnable, which is defined
as a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
Quantitized Co… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.6 |
| eqlDcbCnRpgEnablePri1 Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.60 |
| eqlDcbCnRpgEnablePri2 Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.61 |
| eqlDcbCnRpgEnablePri3 Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.62 |
| eqlDcbCnRpgEnablePri4 Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.63 |
| eqlDcbCnRpgEnablePri5 Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.64 |
| eqlDcbCnRpgEnablePri6 Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.65 |
| eqlDcbCnRpgEnablePri7 Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.66 |
| eqlDcbCnRpgTimeReset This object controls the value for all of the state machine
variables, rpgTimeReset, used to reset the timers RpWhile. | column | milliseconds SNMPv2-TCTimeInterval | .1.3.6.1.4.1.12740.19.1.1.1.67 |
| eqlDcbCnRpgByteReset This object controls the value for all of the state machine
variables, rpgByteReset, used to reset the counters
rpByteCount. | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.19.1.1.1.68 |
| eqlDcbCnRpgThreshold This object controls the number of times rpByteStage or
rpTimeStage can count before the
RP rate control state machine advances states. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.19.1.1.1.69 |
| eqlDcbxAdminTCSupported deprecated This field is deprecated. | column | EqlDcbxSupportedCapacity | .1.3.6.1.4.1.12740.19.1.1.1.7 |
| eqlDcbCnRpgMaxRate This object controls the maximum rate, in multiples of 1 Mbit/s,
at which an RP can transmit. Default value is the speed of the
port. A system SHALL support a minimim value for t… | column | Mbit/s SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.19.1.1.1.70 |
| eqlDcbCnRpgAiRate This object controls the transmission rate increment in the
RPR_ACTIVE_INCREASE state (rpgAiRate) in multiples of 1 Mbit/s.
This rate includes all bits consequent to transmitting … | column | Mbit/s SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.19.1.1.1.71 |
| eqlDcbCnRpgHaiRate This object controls the transmission rate increment in the
RPR_HYPER_INCREASE state (rpgHaiRate) in multiples of 1 Mbit/s.
This rate includes all bits consequent to transmitting … | column | Mbit/s SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.19.1.1.1.72 |
| eqlDcbCnRpgGd This object controls the number of bits that the value of the
Quantized Feedback field received in a CNM PDU is shifted to
the right to decrease rpTargetRate. rpgGd is thus 2 to t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.19.1.1.1.73 |
| eqlDcbCnRpgMinDecFac This object controls the minimum factor by which the current
RP transmit rate rpCurrentRate can be changed by reception
of a Congestion Notification Message. Its integer value
re… | column | percent Unsigned32 | .1.3.6.1.4.1.12740.19.1.1.1.74 |
| eqlDcbCnRpgMinRate This object controls the minimum transmission rate (rpgMinRate)
in multiples of 1 Mbit/s. A system SHALL support a value for
this object that is no larger than 5 Mbit/s per secon… | column | Mbit/s SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.19.1.1.1.75 |
| eqlDcbDefaultiSCSIPriority The default priority value used for iSCSI when no priority
value is negotiated through DCBX. | column | EqlIEEE8021PriorityValue | .1.3.6.1.4.1.12740.19.1.1.1.76 |
| eqlDcbDefaultFCoEPriority The default priority value used for FCoE when no priority
value is negotiated through DCBX. | column | EqlIEEE8021PriorityValue | .1.3.6.1.4.1.12740.19.1.1.1.77 |
| eqlDcbxAdminETSConTsaTc0 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.78 |
| eqlDcbxAdminETSConTsaTc1 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.79 |
| eqlDcbxAdminETSConMaxTCG Indicates the number of Traffic Class Groups supported on the
remote system. A value of 0 indicates that 8 Traffic Class
Groups are supported. | column | EqlDcbxSupportedCapacity | .1.3.6.1.4.1.12740.19.1.1.1.8 |
| eqlDcbxAdminETSConTsaTc2 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.80 |
| eqlDcbxAdminETSConTsaTc3 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.81 |
| eqlDcbxAdminETSConTsaTc4 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.82 |
| eqlDcbxAdminETSConTsaTc5 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.83 |
| eqlDcbxAdminETSConTsaTc6 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.84 |
| eqlDcbxAdminETSConTsaTc7 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.85 |
| eqlDcbxAdminETSRecoTsaTc0 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.86 |
| eqlDcbxAdminETSRecoTsaTc1 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.87 |
| eqlDcbxAdminETSRecoTsaTc2 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.88 |
| eqlDcbxAdminETSRecoTsaTc3 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.89 |
| eqlDcbxAdminETSConWilling Indicates if the local system is willing to accept the
ETS configuration recommended by the remote system. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.19.1.1.1.9 |
| eqlDcbxAdminETSRecoTsaTc4 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.90 |
| eqlDcbxAdminETSRecoTsaTc5 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.91 |
| eqlDcbxAdminETSRecoTsaTc6 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.92 |
| eqlDcbxAdminETSRecoTsaTc7 Indicates the transmission selection algorithm which is assigned
to this traffic class. | column | EqlDcbxTransmissionSelectionAlgorithm | .1.3.6.1.4.1.12740.19.1.1.1.93 |