etsysPolicyRuleStorageType
ENTERASYS-POLICY-PROFILE-MIB ·
.1.3.6.1.4.1.5624.1.2.6.11.6.1.8
Object
The storage type of this row.
When set to volatile(1) this entry's classification rule, as
referenced by etsysPolicyRulesOID, will be removed (if
present) from non-volatile storage. Rows created dynamically
by the device will typically report this as their default
storage type.
When set to nonVolatile(1) this entry's classification rule, as
referenced by etsysPolicyRulesOID, will be added to non-
volatile storage. This is the default value for rows created
as the result of external management.
Values of other(0), permanent(4), and readOnly(5) may not be
set, although they may be returned for rows created by the
device.
Context
- MIB
- ENTERASYS-POLICY-PROFILE-MIB
- OID
.1.3.6.1.4.1.5624.1.2.6.11.6.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- etsysPolicyRuleEntry
- Table
- etsysPolicyRuleTable
- Siblings
- 18
Values & Constraints
Type Values
1 | other |
2 | volatile |
3 | nonVolatile |
4 | permanent |
5 | readOnly |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysPolicyRuleProfileIndex The etsysPolicyProfileIndex for which the rule is defined.
A value of zero(0) has special meaning in that it scopes
rules which are used to determine the Policy Pro… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.6.1.1 |
| etsysPolicyRuleResult1 If the etsysPolicyRuleProfileIndex is 0 then this field is
read-only and defines the profile ID which will be assigned
to frames matching this rule. This is the dynamically assi… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.6.1.10 |
| etsysPolicyRuleResult2 If the etsysPolicyRuleProfileIndex is 0 then this field is
read-create and defines the profile ID which the managing
entity desires assigned to frames matching this rule. This
is… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.6.1.11 |
| etsysPolicyRuleAuditSyslogEnable Controls the sending of a syslog message when a bit in the
etsysPolicyRuleUsageList transitions from 0 to 1. | column | TriStateStatus | .1.3.6.1.4.1.5624.1.2.6.11.6.1.12 |
| etsysPolicyRuleAuditTrapEnable Controls the sending of an SNMP NOTIFICATION when a bit in the
etsysPolicyRuleUsageList transitions from 0 to 1. | column | TriStateStatus | .1.3.6.1.4.1.5624.1.2.6.11.6.1.13 |
| etsysPolicyRuleDisablePort Controls the disabling of a port (ifOperStatus of the
corresponding ifIndex will be down) when a bit in the
etsysPolicyRuleUsageList transitions from 0 to 1. When set to
enabled… | column | TriStateStatus | .1.3.6.1.4.1.5624.1.2.6.11.6.1.14 |
| etsysPolicyRuleOperPid If the etsysPolicyRuleProfileIndex is 0 then this field
contains the currently applied profile ID for frames
matching this rule. This may be either the administratively
applied … | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.6.1.15 |
| etsysPolicyRuleOverwriteTCI If set, the information contained within the TCI field of
inbound, tagged packets will not be used by the device after
the ingress classification stage of packet relay. The net … | column | TriStateStatus | .1.3.6.1.4.1.5624.1.2.6.11.6.1.16 |
| etsysPolicyRuleMirrorIndex A reference to a packet mirror destination (defined elsewhere).
A value of (-1) indicates no mirror is specified, but a mirror is
not explicitly prohibited.
… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.6.1.17 |
| etsysPolicyRuleQuarantineProfileIndex If the etsysPolicyRuleProfileIndex is not 0 this field defines
the profile ID which will be used as the quarantine provisioning
agents mux response for the mac address and port … | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.6.1.18 |
| etsysPolicyRuleHttpRedirectIndex A reference to a HTTP Redirect server group as specified by
the etsysPolicyHttpRedirectGroupIndex object.
A value of (-1) indicates no HTTP Redirect is specified, b… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.6.1.19 |
| etsysPolicyRuleType The type of network traffic reference by the
etsysPolicyRuleData. | column | PolicyClassificationRuleType | .1.3.6.1.4.1.5624.1.2.6.11.6.1.2 |
| etsysPolicyRuleData The data pattern to match against, as defined by the
etsysPolicyRuleType, encoded in network-byte order. | column | OctetString | .1.3.6.1.4.1.5624.1.2.6.11.6.1.3 |
| etsysPolicyRulePrefixBits The relevant number of bits defined by the
etsysPolicyRuleData, to be used when matching against a
frame, relevant bits are specified in longest-prefix-first
style (left to righ… | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.6.1.4 |
| etsysPolicyRulePortType The port number on which the rule will be applied. Zero(0)
is a special case, indicating that the rule should be applied
to all ports. | column | PortPolicyProfileIndexTypeTC | .1.3.6.1.4.1.5624.1.2.6.11.6.1.5 |
| etsysPolicyRulePort The port number on which the rule will be applied. Zero(0)
is a special case, indicating that the rule should be applied
to all ports. | column | Integer32 | .1.3.6.1.4.1.5624.1.2.6.11.6.1.6 |
| etsysPolicyRuleRowStatus The status of this row.
When set to active(1) this entry's classification rule, as
referenced by etsysPolicyRulesOID, becomes one of
its associated policy's set o… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.5624.1.2.6.11.6.1.7 |
| etsysPolicyRuleUsageList When read, a set bit indicates that this rule was used to
classify traffic on the corresponding port. When set, the
native PortList will be bit-wise AND'ed with the set PortList… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.5624.1.2.6.11.6.1.9 |