etsysPwaSystemAuthInetAddress
ENTERASYS-PWA-MIB ·
.1.3.6.1.4.1.5624.1.2.8.1.10
Object
The IP address bound to the etsysPwaSystemAuthHostName. The format of this object is defined in the etsysPwaSystemAuthInetAddressType object. This address MUST be supplied for authentication to work. This is a globally unique address and must be the same value configured into every authenticating switch in the domain. Each switch terminates any IP traffic destined to this etsysPwaSystemAuthInetAddress. If the port is in either promiscousAuto(4) or auto(2) mode, described in the etsysPwaControlledPortControl object, then the local switch in question responds to http requests with a login page. If the port is in any other mode, then all traffic destined for etsysPwaSystemAuthInetAddress is discarded. Please note that neither the etsysPwaSystemAuthHostName object nor this object refer to any specific machine in the network. These objects are always relative to the connection between an end station and a switch. Traffic destined for this IP is never seen over interswitch links.
Context
- MIB
- ENTERASYS-PWA-MIB
- OID
.1.3.6.1.4.1.5624.1.2.8.1.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- etsysPwaSystem
- Siblings
- 17
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysPwaSystemAuthControl The administrative enable/disable state for Port Web
Authentication Control in a System. Enabling this object
turns on the PWA system. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.8.1.1 |
| etsysPwaSystemAuthEnhancedMode The enable state of the PWA enhanced mode. When this
feature is enabled users on unauthenticated ports will
be presented the login page on their initial web access.
The etsysPwaCo… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.8.1.11 |
| etsysPwaLogoDisplayStatus When this object is set to enabled, the secureharbour
logo will be displayed on the PWA login web pages.
When it is set to disabled, the logo will not be displayed. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.8.1.12 |
| etsysPwaSystemGuestUsername The username that the Guest Networking feature will use to
authenticate users that do not override this value in the
login page. | scalar | OctetString | .1.3.6.1.4.1.5624.1.2.8.1.13 |
| etsysPwaSystemGuestPassword The password that the Guest Networking feature will use to
authenticate users that do not override the guest username.
On a read this object will always return an empty string. | scalar | OctetString | .1.3.6.1.4.1.5624.1.2.8.1.14 |
| etsysPwaSystemGuestPasswordValid true(1) - indicates that etsysPwaGuestPassword was last set
with some value other than the empty string.
false(2) - indicates that etsysPwaGuestPassword has never
been… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5624.1.2.8.1.15 |
| etsysPwaSystemGuestNetworkingStatus Guest Networking is a feature that allows a user to get default
policy access to the network without having to know a username
or password. When this feature is not disabled(1), t… | scalar | Enumeration | .1.3.6.1.4.1.5624.1.2.8.1.16 |
| etsysPwaSystemEnhancedModeRefreshTime This is the value that is displayed on the PWA login success
page as the redirect time.
If a user, using PWA enhanced mode, enters a URL of
'http://enterasys.com' prio… | scalar | seconds Integer32 | .1.3.6.1.4.1.5624.1.2.8.1.17 |
| etsysPwaSystemAccountEnable When enabled(1), RADIUS accounting start, interim and
stop frames are sent to the configured RADIUS server(s).
When disabled(2), accounting packets are not sent to
th… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.8.1.18 |
| etsysPwaSystemAuthHostName This is the hostname part the Uniform Resource Locator
(URL). This object is a DNS/WINS name and is considered
to be bound to the etsysPwaSystemAuthIPAddress.
This object must no… | scalar | OctetString | .1.3.6.1.4.1.5624.1.2.8.1.2 |
| etsysPwaSystemAuthBanner The banner that will be displayed on the web login page
of the Port Web Authentication Control in a System. This
banner is a courtesy introduction to the network, which
the user … | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.5624.1.2.8.1.3 |
| etsysPwaSystemPwaNameServicesEnable The enable state of the name services application.
Enabling this object turns on the Domain Name Service
(DNS) and the Windows Internet Naming Services (WINS)
clients. These clie… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.8.1.4 |
| etsysPwaSystemAuthIPAddressType deprecated This object has been deprecated. Refer to
etsysPwaSystemAuthIPAddress for the reason.
The textual convention for InetAddressType
states that this object must be registered
immedi… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.5624.1.2.8.1.5 |
| etsysPwaSystemAuthIPAddress deprecated This object has been deprecated due to an incorrect
initial implementation of this MIB. This object was
originally an InetAddress but some versions of the E7
firmware implemented… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5624.1.2.8.1.6 |
| etsysPwaSystemAuthProtocol The authentication protocol used for this switch module.
When set to a chap(1), the authentication scheme used will
be the 'PPP Challenge Handshake Authentication Protocol
(CHAP… | scalar | Enumeration | .1.3.6.1.4.1.5624.1.2.8.1.7 |
| etsysPwaSystemAuthDomain The domain name for which this module resides in. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.5624.1.2.8.1.8 |
| etsysPwaSystemAuthInetAddressType A value that represents a type of
etsysPwaSystemAuthInetAddress.
unknown(0) An unknown address type. This value MUST
be used if the value of the correspon… | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.5624.1.2.8.1.9 |